From patchwork Thu Nov 7 17:02:53 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?b?QmFybmFiw6FzIEN6w6ltw6Fu?= X-Patchwork-Id: 13866782 Received: from mail.mainlining.org (mail.mainlining.org [5.75.144.95]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 0B6C9216DE7; Thu, 7 Nov 2024 17:03:12 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=5.75.144.95 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730998998; cv=none; b=h1ZI6VSPqTt9nqByt7ZWk+T6TpMDyop9wFDkzJtzQzePM/0g+h5Nta+/o9FzmvSnwVBJycIvs23JGzmjoZpDhzLZFVVp6C+cWDE3JBO8IkfZFgZeJeumUN6ZPs9XmWZmktHdNRx5wdepC+7H6m/H5iIrvVaBGflw6fl0vIcTBV8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730998998; c=relaxed/simple; bh=rpnMxo36Tob8+PWnDpJfJXBBXFt0Kxg9duZR243hjgU=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=dtjMK3jSw/Eb2EFH/skNvPbNDbOlo6TlGxPf5GrUnqonZUZTmyD7LKrQh2Z2LIsxkNMuc8JzY7FoIH/WmxGwPEUBs+KMHxRxx37jaSll0cCdLMmoUSrtaRcGgvOXOMBGfq/pw99RnnBJ7ROELUjoh9lCE7GznWIZ9OVJ827n5eM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=mainlining.org; spf=pass smtp.mailfrom=mainlining.org; dkim=pass (2048-bit key) header.d=mainlining.org header.i=@mainlining.org header.b=kC4eu8Un; arc=none smtp.client-ip=5.75.144.95 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=mainlining.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=mainlining.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=mainlining.org header.i=@mainlining.org header.b="kC4eu8Un" Received: from [192.168.118.162] (254C2715.nat.pool.telekom.hu [37.76.39.21]) by mail.mainlining.org (Postfix) with ESMTPSA id 1A5C2E45C7; Thu, 7 Nov 2024 17:03:09 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mainlining.org; s=psm; t=1730998990; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=KcVAxQ2qNrm5pTAfHNxkoVCIISQ0fzOXw9ZW+beb0LI=; b=kC4eu8Unqcj2tqnq2ctG93LlM4Onu4dNvpICe8ovX5iRsZaStds6zQI8/Z60hwf5Q1rC8y uik2KNHYQMbcxifJQDZQS57gCG8BudUvVkqua45wZ4FLv5wwNa0x6VDcu9QckXCmYPrnS/ ZtncNsOrEowvjOnPNHikbHCwkfJwl8Sna3kyXGLLOAxF6E7dyWquqeFNrMOAPOezbnHI34 3PHqZC82dRVdmkJs2V9VMVgLMoUNLcVkgP8p+V4tLDWh1gjwQgT1q4m/DAV3kaM8sUXKO3 4VMuNUxeoKjjwMdXYhh0irPX+KOHcKDHFb6UX20a5evIZhtXrhs50Ns5uh5LFg== From: =?utf-8?b?QmFybmFiw6FzIEN6w6ltw6Fu?= Date: Thu, 07 Nov 2024 18:02:53 +0100 Subject: [PATCH v3 12/14] arm64: dts: qcom: Add initial support for MSM8917 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241107-msm8917-v3-12-6ddc5acd978b@mainlining.org> References: <20241107-msm8917-v3-0-6ddc5acd978b@mainlining.org> In-Reply-To: <20241107-msm8917-v3-0-6ddc5acd978b@mainlining.org> To: Bjorn Andersson , Linus Walleij , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Konrad Dybcio , Lee Jones , Amit Kucheria , Thara Gopinath , "Rafael J. Wysocki" , Daniel Lezcano , Zhang Rui , Lukasz Luba , Joerg Roedel , Will Deacon , Robin Murphy , Srinivas Kandagatla Cc: linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, iommu@lists.linux.dev, =?utf-8?b?QmFybmFiw6Fz?= =?utf-8?b?IEN6w6ltw6Fu?= , =?utf-8?q?Otto_P?= =?utf-8?q?fl=C3=BCger?= X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1730998970; l=47863; i=barnabas.czeman@mainlining.org; s=20240730; h=from:subject:message-id; bh=B5Z8fPXbvD1BxOhp4pmFnNIL8xcwbzvHS6Wq7l2OA4Y=; b=3ikWQbe+D5fJHD2CKgZQyuXcT3MYAuIjUFKU/mDOSTDF4+uTh95xY+fnaw3mFi6q8k8SnIgZ6 7o6IaBKuHVkCgAHTlKN//v3HpNcd1sXY7DGhiSnFXrJzCgirMYf7ahZ X-Developer-Key: i=barnabas.czeman@mainlining.org; a=ed25519; pk=TWUSIGgwW/Sn4xnX25nw+lszj1AT/A3bzkahn7EhOFc= From: Otto Pflüger Add initial support for MSM8917 SoC. Signed-off-by: Otto Pflüger [reword commit, rebase, fix schema errors] Signed-off-by: Barnabás Czémán --- arch/arm64/boot/dts/qcom/msm8917.dtsi | 2007 +++++++++++++++++++++++++++++++++ 1 file changed, 2007 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8917.dtsi b/arch/arm64/boot/dts/qcom/msm8917.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..f7446dd7d44c9f2db6d309a817c0e58cbd143b5c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8917.dtsi @@ -0,0 +1,2007 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { }; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&cpu_pd0>; + power-domain-names = "psci"; + }; + + cpu1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&cpu_pd1>; + power-domain-names = "psci"; + }; + + cpu2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&cpu_pd2>; + power-domain-names = "psci"; + }; + + cpu3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&cpu_pd3>; + power-domain-names = "psci"; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + domain-idle-states { + cluster_pwrdn: cluster-gdhs { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000043>; + entry-latency-us = <240>; + exit-latency-us = <280>; + min-residency-us = <806>; + }; + + cluster_pc: cluster-power-collapse { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000053>; + entry-latency-us = <700>; + exit-latency-us = <1000>; + min-residency-us = <6500>; + }; + + cluster_ret: cluster-retention { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000023>; + entry-latency-us = <700>; + exit-latency-us = <650>; + min-residency-us = <1972>; + }; + + }; + + idle-states { + entry-method = "psci"; + + cpu_sleep_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <125>; + exit-latency-us = <180>; + min-residency-us = <595>; + local-timer-stop; + }; + }; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8916", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cluster_pd: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_pwrdn>, <&cluster_ret>, <&cluster_pc>; + }; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cpu_sleep_0>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cpu_sleep_0>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cpu_sleep_0>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cpu_sleep_0>; + }; + }; + + rpm: remoteproc { + compatible = "qcom,msm8917-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8917", "qcom,smd-rpm"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8917", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8917-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = ; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = ; + }; + + rpmpd_opp_svs: opp5 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = ; + }; + }; + }; + }; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + qseecom_mem: qseecom@85b00000 { + reg = <0x0 0x85b00000 0x0 0x800000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + reserved@86400000 { + reg = <0x0 0x86400000 0x0 0x400000>; + no-map; + }; + + mpss_mem: mpss@86800000 { + /* + * The memory region for the mpss firmware is generally + * relocatable and could be allocated dynamically. + * However, many firmware versions tend to fail when + * loaded to some special addresses, so it is hard to + * define reliable alloc-ranges. + * + * alignment = <0x0 0x400000>; + * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + */ + reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */ + no-map; + status = "disabled"; + }; + + rmtfs@92100000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x92100000 0x0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + adsp_mem: adsp { + size = <0x0 0x1100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + mba_mem: mba { + size = <0x0 0x100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + venus_mem: venus { + size = <0x0 0x400000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + wcnss_mem: wcnss { + size = <0x0 0x700000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apcs 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = ; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x60000 0x8000>; + }; + + usb_hs_phy: phy@6c000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x6c000 0x200>; + #phy-cells = <0>; + clocks = <&xo_board>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "ahb", "sleep"; + resets = <&gcc GCC_QUSB2_PHY_BCR>, + <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + qfprom: qfprom@a4000 { + compatible = "qcom,msm8917-qfprom", "qcom,qfprom"; + reg = <0xa4000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@1d8 { + reg = <0x1d8 1>; + bits = <0 8>; + }; + + tsens_s5_p1: s5-p1@1d9 { + reg = <0x1d9 1>; + bits = <0 6>; + }; + + tsens_s5_p2: s5-p2@1d9 { + reg = <0x1d9 2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@1da { + reg = <0x1da 2>; + bits = <4 6>; + }; + + tsens_s6_p2: s6-p2@1db { + reg = <0x1db 1>; + bits = <2 6>; + }; + + tsens_s7_p1: s7-p1@1dc { + reg = <0x1dc 1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@1dc { + reg = <0x1dc 2>; + bits = <6 6>; + }; + + tsens_s8_p1: s8-p1@1dd { + reg = <0x1dd 2>; + bits = <4 6>; + }; + + tsens_s8_p2: s8-p2@1de { + reg = <0x1de 1>; + bits = <2 6>; + }; + + tsens_base2: base2@1df { + reg = <0x1df 1>; + bits = <0 8>; + }; + + tsens_mode: mode@210 { + reg = <0x210 1>; + bits = <0 3>; + }; + + tsens_s0_p1: s0-p1@210 { + reg = <0x210 2>; + bits = <3 6>; + }; + + tsens_s0_p2: s0-p2@211 { + reg = <0x211 1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@211 { + reg = <0x211 2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@212 { + reg = <0x212 2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@213 { + reg = <0x213 2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@214 { + reg = <0x214 1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@214 { + reg = <0x214 2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@215 { + reg = <0x215 2>; + bits = <5 6>; + }; + + tsens_s4_p1: s4-p1@216 { + reg = <0x216 2>; + bits = <3 6>; + }; + + tsens_s4_p2: s4-p2@217 { + reg = <0x217 1>; + bits = <1 6>; + }; + + tsens_s9_p1: s9-p1@230{ + reg = <0x230 1>; + bits = <0 6>; + }; + + tsens_s9_p2: s9-p2@230 { + reg = <0x230 2>; + bits = <6 6>; + }; + + tsens_s10_p1: s10-p1@231 { + reg = <0x231 2>; + bits = <4 6>; + }; + + tsens_s10_p2: s10-p2@232 { + reg = <0x232 1>; + bits = <2 6>; + }; + }; + + rng@e3000 { + compatible = "qcom,prng"; + reg = <0xe3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8937-tsens", "qcom,tsens-v1"; + reg = <0x4a9000 0x1000>, + <0x4a8000 0x1000>; + interrupts = ; + interrupt-names = "uplow"; + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>, + <&tsens_s10_p1>, <&tsens_s10_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2", + "s10_p1", "s10_p2"; + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x4ab000 