@@ -357,7 +357,6 @@ BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
domain_idle_states: domain-idle-states {
CLUSTER_SLEEP_PC: cluster-sleep-0 {
compatible = "domain-idle-state";
- idle-state-name = "cluster-l3-power-collapse";
arm,psci-suspend-param = <0x41000044>;
entry-latency-us = <2752>;
exit-latency-us = <3048>;
@@ -366,7 +365,6 @@ CLUSTER_SLEEP_PC: cluster-sleep-0 {
CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
compatible = "domain-idle-state";
- idle-state-name = "cluster-cx-retention";
arm,psci-suspend-param = <0x41001244>;
entry-latency-us = <3638>;
exit-latency-us = <4562>;
@@ -375,7 +373,6 @@ CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
compatible = "domain-idle-state";
- idle-state-name = "cluster-power-down";
arm,psci-suspend-param = <0x4100b244>;
entry-latency-us = <3263>;
exit-latency-us = <6562>;
@@ -287,7 +287,6 @@ CLUSTER_C4: cpu-sleep-0 {
domain-idle-states {
CLUSTER_CL4: cluster-sleep-0 {
compatible = "domain-idle-state";
- idle-state-name = "l2-ret";
arm,psci-suspend-param = <0x01000044>;
entry-latency-us = <350>;
exit-latency-us = <500>;
@@ -296,7 +295,6 @@ CLUSTER_CL4: cluster-sleep-0 {
CLUSTER_CL5: cluster-sleep-1 {
compatible = "domain-idle-state";
- idle-state-name = "ret-pll-off";
arm,psci-suspend-param = <0x01000054>;
entry-latency-us = <2200>;
exit-latency-us = <2500>;
"idle-state-name" is not a valid property for "domain-idle-state" binding, so drop it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> --- Alternatively, the property could be added to the binding. In that case, the 2 idle state bindings should be refactored with the common properties factored out. Since no one seems to have cared despite reported warnings on every new board of these platforms, I don't either and went with the simple change. arch/arm64/boot/dts/qcom/sc7180.dtsi | 3 --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 2 -- 2 files changed, 5 deletions(-)