@@ -577,6 +577,45 @@ smp2p_cdsp_in: slave-kernel {
};
};
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <435>, <428>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ smp2p_modem_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_modem_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* TODO: smem mailbox in and out */
+ };
+
soc: soc@0 {
compatible = "simple-bus";
@@ -3440,6 +3479,59 @@ compute-cb@14 {
};
};
};
+
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sm8750-mpss-pas";
+ reg = <0x0 0x04080000 0x0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MSS>;
+ power-domain-names = "cx",
+ "mss";
+
+ memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+ <&dsm_partition_1_mem>,
+ <&dsm_partition_2_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_modem_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ qcom,remote-pid = <1>;
+
+ label = "mpss";
+ };
+ };
};
timer {
Add nodes for the MPSS and its SMP2P. These are compatible with earlier SM8650 with difference in lack of fifth memory region for Qlink Logging. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/sm8750.dtsi | 92 ++++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+)