0x4>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8917-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart1_default: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + i2c2_default: i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_default: i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_default: i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_clk_on: sdc1-clk-on-state { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: sdc1-clk-off-state { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: sdc1-cmd-on-state { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <10>; + }; + + sdc1_cmd_off: sdc1-cmd-off-state { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_data_on: sdc1-data-on-state { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc1_data_off: sdc1-data-off-state { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: sdc1-rclk-on-state { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: sdc1-rclk-off-state { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc2_clk_on: sdc2-clk-on-state { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_clk_off: sdc2-clk-off-state { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc2_cmd_on: sdc2-cmd-on-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_cmd_off: sdc2-cmd-off-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_cd_on: cd-on-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_off: cd-off-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_data_on: sdc2-data-on-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data_off: sdc2-data-off-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + spi3_default: spi3-default-state { + cs-pins { + pins = "gpio10"; + function = "blsp_spi3"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + }; + + spi3_sleep: spi3-sleep-state { + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi6_default: spi6-default-state { + cs0-pins { + pins = "gpio47"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + + cs1-pins { + pins = "gpio22"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + }; + + spi6_sleep: spi6-sleep-state { + cs0-pins { + pins = "gpio47"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cs1-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + wcnss_pin_a: wcnss-active-state { + wcss-wlan-pins { + pins = "gpio79", "gpio80"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan0-pins { + pins = "gpio78"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan1-pins { + pins = "gpio77"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan2-pins { + pins = "gpio76"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + + }; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8917"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x1800000 0x80000>; + clocks = <&xo_board>, + <&sleep_clk>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x1905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8917", "syscon"; + reg = <0x1937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x1a00000 0x1000>, + <0x1ab0000 0x1040>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdp: display-controller@1a01000 { + compatible = "qcom,msm8917-mdp5", "qcom,mdp5"; + reg = <0x1a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 0x15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@1a94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x1a94000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&mdss_dsi0_phy>; + + operating-points-v2 = <&mdss_dsi0_opp_table>; + power-domains = <&rpmpd MSM8917_VDDCX>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0_phy: phy@1a94a00 { + compatible = "qcom,dsi-phy-28nm-8937"; + reg = <0x1a94a00 0xd4>, + <0x1a94400 0x280>, + <0x1a94b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "ref"; + }; + }; + + apps_iommu: iommu@1e20000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1e20000 0x20000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + + qcom,iommu-secure-id = <17>; + + /* VFE */ + iommu-ctx@14000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x14000 0x1000>; + interrupts = ; + }; + + /* MDP_0 */ + iommu-ctx@15000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x15000 0x1000>; + interrupts = ; + }; + + /* VENUS_NS */ + iommu-ctx@16000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x16000 0x1000>; + interrupts = ; + }; + }; + + gpu_iommu: iommu@1f08000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + + compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1"; + + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <18>; + + iommu-ctx@0 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0 0x1000>; + interrupts = ; + }; + }; + + gpu: gpu@1c00000 { + compatible = "qcom,adreno-306.32", "qcom,adreno"; + reg = <0x1c00000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "gfx3d"; + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>; + power-domains = <&gcc OXILI_GX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + #cooling-cells = <2>; + + iommus = <&gpu_iommu 