diff mbox series

[v2] arm64: dts: qcom: x1e80100-crd Rename "Twitter" to "Tweeter"

Message ID 20241019190214.3337-2-maccraft123mc@gmail.com (mailing list archive)
State New
Headers show
Series [v2] arm64: dts: qcom: x1e80100-crd Rename "Twitter" to "Tweeter" | expand

Commit Message

Maya Matuszczyk Oct. 19, 2024, 7:02 p.m. UTC 
This makes the name consistent with both other x1e80100 devices and the
dictionary. A UCM fix was merged already and is required in order for
sound to work after this commit.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Konrad Dybcio Oct. 21, 2024, 9:25 a.m. UTC | #1 
On 19.10.2024 9:02 PM, Maya Matuszczyk wrote:
> This makes the name consistent with both other x1e80100 devices and the
> dictionary. A UCM fix was merged already and is required in order for
> sound to work after this commit.
> 
> Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 10b28d870f08..004353220dc5 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -177,9 +177,9 @@  sound {
 		compatible = "qcom,x1e80100-sndcard";
 		model = "X1E80100-CRD";
 		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
-				"TwitterLeft IN", "WSA WSA_SPK2 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
 				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
-				"TwitterRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
 				"AMIC2", "MIC BIAS2",
@@ -933,7 +933,7 @@  left_tweeter: speaker@0,1 {
 		reg = <0 1>;
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
-		sound-name-prefix = "TwitterLeft";
+		sound-name-prefix = "TweeterLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l12b_1p2>;
 		qcom,port-mapping = <4 5 6 7 11 13>;
@@ -986,7 +986,7 @@  right_tweeter: speaker@0,1 {
 		reg = <0 1>;
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
-		sound-name-prefix = "TwitterRight";
+		sound-name-prefix = "TweeterRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l12b_1p2>;
 		qcom,port-mapping = <4 5 6 7 11 13>;