@@ -223,11 +223,11 @@ static u16 slim_slicesize(int code)
/**
* slim_xfer_msg() - Transfer a value info message on slim device
*
- * @sbdev: slim device to which this msg has to be transfered
+ * @sbdev: slim device to which this msg has to be transferred
* @msg: value info message pointer
* @mc: message code of the message
*
- * Called by drivers which want to transfer a vlaue or info elements.
+ * Called by drivers which want to transfer a value or info elements.
*
* Return: -ETIMEDOUT: If transmission of this message timed out
*/
@@ -124,7 +124,7 @@ static void qcom_slim_queue_tx(struct qcom_slim_ctrl *ctrl, void *buf,
__iowrite32_copy(ctrl->base + tx_reg, buf, count);
- /* Ensure Oder of subsequent writes */
+ /* Ensure Order of subsequent writes */
mb();
}
@@ -260,7 +260,7 @@ enum slim_ch_aux_bit_fmt {
* struct slim_channel - SLIMbus channel, used for state machine
*
* @id: ID of channel
- * @prrate: Presense rate of channel from Table 66 of SLIMbus 2.0 Specs
+ * @prrate: Presence rate of channel from Table 66 of SLIMbus 2.0 Specs
* @seg_dist: segment distribution code from Table 20 of SLIMbus 2.0 Specs
* @data_fmt: Data format of channel.
* @aux_fmt: Aux format for this channel.
@@ -368,7 +368,7 @@ struct slim_stream_runtime {
* @get_laddr: It is possible that controller needs to set fixed logical
* address table and get_laddr can be used in that case so that controller
* can do this assignment. Use case is when the master is on the remote
- * processor side, who is resposible for allocating laddr.
+ * processor side, who is responsible for allocating laddr.
* @wakeup: This function pointer implements controller-specific procedure
* to wake it up from clock-pause. Framework will call this to bring
* the controller out of clock pause.
Fixed some confusing typos that were currently identified with codespell, the details are as follows: -in the code comments: drivers/slimbus/messaging.c:226: transfered ==> transferred drivers/slimbus/messaging.c:230: vlaue ==> value drivers/slimbus/qcom-ctrl.c:127: Oder ==> Order drivers/slimbus/slimbus.h:263: Presense ==> Presence drivers/slimbus/slimbus.h:371: resposible ==> responsible Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> --- drivers/slimbus/messaging.c | 4 ++-- drivers/slimbus/qcom-ctrl.c | 2 +- drivers/slimbus/slimbus.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-)