From patchwork Tue Nov 12 17:01:12 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Abel Vesa X-Patchwork-Id: 13872563 Received: from mail-wm1-f49.google.com (mail-wm1-f49.google.com [209.85.128.49]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6659020CCDD for ; Tue, 12 Nov 2024 17:01:38 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.49 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1731430901; cv=none; b=jzkfHNo/ZzmB1+VX9yuQszUzRi5D4dSGSjx9EiyB8e6mYSscU97CUi++yEFhOD0hPnHlp3oHghueoWWqycclCFusioMskzC8kpqzEvaZIjNw1cWWhmnvLVSRAqS8a2v/bPzRNVDzYJLS0rZIeAfEjCtPffqq7xbGs1i2RasSrE4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1731430901; c=relaxed/simple; bh=LDXOT+vCpdfHr57VcKzzMGulBvMnZO9j8Q9XwJpAIIM=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=M3IxP0SEpbEwtjIZZFnCJBFsMdqaGs+2ksvKblRbM+I3K0rIfXc7Qy//KSdsTn+98oOcd1RkCtXOFPvOiZia9Mm2uCN7pSjP3xjC+MpZkX4RmQZLNAdOAtqpoMigJqZ31H7mTSCwcWN6Mol4SSzNKgIk9xtpEgnp5YzK1mh0Slg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=AyXaaj3X; arc=none smtp.client-ip=209.85.128.49 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="AyXaaj3X" Received: by mail-wm1-f49.google.com with SMTP id 5b1f17b1804b1-4315f24a6bbso47014225e9.1 for ; Tue, 12 Nov 2024 09:01:38 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1731430897; x=1732035697; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=KQKCZ6YELnRXsg7GEQibOUEH/1jvz7J79Z8uSNgEggA=; b=AyXaaj3XAimpkb2WjxaOxTrU01OyrwtF5/nYN/FF0ZUMajpb1MNTMudfHLSEMdfrAz XRmzH7I2kIIJjzUNO5QddISEs4dzhgRmy+rdxRiUMQ8YSpb6ltq1zfdUgBdk0r7qZhE0 Bvpm87grZIZIwgvAMmRWsPJ3FFYy1ribdcmQJgT4dvBt3fxU5rbKsB80ThdRDSgtoE90 boSOnVth5BTBwYtmpadCPkxFuQHyKxzepgo59/mii0KSDlUOPmi8UWwH++Z4nYyH+ka4 Qph9h8d4ReXVR2mfMwfXlUG7cxHgcUyEEnBgACOjpSx9JeUYf6XtRL0ZMIRa4U0A+xve jgZg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1731430897; x=1732035697; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=KQKCZ6YELnRXsg7GEQibOUEH/1jvz7J79Z8uSNgEggA=; b=wUyvKqWiyDXAEdVqhpvQjmyO3+ZOP6x0pklmXVM12zZtnyOTkSGHZpg/CcTxM7NXb0 yHj3paNRIqAergtGrOJCxgLU4KkiFuzrAU9LqHYCSAhnZRaRdDrswxu+/YLATT4uC1yL +4vqn2/o979RgNHA3g/VEVsFgt7i5B2fJo3eIBL6MGS1qz9EoGuUWslBatue3Z0VKsAE JK0b5Bj4sXglc6jH/NheHQ4oQXa6QsMSa8Htb2bFAtJhhbcFNIKSmK2mA2Tg0ugLXamd Vb1nKpo3XLBup0OeFS0yrvgBDjn6QU83052f8QoLnR+N/Rj/GF2IaSyj2Zvsilv2T2EA 4WmQ== X-Forwarded-Encrypted: i=1; AJvYcCWkRXcN5ZBx8MTvy7ZETPmo8N297tQh8p1jMbBkbTk2kW8+6BPCcnjD8j37a5LpI9Nn2c5Vj6+xYTb9p+aB@vger.kernel.org X-Gm-Message-State: AOJu0YzyKArgPp/LD5DJpfEXSX19+whijfXEu6+O7MyI7pHi2gfdbKmJ ZFVQp44QuW1qGeOLU98sDFC1OvjFuKT95MUXzs8Xv0kB9N1Bnp4IHwxyTZ5EwoE= X-Google-Smtp-Source: AGHT+IHKYqOaDXcqy68er/UTZkhx8ANA7OhW2W0nfkWLDHJiDvt/gZEX67dr4fqnYuIHDbOS7QnVIg== X-Received: by 2002:a05:600c:1e18:b0:431:5d4f:73b9 with SMTP id 5b1f17b1804b1-432b751826fmr155416015e9.26.1731430896575; Tue, 12 Nov 2024 09:01:36 -0800 (PST) Received: from [127.0.1.1] ([82.76.168.176]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-432b053051fsm215018895e9.6.2024.11.12.09.01.34 