diff mbox series

[v2,2/2] Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports"

Message ID 20241209111905.31017-3-johan+linaro@kernel.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: x1e80100: fix USB OTG regressions | expand

Commit Message

Johan Hovold Dec. 9, 2024, 11:19 a.m. UTC 
This reverts commit 2dd3250191bcfe93b0c9da46624af830310400a7.

A recent change enabling OTG mode on the x1e81000 CRD breaks suspend.
Specifically, the device hard resets during resume if suspended with all
controllers in device mode (i.e. no USB device connected).

The corresponding change on the T14s also led to SuperSpeed hotplugs not
being detected.

With retimer (and orientation detection) support not even merged yet,
let's revert at least until we have stable host mode in mainline.

Fixes: 2dd3250191bc ("arm64: dts: qcom: x1e80100-crd: enable otg on usb ports")
Reported-by: Abel Vesa <abel.vesa@linaro.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 199f6b42aa11..66360390ae7d 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -1840,6 +1840,10 @@  &usb_1_ss0 {
 	status = "okay";
 };
 
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_1_ss0_dwc3_hs {
 	remote-endpoint = <&pmic_glink_ss0_hs_in>;
 };
@@ -1868,6 +1872,10 @@  &usb_1_ss1 {
 	status = "okay";
 };
 
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_1_ss1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_ss1_hs_in>;
 };
@@ -1896,6 +1904,10 @@  &usb_1_ss2 {
 	status = "okay";
 };
 
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_1_ss2_dwc3_hs {
 	remote-endpoint = <&pmic_glink_ss2_hs_in>;
 };