From patchwork Fri Oct 18 19:12:32 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Taniya Das X-Patchwork-Id: 13842234 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id BD71817DFF2; Fri, 18 Oct 2024 19:13:39 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729278821; cv=none; b=FYKmmyqLYjEL3UbZhlIJ6LVSdgyKylOzxrGOMdfBE9LtSPCQtTH1j2al8aBws+o50xz14qyQN+Z5YmAlPz3rp6fAs7xQvx6QzaPI+OgbN/FWLUqLPLhs+sUHuWWwnLnP6mI0QtVViPBVnXOWSDGb3i/DRfMgYSp8cWVzftecxC4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729278821; c=relaxed/simple; bh=on252EOBJ1jqnAtvUjMeEbnJg232zDtbtf+oJu26tYE=; h=From:Date:Subject:MIME-Version:Content-Type:Message-ID:References: In-Reply-To:To:CC; b=KVTULlEAeh86lB2ALzEqxJemjp2hNAwNyLENZOP2ysjH/Gjn13HJM3m7o4AsoZqa2c+e0JIXo1cJCsltQM7Yp0uTxBiHp0/0Yp0Gw9w4TU06gKfKaVn9NlWTgWT4B17yA+3FzVC+2Lfah09GKA5dyZMAlfb43fFBqfKvXEWMoOk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=lVKtDyHq; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="lVKtDyHq" Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 49IEujZi029139; Fri, 18 Oct 2024 19:12:57 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= nxM8Y+Bt7L65cFGgUqb5swxflPoed6e6iuhemXfVjJE=; b=lVKtDyHqyVVVTqLg HFxHLAx8jcim8MB6D0Maml7Y61Dy0E4+ITT853CwD6mzTOyYXoU25VmifHFi8D0F Kl6XdoGAMW+ry0ZzXIH3+ihHaZZb+VZodFlejPij4kpkt7UJMc5S7dCxK7P0RlX3 bve2SqyyqLvrus/jfBU311C3idT+bAtg1tZqNVJGT1d+qDASP8WDnwP4Z0t90hJ8 P6HO0/Vc6fkxLiuIgI024qgt3ZfkZ7hh9yHS+G4eHDGMWXCm/tCvXMesB93vsM/6 bS+732Qzaam6MwB8RLoPMOTrIeAeXO5auNxfCAK83bJsR8C7eoUl1XTeECFe0MuU f1joWQ== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 42bhbqaaq6-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 18 Oct 2024 19:12:57 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 49IJCuPA003752 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 18 Oct 2024 19:12:56 GMT Received: from hu-tdas-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Fri, 18 Oct 2024 12:12:50 -0700 From: Taniya Das Date: Sat, 19 Oct 2024 00:42:32 +0530 Subject: [PATCH 02/12] clk: qcom: clk-alpha-pll: Add support for dynamic update for slewing PLLs Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-ID: <20241019-qcs615-mm-clockcontroller-v1-2-9f1ca2048287@quicinc.com> References: <20241019-qcs615-mm-clockcontroller-v1-0-9f1ca2048287@quicinc.com> In-Reply-To: <20241019-qcs615-mm-clockcontroller-v1-0-9f1ca2048287@quicinc.com> To: Bjorn Andersson , Michael Turquette , Stephen Boyd , Abhishek Sahu , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Catalin Marinas , Will Deacon CC: Ajit Pandey , Imran Shaik , Jagadeesh Kona , "Stephen Boyd" , , , , , , "Taniya Das" X-Mailer: b4 0.15-dev-aa3f6 X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: T6zmkiSJbJP-zQCWmlm0WsX5ei4sgfWf X-Proofpoint-GUID: T6zmkiSJbJP-zQCWmlm0WsX5ei4sgfWf X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 adultscore=0 lowpriorityscore=0 spamscore=0 phishscore=0 mlxscore=0 bulkscore=0 clxscore=1015 suspectscore=0 mlxlogscore=999 priorityscore=1501 impostorscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2410180122 The alpha PLLs which slew to a new frequency at runtime would require the PLL to calibrate at the mid point of the VCO. Add the new PLL ops which can support the slewing of the PLL to a new frequency. Signed-off-by: Taniya Das --- drivers/clk/qcom/clk-alpha-pll.c | 172 +++++++++++++++++++++++++++++++++++++++ drivers/clk/qcom/clk-alpha-pll.h | 1 + 2 files changed, 173 insertions(+) diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c index 03cc7aa092480bfdd9eaa986d44f0545944b3b89..6f51bdd2b500ceeccbca0aefd5003df10ad1e1ae 100644 --- a/drivers/clk/qcom/clk-alpha-pll.c +++ b/drivers/clk/qcom/clk-alpha-pll.c @@ -2758,3 +2758,175 @@ const struct clk_ops clk_alpha_pll_regera_ops = { .set_rate = clk_zonda_pll_set_rate, }; EXPORT_SYMBOL_GPL(clk_alpha_pll_regera_ops); + +static int clk_alpha_pll_slew_update(struct clk_alpha_pll *pll) +{ + int ret = 0; + u32 val; + + regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE, PLL_UPDATE); + regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val); + + ret = wait_for_pll_update(pll); + if (ret) + return ret; + /* + * Hardware programming mandates a wait of at least 570ns before polling the LOCK + * detect bit. Have a delay of 1us just to be safe. + */ + mb(); + udelay(1); + + return wait_for_pll_enable_lock(pll); +} + +static int clk_alpha_pll_slew_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + unsigned long freq_hz; + const struct pll_vco *curr_vco, *vco; + u32 l, alpha_width = pll_alpha_width(pll); + u64 a; + + freq_hz = alpha_pll_round_rate(rate, parent_rate, &l, &a, alpha_width); + if (freq_hz != rate) { + pr_err("alpha_pll: Call clk_set_rate with rounded rates!