0>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + }; + + opp-523200000 { + opp-hz = /bits/ 64 <523200000>; + }; + + opp-484800000 { + opp-hz = /bits/ 64 <484800000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + }; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x200f000 0x001000>, + <0x2400000 0x800000>, + <0x2c00000 0x800000>, + <0x3800000 0x200000>, + <0x200a000 0x002100>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x4044000 0x19000>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, + <0x7824000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + power-domains = <&rpmpd MSM8917_VDDCX>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7864900 0x500>, + <0x7864000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + power-domains = <&rpmpd MSM8917_VDDCX>; + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x7884000 0x1f000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + num-channels = <12>; + qcom,num-ees = <4>; + qcom,ee = <0>; + }; + + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x7ac4000 0x1d000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + num-channels = <10>; + qcom,num-ees = <4>; + qcom,ee = <0>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + }; + + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x78b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@7af6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x7af6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi6_default>; + pinctrl-1 = <&spi6_sleep>; + pinctrl-names = "default", "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78db000 { + compatible = "qcom,ci-hdrc"; + reg = <0x78db000 0x200>, + <0x78db200 0x200>; + interrupts = , + ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + }; + + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0xa204000 0x2000>, + <0xa202000 0x1000>, + <0xa21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8917_VDDCX>, + <&rpmpd MSM8917_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-0 = <&wcnss_pin_a>; + pinctrl-names = "default"; + + status = "disabled"; + + wcnss_iris: iris { + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = ; + + mboxes = <&apcs 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = , + ; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xb000000 0x1000>, + <0xb002000 0x1000>; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0xb011000 0x1000>; + #mbox-cells = <1>; + clocks = <&a53pll>, <&gcc GPLL0_EARLY>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + }; + + a53pll: clock@b016000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0xb016000 0x40>; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <0>; + operating-points-v2 = <&pll_opp_table>; + + pll_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + }; + }; + + watchdog@b017000 { + compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; + reg = <0xb017000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + clock-frequency = <19200000>; + + frame@b121000 { + frame-number = <0>; + interrupts = , + ; + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = ; + reg = <0xb123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = ; + reg = <0xb124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = ; + reg = <0xb125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = ; + reg = <0xb126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = ; + reg = <0xb127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = ; + reg = <0xb128000 0x1000>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + clock-frequency = <19200000>; + }; + + thermal_zones: thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + camera_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + cooling-maps { + map0 { + trip = <&cpuss1_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpuss1_crit: cpuss1-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpuss1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + cooling-maps { + map0 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu0_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu0_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + cooling-maps { + map0 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu1_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu1_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + cooling-maps { + map0 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu2_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu2_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu2_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + cooling-maps { + map0 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu3_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu3_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu3_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpu_crit: gpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + + gpu_alert: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + }; + + }; + + mdm-core-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + mdm_core_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + q6_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; +};