diff mbox series

[1/5] clk: qcom: apss-ipq-pll: drop 'alpha_en_mask' from IPQ5018 PLL config

Message ID 20241021-alpha-mode-cleanup-v1-1-55df8ed73645@gmail.com (mailing list archive)
State New
Headers show
Series clk: qcom: remove superfluous alpha settings from PLL configs | expand

Commit Message

Gabor Juhos Oct. 21, 2024, 8:21 p.m. UTC 
Since neither 'alpha' nor 'alpha_hi' is defined in the configuration,
those will be initialized with zero values  implicitly. By using zero
alpha values, the output rate of the PLL will be the same whether
alpha mode is enabled or not.

Remove the superfluous initialization of the 'alpha_en_mask' member
to make it clear that enabling alpha mode is not required to get the
desired output rate.

No functional changes, the initial rate of the PLL is the same both
before and after the patch.

Tested on TP-Link Archer AX55 v1 (IPQ5018).

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
---
 drivers/clk/qcom/apss-ipq-pll.c | 1 -
 1 file changed, 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index e8632db2c542806e9527a22b54fe169e3e398a7a..dec2a5019cc77bf60142a86453883e336afc860f 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -73,7 +73,6 @@  static const struct alpha_pll_config ipq5018_pll_config = {
 	.main_output_mask = BIT(0),
 	.aux_output_mask = BIT(1),
 	.early_output_mask = BIT(3),
-	.alpha_en_mask = BIT(24),
 	.status_val = 0x3,
 	.status_mask = GENMASK(10, 8),
 	.lock_det = BIT(2),