\n"); + return -EINVAL; + } + + curr_vco = alpha_pll_find_vco(pll, clk_hw_get_rate(hw)); + if (!curr_vco) { + pr_err("alpha pll: not in a valid vco range\n"); + return -EINVAL; + } + + vco = alpha_pll_find_vco(pll, freq_hz); + if (!vco) { + pr_err("alpha pll: not in a valid vco range\n"); + return -EINVAL; + } + + /* + * Dynamic pll update will not support switching frequencies across + * vco ranges. In those cases fall back to normal alpha set rate. + */ + if (curr_vco->val != vco->val) + return clk_alpha_pll_set_rate(hw, rate, parent_rate); + + a = a << (ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH); + + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll), a >> 32); + + /* Ensure that the write above goes through before proceeding. */ + mb(); + + if (clk_hw_is_enabled(hw)) + return clk_alpha_pll_slew_update(pll); + + return 0; +} + +/* + * Slewing plls should be bought up at frequency which is in the middle of the + * desired VCO range. So after bringing up the pll at calibration freq, set it + * back to desired frequency(that was set by previous clk_set_rate). + */ +static int clk_alpha_pll_calibrate(struct clk_hw *hw) +{ + unsigned long calibration_freq, freq_hz; + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + struct clk_hw *parent; + const struct pll_vco *vco; + u64 a; + u32 l, alpha_width = pll_alpha_width(pll); + int rc; + + parent = clk_hw_get_parent(hw); + if (!parent) { + pr_err("alpha pll: no valid parent found\n"); + return -EINVAL; + } + + vco = alpha_pll_find_vco(pll, clk_hw_get_rate(hw)); + if (!vco) { + pr_err("alpha pll: not in a valid vco range\n"); + return -EINVAL; + } + + /* + * As during slewing plls vco_sel won't be allowed to change, vco table + * should have only one entry table, i.e. index = 0, find the + * calibration frequency. + */ + calibration_freq = (pll->vco_table[0].min_freq + pll->vco_table[0].max_freq) / 2; + + freq_hz = alpha_pll_round_rate(calibration_freq, clk_hw_get_rate(parent), + &l, &a, alpha_width); + if (freq_hz != calibration_freq) { + pr_err("alpha_pll: call clk_set_rate with rounded rates!\n"); + return -EINVAL; + } + + /* Setup PLL for calibration frequency */ + a <<= (ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH); + + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll), a >> 32); + + regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_VCO_MASK << PLL_VCO_SHIFT, + vco->val << PLL_VCO_SHIFT); + + /* Bringup the pll at calibration frequency */ + rc = clk_alpha_pll_enable(hw); + if (rc) { + pr_err("alpha pll calibration failed\n"); + return rc; + } + + /* + * PLL is already running at calibration frequency. + * So slew pll to the previously set frequency. + */ + freq_hz = alpha_pll_round_rate(clk_hw_get_rate(hw), + clk_hw_get_rate(parent), &l, &a, alpha_width); + + pr_debug("pll %s: setting back to required rate %lu, freq_hz %ld\n", + clk_hw_get_name(hw), clk_hw_get_rate(hw), freq_hz); + + /* Setup the PLL for the new frequency */ + a <<= (ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH); + + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll), a >> 32); + + regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_ALPHA_EN, PLL_ALPHA_EN); + + return clk_alpha_pll_slew_update(pll); +} + +static int clk_alpha_pll_slew_enable(struct clk_hw *hw) +{ + int rc; + + rc = clk_alpha_pll_calibrate(hw); + if (rc) + return rc; + + rc = clk_alpha_pll_enable(hw); + + return rc; +} + +const struct clk_ops clk_alpha_pll_slew_ops = { + .enable = clk_alpha_pll_slew_enable, + .disable = clk_alpha_pll_disable, + .recalc_rate = clk_alpha_pll_recalc_rate, + .round_rate = clk_alpha_pll_round_rate, + .set_rate = clk_alpha_pll_slew_set_rate, +}; +EXPORT_SYMBOL(clk_alpha_pll_slew_ops); diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h index 55eca04b23a1fc3f3554f43a8fdd329a524dad0e..f149d10247bd4a85521940a1255cd019bde4729a 100644 --- a/drivers/clk/qcom/clk-alpha-pll.h +++ b/drivers/clk/qcom/clk-alpha-pll.h @@ -195,6 +195,7 @@ extern const struct clk_ops clk_alpha_pll_rivian_evo_ops; #define clk_alpha_pll_postdiv_rivian_evo_ops clk_alpha_pll_postdiv_fabia_ops extern const struct clk_ops clk_alpha_pll_regera_ops; +extern const struct clk_ops clk_alpha_pll_slew_ops; void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, const struct alpha_pll_config *config);