@@ -402,16 +402,26 @@ static int clk_rcg2_fm_determine_rate(struct clk_hw *hw,
return _freq_tbl_fm_determine_rate(hw, rcg->freq_multi_tbl, req);
}
-static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
- u32 *_cfg)
+static int __clk_rcg2_configure_parent(struct clk_rcg2 *rcg, u8 src, u32 *_cfg)
{
- u32 cfg, mask, d_val, not2d_val, n_minus_m;
struct clk_hw *hw = &rcg->clkr.hw;
- int ret, index = qcom_find_src_index(hw, rcg->parent_map, f->src);
+ int index = qcom_find_src_index(hw, rcg->parent_map, src);
if (index < 0)
return index;
+ *_cfg &= ~CFG_SRC_SEL_MASK;
+ *_cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
+
+ return 0;
+}
+
+static int __clk_rcg2_configure_mnd(struct clk_rcg2 *rcg, const struct freq_tbl *f,
+ u32 *_cfg)
+{
+ u32 cfg, mask, d_val, not2d_val, n_minus_m;
+ int ret;
+
if (rcg->mnd_width && f->n) {
mask = BIT(rcg->mnd_width) - 1;
ret = regmap_update_bits(rcg->clkr.regmap,
@@ -440,9 +450,8 @@ static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
}
mask = BIT(rcg->hid_width) - 1;
- mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK;
+ mask |= CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK;
cfg = f->pre_div << CFG_SRC_DIV_SHIFT;
- cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
if (rcg->mnd_width && f->n && (f->m != f->n))
cfg |= CFG_MODE_DUAL_EDGE;
if (rcg->hw_clk_ctrl)
@@ -454,6 +463,22 @@ static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
return 0;
}
+static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
+ u32 *_cfg)
+{
+ int ret;
+
+ ret = __clk_rcg2_configure_parent(rcg, f->src, _cfg);
+ if (ret)
+ return ret;
+
+ ret = __clk_rcg2_configure_mnd(rcg, f, _cfg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
{
u32 cfg;
__clk_rcg2_configure function does 2 things - configures parent and mnd values. In order to be able to add new clock options, we should split. Move __clk_rcg2_configure logic on 2 functions: - __clk_rcg2_configure_parent which configures clock parent - __clk_rcg2_configure_mnd which configures mnd values __clk_rcg2_configure delegates to mentioned functions. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> --- drivers/clk/qcom/clk-rcg2.c | 37 +++++++++++++++++++++++++++++++------ 1 file changed, 31 insertions(+), 6 deletions(-)