| Message ID | 20241112-qps615_pwr-v3-2-29a1e98aa2b0@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: Enable Power and configure the QPS615 PCIe switch | expand |
On Tue, Nov 12, 2024 at 08:31:34PM +0530, Krishna chaitanya chundru wrote: > Add QPS615 PCIe switch node which has 3 downstream ports and in one > downstream port two embedded ethernet devices are present. > > Power to the QPS615 is supplied through two LDO regulators, controlled > by two GPIOs, these are added as fixed regulators. And the QPS615 is > configured through i2c. > > Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 115 +++++++++++++++++++++++++++ > arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +- > 2 files changed, 116 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts > index 0d45662b8028..0e890841b600 100644 > --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts > +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts > @@ -202,6 +202,30 @@ vph_pwr: vph-pwr-regulator { > regulator-min-microvolt = <3700000>; > regulator-max-microvolt = <3700000>; > }; > + > + vdd_ntn_0p9: regulator-vdd-ntn-0p9 { > + compatible = "regulator-fixed"; > + regulator-name = "VDD_NTN_0P9"; > + gpio = <&pm8350c_gpios 2 GPIO_ACTIVE_HIGH>; > + regulator-min-microvolt = <899400>; > + regulator-max-microvolt = <899400>; > + enable-active-high; > + pinctrl-0 = <&ntn_0p9_en>; > + pinctrl-names = "default"; > + regulator-enable-ramp-delay = <4300>; > + }; > + > + vdd_ntn_1p8: regulator-vdd-ntn-1p8 { > + compatible = "regulator-fixed"; > + regulator-name = "VDD_NTN_1P8"; > + gpio = <&pm8350c_gpios 3 GPIO_ACTIVE_HIGH>; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + enable-active-high; > + pinctrl-0 = <&ntn_1p8_en>; > + pinctrl-names = "default"; > + regulator-enable-ramp-delay = <10000>; > + }; > }; > > &apps_rsc { > @@ -684,6 +708,75 @@ &mdss_edp_phy { > status = "okay"; > }; > > +&pcie1_port { > + pcie@0,0 { > + compatible = "pci1179,0623"; > + reg = <0x10000 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + > + device_type = "pci"; > + ranges; > + bus-range = <0x2 0xff>; > + > + vddc-supply = <&vdd_ntn_0p9>; > + vdd18-supply = <&vdd_ntn_1p8>; > + vdd09-supply = <&vdd_ntn_0p9>; > + vddio1-supply = <&vdd_ntn_1p8>; > + vddio2-supply = <&vdd_ntn_1p8>; > + vddio18-supply = <&vdd_ntn_1p8>; > + > + i2c-parent = <&i2c0 0x77>; > + > + reset-gpios = <&pm8350c_gpios 1 GPIO_ACTIVE_LOW>; > + > + pcie@1,0 { > + reg = <0x20800 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + > + device_type = "pci"; > + ranges; > + bus-range = <0x3 0xff>; > + }; > + > + pcie@2,0 { > + reg = <0x21000 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + > + device_type = "pci"; > + ranges; > + bus-range = <0x4 0xff>; > + }; > + > + pcie@3,0 { > + reg = <0x21800 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges; > + bus-range = <0x5 0xff>; > + > + pcie@0,0 { > + reg = <0x50000 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges; > + }; > + > + pcie@0,1 { > + reg = <0x50100 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges; > + }; > + }; > + }; > +}; > + > &pmk8350_rtc { > status = "okay"; > }; > @@ -812,6 +905,28 @@ lt9611_rst_pin: lt9611-rst-state { > }; > }; > > +&pm8350c_gpios { > + ntn_0p9_en: ntn-0p9-en-state { > + pins = "gpio2"; > + function = "normal"; > + > + bias-disable; > + input-disable; > + output-enable; > + power-source = <0>; > + }; > + > + ntn_1p8_en: ntn-1p8-en-state { > + pins = "gpio3"; > + function = "normal"; > + > + bias-disable; > + input-disable; > + output-enable; > + power-source = <0>; > + }; > +}; > + > &tlmm { > lt9611_irq_pin: lt9611-irq-state { > pins = "gpio24"; > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 3d8410683402..82434f085ff0 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -2279,7 +2279,7 @@ pcie1: pcie@1c08000 { > > status = "disabled"; > > - pcie@0 { > + pcie1_port: pcie@0 { > device_type = "pci"; > reg = <0x0 0x0 0x0 0x0 0x0>; > bus-range = <0x01 0xff>; > > -- > 2.34.1 >
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index 0d45662b8028..0e890841b600 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -202,6 +202,30 @@ vph_pwr: vph-pwr-regulator { regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; }; + + vdd_ntn_0p9: regulator-vdd-ntn-0p9 { + compatible = "regulator-fixed"; + regulator-name = "VDD_NTN_0P9"; + gpio = <&pm8350c_gpios 2 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <899400>; + regulator-max-microvolt = <899400>; + enable-active-high; + pinctrl-0 = <&ntn_0p9_en>; + pinctrl-names = "default"; + regulator-enable-ramp-delay = <4300>; + }; + + vdd_ntn_1p8: regulator-vdd-ntn-1p8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_NTN_1P8"; + gpio = <&pm8350c_gpios 3 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + pinctrl-0 = <&ntn_1p8_en>; + pinctrl-names = "default"; + regulator-enable-ramp-delay = <10000>; + }; }; &apps_rsc { @@ -684,6 +708,75 @@ &mdss_edp_phy { status = "okay"; }; +&pcie1_port { + pcie@0,0 { + compatible = "pci1179,0623"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x2 0xff>; + + vddc-supply = <&vdd_ntn_0p9>; + vdd18-supply = <&vdd_ntn_1p8>; + vdd09-supply = <&vdd_ntn_0p9>; + vddio1-supply = <&vdd_ntn_1p8>; + vddio2-supply = <&vdd_ntn_1p8>; + vddio18-supply = <&vdd_ntn_1p8>; + + i2c-parent = <&i2c0 0x77>; + + reset-gpios = <&pm8350c_gpios 1 GPIO_ACTIVE_LOW>; + + pcie@1,0 { + reg = <0x20800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x3 0xff>; + }; + + pcie@2,0 { + reg = <0x21000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x4 0xff>; + }; + + pcie@3,0 { + reg = <0x21800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x5 0xff>; + + pcie@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + + pcie@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + }; + }; +}; + &pmk8350_rtc { status = "okay"; }; @@ -812,6 +905,28 @@ lt9611_rst_pin: lt9611-rst-state { }; }; +&pm8350c_gpios { + ntn_0p9_en: ntn-0p9-en-state { + pins = "gpio2"; + function = "normal"; + + bias-disable; + input-disable; + output-enable; + power-source = <0>; + }; + + ntn_1p8_en: ntn-1p8-en-state { + pins = "gpio3"; + function = "normal"; + + bias-disable; + input-disable; + output-enable; + power-source = <0>; + }; +}; + &tlmm { lt9611_irq_pin: lt9611-irq-state { pins = "gpio24"; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 3d8410683402..82434f085ff0 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2279,7 +2279,7 @@ pcie1: pcie@1c08000 { status = "disabled"; - pcie@0 { + pcie1_port: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>;
Add QPS615 PCIe switch node which has 3 downstream ports and in one downstream port two embedded ethernet devices are present. Power to the QPS615 is supplied through two LDO regulators, controlled by two GPIOs, these are added as fixed regulators. And the QPS615 is configured through i2c. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 115 +++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +- 2 files changed, 116 insertions(+), 1 deletion(-)