[v6,10/10] arm64: dts: qcom: Add Xiaomi Redmi 5A

Message ID	20241113-msm8917-v6-10-c348fb599fef@mainlining.org (mailing list archive)
State	New
Headers	show Received: from mail.mainlining.org (mail.mainlining.org [5.75.144.95]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 035FD2076BF; Wed, 13 Nov 2024 15:12:04 +0000 (UTC) From: =?utf-8?b?QmFybmFiw6FzIEN6w6ltw6Fu?= <barnabas.czeman@mainlining.org> Date: Wed, 13 Nov 2024 16:11:51 +0100 Subject: [PATCH v6 10/10] arm64: dts: qcom: Add Xiaomi Redmi 5A Precedence: bulk MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Message-Id: <20241113-msm8917-v6-10-c348fb599fef@mainlining.org> References: <20241113-msm8917-v6-0-c348fb599fef@mainlining.org> In-Reply-To: <20241113-msm8917-v6-0-c348fb599fef@mainlining.org> To: Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konradybcio@kernel.org>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Amit Kucheria <amitk@kernel.org>, Thara Gopinath <thara.gopinath@gmail.com>, "Rafael J. Wysocki" <rafael@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org>, Zhang Rui <rui.zhang@intel.com>, Lukasz Luba <lukasz.luba@arm.com>, Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>, Robin Murphy <robin.murphy@arm.com>, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org, iommu@lists.linux.dev, =?utf-8?b?QmFybmFiw6Fz?= =?utf-8?b?IEN6w6ltw6Fu?= <barnabas.czeman@mainlining.org>
Series	Add MSM8917/PM8937/Redmi 5A \| expand [v6,00/10] Add MSM8917/PM8937/Redmi 5A [v6,01/10] arm64: dts: qcom: Add PM8937 PMIC [v6,02/10] dt-bindings: pinctrl: qcom: Add MSM8917 pinctrl [v6,03/10] pinctrl: qcom: Add MSM8917 tlmm pinctrl driver [v6,04/10] dt-bindings: thermal: tsens: Add MSM8937 [v6,05/10] thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens [v6,06/10] dt-bindings: iommu: qcom,iommu: Add MSM8917 IOMMU to SMMUv1 compatibles [v6,07/10] dt-bindings: nvmem: Add compatible for MS8917 [v6,08/10] arm64: dts: qcom: Add initial support for MSM8917 [v6,09/10] dt-bindings: arm: qcom: Add Xiaomi Redmi 5A [v6,10/10] arm64: dts: qcom: Add Xiaomi Redmi 5A

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 9bb8b191aeb517e8f1e3a11bca98a3d0c39c5398..7562406843cfd82397c4844d14a22e8bcf4bba74 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts new file mode 100644 index 0000000000000000000000000000000000000000..81bb76f1773252be2f60777acf93d51d01981f86 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts @@ -0,0 +1,297 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023, Barnabas Czeman + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include "msm8917.dtsi" +#include "pm8937.dtsi" + +/delete-node/ &qseecom_mem; + +/ { + model = "Xiaomi Redmi 5A (riva)"; + compatible = "xiaomi,riva", "qcom,msm8917"; + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_MSM8917 0>; + qcom,board-id = <0x1000b 2>, <0x2000b 2>; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3000000>; + energy-full-design-microwatt-hours = <11500000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4400000>; + precharge-current-microamp = <256000>; + charge-term-current-microamp = <60000>; + voltage-min-design-microvolt = <3400000>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + power-domains = <&gcc MDSS_GDSC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-volup { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + framebuffer_mem: memory@90001000 { + reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>; + no-map; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + vcc-supply = <&pm8937_l10>; + iovcc-supply = <&pm8937_l5>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + }; +}; + +&blsp2_i2c1 { + status = "okay"; + + bq27426@55 { + compatible = "ti,bq27426"; + reg = <0x55>; + monitored-battery = <&battery>; + }; + + bq25601@6b{ + compatible = "ti,bq25601"; + reg = <0x6b>; + monitored-battery = <&battery>; + + interrupt-parent = <&tlmm>; + interrupts = <61 IRQ_TYPE_EDGE_FALLING>; + + input-voltage-limit-microvolt = <4400000>; + input-current-limit-microamp = <1000000>; + }; +}; + +&pm8937_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8937-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + + vdd_l1_l19-supply = <&pm8937_s3>; + vdd_l2_l23-supply = <&pm8937_s3>; + vdd_l3-supply = <&pm8937_s3>; + vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>; + vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; + vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>; + + pm8937_s1: s1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pm8937_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8937_s4: s4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8937_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8937_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8937_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8937_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8937_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8937_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l19: l19 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8937_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8937_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + +}; + +&sdhc_1 { + vmmc-supply = <&pm8937_l8>; + vqmmc-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>; + vmmc-supply = <&pm8937_l11>; + vqmmc-supply = <&pm8937_l12>; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32768>; +}; + +&wcnss { + vddpx-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; + vddxo-supply = <&pm8937_l7>; + vddrfa-supply = <&pm8937_l19>; + vddpa-supply = <&pm8937_l9>; + vdddig-supply = <&pm8937_l5>; +}; + +&wcnss_mem { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +};

[v6,10/10] arm64: dts: qcom: Add Xiaomi Redmi 5A

Commit Message

Patch