@@ -27,6 +27,30 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ dp0-connector {
+ compatible = "dp-connector";
+ label = "DP0";
+ type = "full-size";
+
+ port {
+ dp0_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp0_out>;
+ };
+ };
+ };
+
+ dp1-connector {
+ compatible = "dp-connector";
+ label = "DP1";
+ type = "full-size";
+
+ port {
+ dp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp1_out>;
+ };
+ };
+ };
};
&apps_rsc {
@@ -421,6 +445,50 @@
status = "okay";
};
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp0 {
+ status = "okay";
+
+ pinctrl-0 = <&dp0_hot_plug_det>;
+ pinctrl-names = "default";
+};
+
+&mdss0_dp0_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+ remote-endpoint = <&dp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+};
+
+&mdss0_dp1 {
+ status = "okay";
+
+ pinctrl-0 = <&dp1_hot_plug_det>;
+ pinctrl-names = "default";
+};
+
+&mdss0_dp1_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+ remote-endpoint = <&dp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+};
+
&pmm8654au_0_gpios {
gpio-line-names = "DS_EN",
"POFF_COMPLETE",
@@ -527,6 +595,18 @@
};
&tlmm {
+ dp0_hot_plug_det: dp0-hot-plug-det-state {
+ pins = "gpio101";
+ function = "edp0_hot";
+ bias-disable;
+ };
+
+ dp1_hot_plug_det: dp1-hot-plug-det-state {
+ pins = "gpio102";
+ function = "edp1_hot";
+ bias-disable;
+ };
+
ethernet0_default: ethernet0-default-state {
ethernet0_mdc: ethernet0-mdc-pins {
pins = "gpio8";
Enable DPTX0 and DPTX1 along with their corresponding PHYs for sa8775p-ride platform. Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com> --- arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 80 ++++++++++++++++++++++ 1 file changed, 80 insertions(+)