diff mbox series

[5/5] arm64: dts: qcom: sm8750: Add UFS nodes for SM8750 QRD and MTP boards

Message ID 20250113-sm8750_ufs_master-v1-5-b3774120eb8c@quicinc.com (mailing list archive)
State New
Headers show
Series Add UFS support for SM8750 | expand

Commit Message

Melody Olvera Jan. 13, 2025, 9:46 p.m. UTC 
From: Nitin Rawat <quic_nitirawa@quicinc.com>

Add UFS host controller and PHY nodes for SM8750 QRD and MTP boards.

Co-developed-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 18 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8750-qrd.dts | 18 ++++++++++++++++++
 2 files changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 9e3aacad7bdab6848e86f8e45e04907e1c752a07..9d34159e73948e7f3f939593d1ace444cc5dcd15 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -792,3 +792,21 @@  &tlmm {
 &uart7 {
 	status = "okay";
 };
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1j_0p91>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1d_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
index f77efab0aef9bab751a947173bcdcc27df7295a8..8dd82494ba5aea6e6b5ddafc9299ec68dfb84bcd 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
@@ -790,3 +790,21 @@  &tlmm {
 &uart7 {
 	status = "okay";
 };
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1j_0p91>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1d_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};