@@ -186,6 +186,46 @@ rng: rng@e3000 {
clock-names = "core";
};
+ pcie0_phy: phy@4b0000{
+ compatible = "qcom,ipq5332-uniphy-pcie-gen3x1";
+ reg = <0x004b0000 0x800>;
+
+ clocks = <&gcc GCC_PCIE3X1_0_PIPE_CLK>,
+ <&gcc GCC_PCIE3X1_PHY_AHB_CLK>;
+
+ resets = <&gcc GCC_PCIE3X1_0_PHY_BCR>,
+ <&gcc GCC_PCIE3X1_PHY_AHB_CLK_ARES>,
+ <&gcc GCC_PCIE3X1_0_PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_ahb",
+ "phy_cfg";
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie0_pipe_clk_src";
+
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@4b1000 {
+ compatible = "qcom,ipq5332-uniphy-pcie-gen3x2";
+ reg = <0x004b1000 0x1000>;
+
+ clocks = <&gcc GCC_PCIE3X2_PIPE_CLK>,
+ <&gcc GCC_PCIE3X2_PHY_AHB_CLK>;
+
+ resets = <&gcc GCC_PCIE3X2_PHY_BCR>,
+ <&gcc GCC_PCIE3X2_PHY_AHB_CLK_ARES>;
+ reset-names = "phy",
+ "phy_ahb";
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie1_pipe_clk_src";
+
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5332-tlmm";
reg = <0x01000000 0x300000>;
@@ -212,8 +252,8 @@ gcc: clock-controller@1800000 {
#interconnect-cells = <1>;
clocks = <&xo_board>,
<&sleep_clk>,
- <0>,
- <0>,
+ <&pcie1_phy>,
+ <&pcie0_phy>,
<0>;
};
@@ -364,6 +404,176 @@ usb_dwc: usb@8a00000 {
};
};
+ pcie0: pcie@20000000 {
+ compatible = "qcom,pcie-ipq5332";
+ reg = <0x20000000 0xf1d>,
+ <0x20000F20 0xa8>,
+ <0x20001000 0x1000>,
+ <0x00080000 0x3000>,
+ <0x20100000 0x1000>;
+ reg-names = "dbi", "elbi", "atu", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0 0x20200000 0x20200000 0 0x00100000>, /* I/O */
+ <0x02000000 0 0x20300000 0x20300000 0 0x0fd00000>; /* MEM */
+
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 38 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE3X1_0_AXI_M_CLK>,
+ <&gcc GCC_PCIE3X1_0_AXI_S_CLK>,
+ <&gcc GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK>,
+ <&gcc GCC_PCIE3X1_0_RCHG_CLK>,
+ <&gcc GCC_PCIE3X1_0_AHB_CLK>,
+ <&gcc GCC_PCIE3X1_0_AUX_CLK>;
+
+ clock-names = "axi_m",
+ "axi_s",
+ "axi_bridge",
+ "rchng",
+ "ahb",
+ "aux";
+
+ resets = <&gcc GCC_PCIE3X1_0_PIPE_ARES>,
+ <&gcc GCC_PCIE3X1_0_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE3X1_0_AXI_S_STICKY_ARES>,
+ <&gcc GCC_PCIE3X1_0_AXI_S_CLK_ARES>,
+ <&gcc GCC_PCIE3X1_0_AXI_M_STICKY_ARES>,
+ <&gcc GCC_PCIE3X1_0_AXI_M_CLK_ARES>,
+ <&gcc GCC_PCIE3X1_0_AUX_CLK_ARES>,
+ <&gcc GCC_PCIE3X1_0_AHB_CLK_ARES>;
+
+ reset-names = "pipe",
+ "sticky",
+ "axi_s_sticky",
+ "axi_s",
+ "axi_m_sticky",
+ "axi_m",
+ "aux",
+ "ahb";
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ interconnects = <&gcc MASTER_SNOC_PCIE3_1_M &gcc SLAVE_SNOC_PCIE3_1_M>,
+ <&gcc MASTER_ANOC_PCIE3_1_S &gcc SLAVE_ANOC_PCIE3_1_S>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ msi-map = <0x0 &v2m0 0x0 0xffd>;
+ status = "disabled";
+ };
+
+ pcie1: pcie@18000000 {
+ compatible = "qcom,pcie-ipq5332";
+ reg = <0x18000000 0xf1d>,
+ <0x18000F20 0xa8>,
+ <0x18001000 0x1000>,
+ <0x00088000 0x3000>,
+ <0x18100000 0x1000>;
+ reg-names = "dbi", "elbi", "atu", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0 0x18200000 0x18200000 0 0x00100000>, /* I/O */
+ <0x02000000 0 0x18300000 0x18300000 0 0x07d00000>; /* MEM */
+
+ interrupts = <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 412 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 413 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 414 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 415 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE3X2_AXI_M_CLK>,
+ <&gcc GCC_PCIE3X2_AXI_S_CLK>,
+ <&gcc GCC_PCIE3X2_AXI_S_BRIDGE_CLK>,
+ <&gcc GCC_PCIE3X2_RCHG_CLK>,
+ <&gcc GCC_PCIE3X2_AHB_CLK>,
+ <&gcc GCC_PCIE3X2_AUX_CLK>;
+
+ clock-names = "axi_m",
+ "axi_s",
+ "axi_bridge",
+ "rchng",
+ "ahb",
+ "aux";
+
+ resets = <&gcc GCC_PCIE3X2_PIPE_ARES>,
+ <&gcc GCC_PCIE3X2_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE3X2_AXI_S_STICKY_ARES>,
+ <&gcc GCC_PCIE3X2_AXI_S_CLK_ARES>,
+ <&gcc GCC_PCIE3X2_AXI_M_STICKY_ARES>,
+ <&gcc GCC_PCIE3X2_AXI_M_CLK_ARES>,
+ <&gcc GCC_PCIE3X2_AUX_CLK_ARES>,
+ <&gcc GCC_PCIE3X2_AHB_CLK_ARES>;
+
+ reset-names = "pipe",
+ "sticky",
+ "axi_s_sticky",
+ "axi_s",
+ "axi_m_sticky",
+ "axi_m",
+ "aux",
+ "ahb";
+
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+
+ interconnects = <&gcc MASTER_SNOC_PCIE3_2_M &gcc SLAVE_SNOC_PCIE3_2_M>,
+ <&gcc MASTER_ANOC_PCIE3_2_S &gcc SLAVE_ANOC_PCIE3_2_S>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ msi-map = <0x0 &v2m0 0x0 0xffd>;
+ status = "disabled";
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */