From patchwork Wed Nov 27 11:51:06 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Janaki Ramaiah Thota X-Patchwork-Id: 13886922 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1A30A1917F1; Wed, 27 Nov 2024 11:51:41 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732708303; cv=none; b=NOtQvqchG+eo03T/iXY7GfATST1Eq1IHI2R53ocpDSFMLY+fxkSEpsSHpg4uugdm3PLgpOpWzUGjjxFBcdww3B8uB4oeJKmBdI/dji0MrInTyrGvsRBojEgLZQ2wj6Cj8xqRjWjrM4ZO2kFmCUufSqI+LYOJnNcKLSBVhiWIpkI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732708303; c=relaxed/simple; bh=XNcjXJ2Ie3hLm11kDF+lzwds13RJcEg/X9oUNaxCuA4=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=gDxKd1jZp3zgLnXWWA6pAAELQeJGsHuFGV5iJDOaGq4ifwKyVRSAAhUi2qPukWG0d+lZ/vAVg2+YNvL0/6BZJnobRZiA7sJ8U7vJ7A//QeuBiqA2Oj/AwPZ6Wh4/LkPAjUTNW9aaKgQJg4/xxNZJWCCfwcxxwER6MEIujTSwjVk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=nCaST0KG; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="nCaST0KG" Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4ARAg0EL017247; Wed, 27 Nov 2024 11:51:34 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-type:date:from:in-reply-to:message-id:mime-version :references:subject:to; s=qcppdkim1; bh=Y225L4jROYRtJ/8StcLSyEnT M0rYsgkVn5k3JdinNow=; b=nCaST0KGZaw4mQWfJ4B6Qo/82OHlO1HxIt05DzPQ 2e25YBEXsloSs38bI6o7iofL3Av3GaMYTOWQgsD3Y/ZZIc6F4uIjDmg6oiI0C6d9 iTtJ0W4YJzAkI7RHlwHDIhzpLnuZilA1do1GSaqkpxn1+atbtWhQQ1C8qu0Izte7 ygzK592mp1f7TpDFr9WzyxxorsYuhU/Ncat/Eo8lzXvB1vgIIKIqD6zjxa2t5zZU ppLErw28FC8IQ5/Z8paHHAoPhZWcGhHJSj1FG9qwg2AFt1W5EJ9Q7fM5V03viJ1c OOgmlDtzO5q8slBX0AcRJzERs+PkEwIxLrS9HRon21z8TA== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 4361wcg7a6-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 27 Nov 2024 11:51:34 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 4ARBpX2n016589 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 27 Nov 2024 11:51:33 GMT Received: from hu-janathot-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Wed, 27 Nov 2024 03:51:27 -0800 From: Janaki Ramaiah Thota To: Liam Girdwood , Mark Brown , "Rob Herring" , Krzysztof Kozlowski , "Conor Dooley" , Bjorn Andersson , "Konrad Dybcio" , Marcel Holtmann , "Luiz Augusto von Dentz" , Bartosz Golaszewski CC: , , , Bartosz Golaszewski , , , , , Subject: [PATCH v4 1/2] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth Date: Wed, 27 Nov 2024 17:21:06 +0530 Message-ID: <20241127115107.11549-2-quic_janathot@quicinc.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20241127115107.11549-1-quic_janathot@quicinc.com> References: <20241127115107.11549-1-quic_janathot@quicinc.com> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 57l9K9AT0lbqxZU56J0-rbRHxXXduAbj X-Proofpoint-ORIG-GUID: 57l9K9AT0lbqxZU56J0-rbRHxXXduAbj X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 bulkscore=0 mlxlogscore=999 malwarescore=0 priorityscore=1501 clxscore=1011 mlxscore=0 phishscore=0 lowpriorityscore=0 spamscore=0 impostorscore=0 adultscore=0 suspectscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2411270097 Add a PMU node for the WCN6750 module present on the qcs6490-rb3gen board and use the power sequencer for the same. Signed-off-by: Janaki Ramaiah Thota --- arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 174 ++++++++++++++++++- drivers/bluetooth/hci_qca.c | 2 +- drivers/power/sequencing/pwrseq-qcom-wcn.c | 22 +++ 3 files changed, 196 insertions(+), 2 deletions(-) -- diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index 27695bd54220..6807bf347241 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved. */ /dts-v1/; @@ -32,7 +32,9 @@ chassis-type = "embedded"; aliases { + bluetooth0 = &bluetooth; serial0 = &uart5; + serial1 = &uart7; }; chosen { @@ -217,6 +219,64 @@ regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; }; + + wcn6750-pmu { + compatible = "qcom,wcn6750-pmu"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en>, <&sw_ctrl>; + vddaon-supply = <&vreg_s7b_0p972>; + vddasd-supply = <&vreg_l11c_2p8>; + vddpmu-supply = <&vreg_s7b_0p972>; + vddrfa0p8-supply = <&vreg_s7b_0p972>; + vddrfa1p2-supply = <&vreg_s8b_1p272>; + vddrfa1p7-supply = <&vreg_s1b_1p872>; + vddrfa2p2-supply = <&vreg_s1c_2p19>; + + bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -758,6 +818,39 @@ status = "okay"; }; +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + &qupv3_id_0 { status = "okay"; }; @@ -801,12 +894,91 @@ &tlmm { gpio-reserved-ranges = <32 2>, /* ADSP */ <48 4>; /* NFC */ + bt_en: bt-en-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + sw_ctrl: sw-ctrl-state { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; + }; }; &uart5 { status = "okay"; }; +&uart7 { + status = "okay"; + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, + <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + max-speed = <3200000>; + }; +}; + &usb_1 { status = "okay"; }; diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index 37129e6cb0eb..fbf8840fa534 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -2346,6 +2346,7 @@ static int qca_serdev_probe(struct serdev_device *serdev) switch (qcadev->btsoc_type) { case QCA_WCN6855: case QCA_WCN7850: + case QCA_WCN6750: if (!device_property_present(&serdev->dev, "enable-gpios")) { /* * Backward compatibility with old DT sources. If the @@ -2365,7 +2366,6 @@ static int qca_serdev_probe(struct serdev_device *serdev) case QCA_WCN3990: case QCA_WCN3991: case QCA_WCN3998: - case QCA_WCN6750: qcadev->bt_power->dev = &serdev->dev; err = qca_init_regulators(qcadev->bt_power, data->vregs, data->num_vregs); diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c index 682a9beac69e..e38da79f0ada 100644 --- a/drivers/power/sequencing/pwrseq-qcom-wcn.c +++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c @@ -293,6 +293,24 @@ static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn6855_of_data = { .targets = pwrseq_qcom_wcn6855_targets, }; +static const char *const pwrseq_wcn6750_vregs[] = { + "vddaon", + "vddasd", + "vddpmu", + "vddrfa0p8", + "vddrfa1p2", + "vddrfa1p7", + "vddrfa2p2", +}; + +static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn6750_of_data = { + .vregs = pwrseq_wcn6750_vregs, + .num_vregs = ARRAY_SIZE(pwrseq_wcn6750_vregs), + .pwup_delay_ms = 50, + .gpio_enable_delay_ms = 5, + .targets = pwrseq_qcom_wcn_targets, +}; + static const char *const pwrseq_wcn7850_vregs[] = { "vdd", "vddio", @@ -431,6 +449,10 @@ static const struct of_device_id pwrseq_qcom_wcn_of_match[] = { .compatible = "qcom,wcn7850-pmu", .data = &pwrseq_wcn7850_of_data, }, + { + .compatible = "qcom,wcn6750-pmu", + .data = &pwrseq_wcn6750_of_data, + }, { } }; MODULE_DEVICE_TABLE(of, pwrseq_qcom_wcn_of_match);