[v1,1/2] bus: mhi: host: pci_generic: Add supoprt for SA8775P target

Commit Message

Mrinmay Sarkar Dec. 5, 2024, 6:54 a.m. UTC

Add generic info for SA8775P target. SA8775P supports IP_SW
usecase only. Hence use separate configuration to enable IP_SW
channel.

Signed-off-by: Mrinmay Sarkar <[e-mail]>
---
 drivers/bus/mhi/host/pci_generic.c | 34 ++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Patch

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 56ba4192c89c..b62a05e854e9 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -245,6 +245,19 @@  struct mhi_pci_dev_info {
 		.channel = ch_num,		\
 	}
 
+static const struct mhi_channel_config modem_qcom_v2_mhi_channels[] = {
+	MHI_CHANNEL_CONFIG_UL(46, "IP_SW0", 2048, 1),
+	MHI_CHANNEL_CONFIG_DL(47, "IP_SW0", 2048, 2),
+};
+
+static struct mhi_event_config modem_qcom_v2_mhi_events[] = {
+	/* first ring is control+data ring */
+	MHI_EVENT_CONFIG_CTRL(0, 64),
+	/* Software channels dedicated event ring */
+	MHI_EVENT_CONFIG_SW_DATA(1, 64),
+	MHI_EVENT_CONFIG_SW_DATA(2, 64),
+};
+
 static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
 	MHI_CHANNEL_CONFIG_UL(4, "DIAG", 16, 1),
 	MHI_CHANNEL_CONFIG_DL(5, "DIAG", 16, 1),
@@ -275,6 +288,15 @@  static struct mhi_event_config modem_qcom_v1_mhi_events[] = {
 	MHI_EVENT_CONFIG_HW_DATA(5, 2048, 101)
 };
 
+static const struct mhi_controller_config modem_qcom_v3_mhiv_config = {
+	.max_channels = 128,
+	.timeout_ms = 8000,
+	.num_channels = ARRAY_SIZE(modem_qcom_v2_mhi_channels),
+	.ch_cfg = modem_qcom_v2_mhi_channels,
+	.num_events = ARRAY_SIZE(modem_qcom_v2_mhi_events),
+	.event_cfg = modem_qcom_v2_mhi_events,
+};
+
 static const struct mhi_controller_config modem_qcom_v2_mhiv_config = {
 	.max_channels = 128,
 	.timeout_ms = 8000,
@@ -294,6 +316,16 @@  static const struct mhi_controller_config modem_qcom_v1_mhiv_config = {
 	.event_cfg = modem_qcom_v1_mhi_events,
 };
 
+static const struct mhi_pci_dev_info mhi_qcom_sa8775p_info = {
+	.name = "qcom-sa8775p",
+	.edl_trigger = false,
+	.config = &modem_qcom_v3_mhiv_config,
+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+	.dma_data_width = 32,
+	.mru_default = 32768,
+	.sideband_wake = false,
+};
+
 static const struct mhi_pci_dev_info mhi_qcom_sdx75_info = {
 	.name = "qcom-sdx75m",
 	.fw = "qcom/sdx75m/xbl.elf",
@@ -720,6 +752,8 @@  static const struct mhi_pci_dev_info mhi_netprisma_fcun69_info = {
 
 /* Keep the list sorted based on the PID. New VID should be added as the last entry */
 static const struct pci_device_id mhi_pci_id_table[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0116),
+		.driver_data = (kernel_ulong_t) &mhi_qcom_sa8775p_info },
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, PCI_VENDOR_ID_QCOM, 0x010c),