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 12 Nov 2024 09:01:36 -0800 (PST) From: Abel Vesa Date: Tue, 12 Nov 2024 19:01:12 +0200 Subject: [PATCH v5 3/6] arm64: dts: qcom: x1e80100-crd: Describe the Parade PS8830 retimers Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241112-x1e80100-ps8830-v5-3-4ad83af4d162@linaro.org> References: <20241112-x1e80100-ps8830-v5-0-4ad83af4d162@linaro.org> In-Reply-To: <20241112-x1e80100-ps8830-v5-0-4ad83af4d162@linaro.org> To: Heikki Krogerus , Greg Kroah-Hartman , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Bjorn Andersson , Konrad Dybcio Cc: Rajendra Nayak , Sibi Sankar , Johan Hovold , Dmitry Baryshkov , Trilok Soni , Christophe JAILLET , linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Abel Vesa X-Mailer: b4 0.15-dev-dedf8 X-Developer-Signature: v=1; a=openpgp-sha256; l=12392; i=abel.vesa@linaro.org; h=from:subject:message-id; bh=LDXOT+vCpdfHr57VcKzzMGulBvMnZO9j8Q9XwJpAIIM=; b=owEBbQKS/ZANAwAKARtfRMkAlRVWAcsmYgBnM4nlcdo3Krkik8Uqt1LHe4qObBdGEaNYStkfK loNdRS36qiJAjMEAAEKAB0WIQRO8+4RTnqPKsqn0bgbX0TJAJUVVgUCZzOJ5QAKCRAbX0TJAJUV VqT0EACGSnhe2er2P6z2hPzMa2DROyR2H9AHF5Hx431x9gDIdGUkx9xBzr7DalPOMiEiUBn2Vm+ ElrtcpRhqgkpZdiqN4rrt2DsRyCbW/SdV59cluEYJ2B2eCBSuDbUU+H8CJ3TU/GbOEjTPVP3nX+ shfILu2macpM91Mo3fB6ibtNjN4jDWm/B/gbb3LX+pwb9O103O+btemtg69zZzg9itv98LbLIRI yxRMx9SkRJSJHLl8PAhwVq2GZFm2PL+ek17+1Ezdu+B4/rDLhUAef0c3a9JnOPfypGMTTFxjWkp WAKM4kcUCIxZawCLjqqOkrYUP5ENVvd1IYu9/LxLCJjyMfCghvKYfRfNOX9Am3Uy5MmmDbBMRm7 JtEsclCfVq0X5rlv/VnhN/+5f/8fY0t+tDlBywSgpRghArmcmg1nWYbY8a2FOiNU1pzZhPfKgYG 6KoRGVdpkKMaXJBe1cRWBV0t2ItM2lZNJ4Wur4Tuuw8nwRjZSaBkTGBBRYP8/X2Ju0IoxjizVnw UvRyrgPoL43tI6IaDwb48CornwGgN7Kug4l59XNth76O1rPY7s+nv1zx7YJs3DSBQVq4Sw9k4S4 MKbNwQXt0jZGNDn6d5TfTsRoyD5NaZB8AqgLKv7ZZjZCk9sYjNURC6Ml+ODSvg0+6IFNqI/xGlB Mjl2VmN46IoN9nA== X-Developer-Key: i=abel.vesa@linaro.org; a=openpgp; fpr=6AFF162D57F4223A8770EF5AF7BF214136F41FAE The X Elite CRD board comes with 3 Parade PS8830 retimers, one for each Type-C port. These handle the orientation and altmode switching and are controlled over I2C. In the connection chain, they sit between the USB/DisplayPort combo PHY and the Type-C connector. Describe the retimers and all gpio controlled voltage regulators used by each retimer. Also, modify the pmic glink graph to include the retimers in between the SuperSpeed/Sideband in endpoints and the QMP PHY out endpoints. Signed-off-by: Abel Vesa --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 450 +++++++++++++++++++++++++++++- 1 file changed, 444 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index 39f9d9cdc10d8e79824b72288e2529536144fa9e..659520404adec33c3551f8d0a5ae3db9e0a18d44 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -100,7 +100,15 @@ port@1 { reg = <1>; pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; }; }; }; @@ -129,7 +137,15 @@ port@1 { reg = <1>; pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; }; }; }; @@ -158,7 +174,15 @@ port@1 { reg = <1>; pmic_glink_ss2_ss_in: endpoint { - remote-endpoint = <&usb_1_ss2_qmpphy_out>; + remote-endpoint = <&retimer_ss2_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss2_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss2_con_sbu_out>; }; }; }; @@ -311,6 +335,150 @@ vreg_nvme: regulator-nvme { regulator-boot-on; }; + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p15: regulator-rtmr2-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p8: regulator-rtmr2-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_3p3: regulator-rtmr2-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -735,6 +903,178 @@ keyboard@3a { }; }; +&i2c1 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK5>; + + vdd-supply = <&vreg_rtmr2_1p15>; + vdd33-supply = <&vreg_rtmr2_3p3>; + vdd33-cap-supply = <&vreg_rtmr2_3p3>; + vddar-supply = <&vreg_rtmr2_1p15>; + vddat-supply = <&vreg_rtmr2_1p15>; + vddio-supply = <&vreg_rtmr2_1p8>; + + reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr2_default>; + pinctrl-names = "default"; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss2_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss2_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss2_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss2_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + + }; + }; +}; + &i2c8 { clock-frequency = <400000>; @@ -883,6 +1223,26 @@ &pcie6a_phy { status = "okay"; }; +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + &pm8550ve_8_gpios { misc_3p3_reg_en: misc-3p3-reg-en-state { pins = "gpio6"; @@ -896,6 +1256,17 @@ misc_3p3_reg_en: misc-3p3-reg-en-state { }; }; +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + &pmc8380_3_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio4"; @@ -906,6 +1277,17 @@ edp_bl_en: edp-bl-en-state { }; }; +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + &qupv3_0 { status = "okay"; }; @@ -1135,6 +1517,20 @@ wake-n-pins { }; }; + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr2_default: rtmr2-reset-n-active-state { + pins = "gpio185"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tpad_default: tpad-default-state { pins = "gpio3"; function = "gpio"; @@ -1156,6 +1552,48 @@ reset-n-pins { }; }; + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state { + pins = "gpio189"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state { + pins = "gpio126"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state { + pins = "gpio187"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio191"; function = "gpio"; @@ -1202,7 +1640,7 @@ &usb_1_ss0_dwc3_hs { }; &usb_1_ss0_qmpphy_out { - remote-endpoint = <&pmic_glink_ss0_ss_in>; + remote-endpoint = <&retimer_ss0_ss_in>; }; &usb_1_ss1_hsphy { @@ -1230,7 +1668,7 @@ &usb_1_ss1_dwc3_hs { }; &usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; + remote-endpoint = <&retimer_ss1_ss_in>; }; &usb_1_ss2_hsphy { @@ -1258,5 +1696,5 @@ &usb_1_ss2_dwc3_hs { }; &usb_1_ss2_qmpphy_out { - remote-endpoint = <&pmic_glink_ss2_ss_in>; + remote-endpoint = <&retimer_ss2_ss_in>; };