| Message ID | 20241007081543.3475027-1-quic_vpernami@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] bus: mhi: host: pci_generic: Add support for QDU100 device | expand |
On Mon, Oct 07, 2024 at 01:45:41PM +0530, Vivek Pernamitta wrote: > Add MHI controller configuration for QDU100 device. > > This Qualcomm QDU100 device is inline accelerator card > which is an extension to QRU100 5G RAN platform. > which is designed to simplify 5G deployments by offering > a turnkey solution for ease of deployment with O-RAN > fronthaul and 5G NR layer 1 High (L1 High) processing, > and to accelerate operator and infrastructure vendor > adoption of virtualized RAN platforms. > > Currently IP_SW1/2 channel support is not present in > mhi_net driver, will be supporting them in future. I don't know what column width you are using, but please use 75 columns for patch descriptions. > > https://docs.qualcomm.com/bundle/publicresource/87-79371-1_REV_A_Qualcomm_X100_5G_RAN_Accelerator_Card_Product_Brief.pdf > Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com> > > --- > changes from V1: > - Changing naming convention from modem_qcom_qdu100* > to mhi_qcom_qdu100* > - Added more commit test for IP_SW1/2 channels. > - Fixed and corrected by passing mhi_pci_dev_info struct > instead of mhi_controller_config. > --- > --- > drivers/bus/mhi/host/pci_generic.c | 60 ++++++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c > index 9938bb034c1c..b9b7dd8d9411 100644 > --- a/drivers/bus/mhi/host/pci_generic.c > +++ b/drivers/bus/mhi/host/pci_generic.c > @@ -245,6 +245,63 @@ struct mhi_pci_dev_info { > .channel = ch_num, \ > } > > +static const struct mhi_channel_config mhi_qcom_qdu100_channels[] = { > + MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 2), > + MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 2), > + MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 128, 1), > + MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 128, 1), > + MHI_CHANNEL_CONFIG_UL(4, "DIAG", 64, 3), > + MHI_CHANNEL_CONFIG_DL(5, "DIAG", 64, 3), > + MHI_CHANNEL_CONFIG_UL(9, "QDSS", 64, 3), > + MHI_CHANNEL_CONFIG_UL(14, "NMEA", 32, 4), > + MHI_CHANNEL_CONFIG_DL(15, "NMEA", 32, 4), > + MHI_CHANNEL_CONFIG_UL(16, "CSM_CTRL", 32, 4), > + MHI_CHANNEL_CONFIG_DL(17, "CSM_CTRL", 32, 4), > + MHI_CHANNEL_CONFIG_UL(40, "MHI_PHC", 32, 4), > + MHI_CHANNEL_CONFIG_DL(41, "MHI_PHC", 32, 4), > + MHI_CHANNEL_CONFIG_UL(46, "IP_SW0", 256, 5), > + MHI_CHANNEL_CONFIG_DL(47, "IP_SW0", 256, 5), > + MHI_CHANNEL_CONFIG_UL(48, "IP_SW1", 256, 6), > + MHI_CHANNEL_CONFIG_DL(49, "IP_SW1", 256, 6), > + MHI_CHANNEL_CONFIG_UL(50, "IP_SW2", 256, 7), > + MHI_CHANNEL_CONFIG_DL(51, "IP_SW2", 256, 7), Please drop these unsupported IP_SW channels until you add support in mhi-net driver. > +}; > + > +static struct mhi_event_config mhi_qcom_qdu100_events[] = { > + /* first ring is control+data ring */ > + MHI_EVENT_CONFIG_CTRL(0, 64), > + /* SAHARA dedicated event ring */ > + MHI_EVENT_CONFIG_SW_DATA(1, 256), > + /* Software channels dedicated event ring */ > + MHI_EVENT_CONFIG_SW_DATA(2, 64), > + MHI_EVENT_CONFIG_SW_DATA(3, 256), > + MHI_EVENT_CONFIG_SW_DATA(4, 256), > + /* Software IP channels dedicated event ring */ > + MHI_EVENT_CONFIG_SW_DATA(5, 512), > + MHI_EVENT_CONFIG_SW_DATA(6, 512), > + MHI_EVENT_CONFIG_SW_DATA(7, 512), > +}; > + > +static const struct mhi_controller_config mhi_qcom_qdu100_config = { > + .max_channels = 128, > + .timeout_ms = 120000, > + .num_channels = ARRAY_SIZE(mhi_qcom_qdu100_channels), > + .ch_cfg = mhi_qcom_qdu100_channels, > + .num_events = ARRAY_SIZE(mhi_qcom_qdu100_events), > + .event_cfg = mhi_qcom_qdu100_events, > +}; > + > +static const struct mhi_pci_dev_info mhi_qcom_qdu100_info = { > + .name = "qcom-lassen", I don't think you can use internal chip name in the drivers. Please use the actual chip code like QDU100. > + .fw = "qcom/lassen/xbl_s.melf", > + .edl = "qcom/lassen/edl.mbn", Could you please push these fw to linux-firmware repo? This is a requirement to get this patch accepted. I should've imposed this at the start itself... > + .edl_trigger = true, > + .config = &mhi_qcom_qdu100_config, > + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, > + .dma_data_width = 32, > + .sideband_wake = false, > +}; > + > static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = { > MHI_CHANNEL_CONFIG_UL(4, "DIAG", 16, 1), > MHI_CHANNEL_CONFIG_DL(5, "DIAG", 16, 1), > @@ -822,6 +879,9 @@ static const struct pci_device_id mhi_pci_id_table[] = { > /* NETPRISMA FCUN69 (SDX6X) */ > { PCI_DEVICE(PCI_VENDOR_ID_NETPRISMA, 0x1001), > .driver_data = (kernel_ulong_t) &mhi_netprisma_fcun69_info }, > + /* QDU100, x100-DU */ > + { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0601), > + .driver_data = (kernel_ulong_t)&mhi_qcom_qdu100_info }, Spare after (kernel_ulong_t) and also sort the entries as per the comment above mhi_pci_id_table[]. - Mani
diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c index 9938bb034c1c..b9b7dd8d9411 100644 --- a/drivers/bus/mhi/host/pci_generic.c +++ b/drivers/bus/mhi/host/pci_generic.c @@ -245,6 +245,63 @@ struct mhi_pci_dev_info { .channel = ch_num, \ } +static const struct mhi_channel_config mhi_qcom_qdu100_channels[] = { + MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 2), + MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 2), + MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 128, 1), + MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 128, 1), + MHI_CHANNEL_CONFIG_UL(4, "DIAG", 64, 3), + MHI_CHANNEL_CONFIG_DL(5, "DIAG", 64, 3), + MHI_CHANNEL_CONFIG_UL(9, "QDSS", 64, 3), + MHI_CHANNEL_CONFIG_UL(14, "NMEA", 32, 4), + MHI_CHANNEL_CONFIG_DL(15, "NMEA", 32, 4), + MHI_CHANNEL_CONFIG_UL(16, "CSM_CTRL", 32, 4), + MHI_CHANNEL_CONFIG_DL(17, "CSM_CTRL", 32, 4), + MHI_CHANNEL_CONFIG_UL(40, "MHI_PHC", 32, 4), + MHI_CHANNEL_CONFIG_DL(41, "MHI_PHC", 32, 4), + MHI_CHANNEL_CONFIG_UL(46, "IP_SW0", 256, 5), + MHI_CHANNEL_CONFIG_DL(47, "IP_SW0", 256, 5), + MHI_CHANNEL_CONFIG_UL(48, "IP_SW1", 256, 6), + MHI_CHANNEL_CONFIG_DL(49, "IP_SW1", 256, 6), + MHI_CHANNEL_CONFIG_UL(50, "IP_SW2", 256, 7), + MHI_CHANNEL_CONFIG_DL(51, "IP_SW2", 256, 7), +}; + +static struct mhi_event_config mhi_qcom_qdu100_events[] = { + /* first ring is control+data ring */ + MHI_EVENT_CONFIG_CTRL(0, 64), + /* SAHARA dedicated event ring */ + MHI_EVENT_CONFIG_SW_DATA(1, 256), + /* Software channels dedicated event ring */ + MHI_EVENT_CONFIG_SW_DATA(2, 64), + MHI_EVENT_CONFIG_SW_DATA(3, 256), + MHI_EVENT_CONFIG_SW_DATA(4, 256), + /* Software IP channels dedicated event ring */ + MHI_EVENT_CONFIG_SW_DATA(5, 512), + MHI_EVENT_CONFIG_SW_DATA(6, 512), + MHI_EVENT_CONFIG_SW_DATA(7, 512), +}; + +static const struct mhi_controller_config mhi_qcom_qdu100_config = { + .max_channels = 128, + .timeout_ms = 120000, + .num_channels = ARRAY_SIZE(mhi_qcom_qdu100_channels), + .ch_cfg = mhi_qcom_qdu100_channels, + .num_events = ARRAY_SIZE(mhi_qcom_qdu100_events), + .event_cfg = mhi_qcom_qdu100_events, +}; + +static const struct mhi_pci_dev_info mhi_qcom_qdu100_info = { + .name = "qcom-lassen", + .fw = "qcom/lassen/xbl_s.melf", + .edl = "qcom/lassen/edl.mbn", + .edl_trigger = true, + .config = &mhi_qcom_qdu100_config, + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, + .dma_data_width = 32, + .sideband_wake = false, +}; + static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = { MHI_CHANNEL_CONFIG_UL(4, "DIAG", 16, 1), MHI_CHANNEL_CONFIG_DL(5, "DIAG", 16, 1), @@ -822,6 +879,9 @@ static const struct pci_device_id mhi_pci_id_table[] = { /* NETPRISMA FCUN69 (SDX6X) */ { PCI_DEVICE(PCI_VENDOR_ID_NETPRISMA, 0x1001), .driver_data = (kernel_ulong_t) &mhi_netprisma_fcun69_info }, + /* QDU100, x100-DU */ + { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0601), + .driver_data = (kernel_ulong_t)&mhi_qcom_qdu100_info }, { } }; MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
Add MHI controller configuration for QDU100 device. This Qualcomm QDU100 device is inline accelerator card which is an extension to QRU100 5G RAN platform. which is designed to simplify 5G deployments by offering a turnkey solution for ease of deployment with O-RAN fronthaul and 5G NR layer 1 High (L1 High) processing, and to accelerate operator and infrastructure vendor adoption of virtualized RAN platforms. Currently IP_SW1/2 channel support is not present in mhi_net driver, will be supporting them in future. https://docs.qualcomm.com/bundle/publicresource/87-79371-1_REV_A_Qualcomm_X100_5G_RAN_Accelerator_Card_Product_Brief.pdf Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com> --- changes from V1: - Changing naming convention from modem_qcom_qdu100* to mhi_qcom_qdu100* - Added more commit test for IP_SW1/2 channels. - Fixed and corrected by passing mhi_pci_dev_info struct instead of mhi_controller_config. --- --- drivers/bus/mhi/host/pci_generic.c | 60 ++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)