@@ -245,6 +245,58 @@ struct mhi_pci_dev_info {
.channel = ch_num, \
}
+static const struct mhi_channel_config mhi_qcom_qdu100_channels[] = {
+ MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 2),
+ MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 2),
+ MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 128, 1),
+ MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 128, 1),
+ MHI_CHANNEL_CONFIG_UL(4, "DIAG", 64, 3),
+ MHI_CHANNEL_CONFIG_DL(5, "DIAG", 64, 3),
+ MHI_CHANNEL_CONFIG_UL(9, "QDSS", 64, 3),
+ MHI_CHANNEL_CONFIG_UL(14, "NMEA", 32, 4),
+ MHI_CHANNEL_CONFIG_DL(15, "NMEA", 32, 4),
+ MHI_CHANNEL_CONFIG_UL(16, "CSM_CTRL", 32, 4),
+ MHI_CHANNEL_CONFIG_DL(17, "CSM_CTRL", 32, 4),
+ MHI_CHANNEL_CONFIG_UL(40, "MHI_PHC", 32, 4),
+ MHI_CHANNEL_CONFIG_DL(41, "MHI_PHC", 32, 4),
+ MHI_CHANNEL_CONFIG_UL(46, "IP_SW0", 256, 5),
+ MHI_CHANNEL_CONFIG_DL(47, "IP_SW0", 256, 5),
+};
+
+static struct mhi_event_config mhi_qcom_qdu100_events[] = {
+ /* first ring is control+data ring */
+ MHI_EVENT_CONFIG_CTRL(0, 64),
+ /* SAHARA dedicated event ring */
+ MHI_EVENT_CONFIG_SW_DATA(1, 256),
+ /* Software channels dedicated event ring */
+ MHI_EVENT_CONFIG_SW_DATA(2, 64),
+ MHI_EVENT_CONFIG_SW_DATA(3, 256),
+ MHI_EVENT_CONFIG_SW_DATA(4, 256),
+ /* Software IP channels dedicated event ring */
+ MHI_EVENT_CONFIG_SW_DATA(5, 512),
+ MHI_EVENT_CONFIG_SW_DATA(6, 512),
+ MHI_EVENT_CONFIG_SW_DATA(7, 512),
+};
+
+static const struct mhi_controller_config mhi_qcom_qdu100_config = {
+ .max_channels = 128,
+ .timeout_ms = 120000,
+ .num_channels = ARRAY_SIZE(mhi_qcom_qdu100_channels),
+ .ch_cfg = mhi_qcom_qdu100_channels,
+ .num_events = ARRAY_SIZE(mhi_qcom_qdu100_events),
+ .event_cfg = mhi_qcom_qdu100_events,
+};
+
+static const struct mhi_pci_dev_info mhi_qcom_qdu100_info = {
+ .name = "qcom-qdu100",
+ .fw = "qcom/qdu100/xbl_s.melf",
+ .edl_trigger = true,
+ .config = &mhi_qcom_qdu100_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .sideband_wake = false,
+};
+
static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 16, 1),
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 16, 1),
@@ -742,6 +794,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0309),
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx75_info },
+ /* QDU100, x100-DU */
+ { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0601),
+ .driver_data = (kernel_ulong_t) &mhi_qcom_qdu100_info },
{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */
.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */
Add MHI controller configuration for QDU100 device. The Qualcomm X100 5G RAN Accelerator card is designed to enhance Open vRAN servers by offloading CPUs from intensive 5G baseband functions. Link: https://docs.qualcomm.com/bundle/publicresource/87-79371-1_REV_A_Qualcomm_X100_5G_RAN_Accelerator_Card_Product_Brief.pdf Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com> --- changes from V4: - Updated QDU100 VID as per order in mhi_pci_id_table. - Link to v4: https://lore.kernel.org/r/20241209-qdu100_us-v4-1-f9010b2a09a2@quicinc.com changes from V3: - Removed IP_SW1 and IP_SW2 support currently, will add once SW_IP1/2 channels support are added to mhi-net driver. - Removed qdu100 edl images, as EDL images are not needed. - Added space inbetween kernel_ulong_t and mhi_qcom_qdu100_info. - QDU100 XBL FW images were pushed to linux-firmware git repo https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qcom/qdu100 changes from V2: - updated commit text. changes from V1: - Changing naming convention from modem_qcom_qdu100* to mhi_qcom_qdu100*. - Updated commit text. - Fixed and corrected by passing mhi_pci_dev_info struct instead of mhi_controller_config. --- --- drivers/bus/mhi/host/pci_generic.c | 55 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) --- base-commit: 28955f4fa2823e39f1ecfb3a37a364563527afbc change-id: 20241127-qdu100_us-abd7d1613c8b Best regards,