new file mode 100644
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6150 Display DPU
+
+maintainers:
+ - Abhinav Kumar <quic_abhinavk@quicinc.com>
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6150-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display ahb clock
+ - description: Display hf axi clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm6150-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&dispcc_mdss_mdp_clk>,
+ <&dispcc_mdss_vsync_clk>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc_mdss_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf0_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-575000000 {
+ opp-hz = /bits/ 64 <575000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+...
new file mode 100644
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6150 Display MDSS
+
+maintainers:
+ - Abhinav Kumar <quic_abhinavk@quicinc.com>
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SM6150 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm6150-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,sm6150-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm6150-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,sm6150-dsi-phy-14nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,sm6150-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem", "cpu-cfg";
+
+ power-domains = <&dispcc_mdss_gdsc>;
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&dispcc_mdss_mdp_clk>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x800 0x0>;
+
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm6150-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&dispcc_mdss_mdp_clk>,
+ <&dispcc_mdss_vsync_clk>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc_mdss_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf0_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-575000000 {
+ opp-hz = /bits/ 64 <575000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm6150-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc_mdss_byte0_clk>,
+ <&dispcc_mdss_byte0_intf_clk>,
+ <&dispcc_mdss_pclk0_clk>,
+ <&dispcc_mdss_esc0_clk>,
+ <&dispcc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc_mdss_byte0_clk_src>,
+ <&dispcc_mdss_pclk0_clk_src>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi0_opp_table>;
+
+ phys = <&mdss_dsi0_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-164000000 {
+ opp-hz = /bits/ 64 <164000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,sm6150-dsi-phy-14nm";
+ reg = <0x0ae94400 0x100>,
+ <0x0ae94500 0x300>,
+ <0x0ae94800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+ };
+...