diff mbox series

[v3,5/7] arm64: dts: qcom: sm8750: Add pmic dtsi

Message ID 20241204-sm8750_master_dt-v3-5-4d5a8269950b@quicinc.com (mailing list archive)
State New
Headers show
Series dts: qcom: Introduce SM8750 device trees | expand

Commit Message

Melody Olvera Dec. 4, 2024, 11:18 p.m. UTC 
Add pmic dtsi file for SM8750 SoC describing the pmics and
their thermal zones.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi | 188 +++++++++++++++++++++++++++++
 1 file changed, 188 insertions(+)

Comments

Konrad Dybcio Dec. 5, 2024, 4:14 p.m. UTC | #1 
On 5.12.2024 12:18 AM, Melody Olvera wrote:
> Add pmic dtsi file for SM8750 SoC describing the pmics and
> their thermal zones.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi b/arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..6eb8d78937c3f2907a352616ec3170a3c0973e5d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi
@@ -0,0 +1,188 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/ {
+	thermal-zones {
+		pm8550ve-d-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_d_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-f-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_f_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-g-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_g_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550vs-j-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550vs_j_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	/* PM8550VE */
+	pm8550ve_d: pmic@3 {
+		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_d_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_d_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_d_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550ve_f: pmic@5 {
+		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_f_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_f_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_f_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550ve_g: pmic@6 {
+		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_g_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_g_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_g_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PM8550VS */
+	pm8550vs_j: pmic@9 {
+		compatible = "qcom,pm8550vs", "qcom,spmi-pmic";
+		reg = <0x9 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_j_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_j_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_j_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};