diff mbox series

[04/10] arm64: dts: qcom: sm8550: add QUP serial engines OPP tables

Message ID 20250115-topic-sm8x50-upstream-dt-icc-update-v1-4-eaa8b10e2af7@linaro.org (mailing list archive)
State New
Headers show
Series arm64: dts: qcom: sm8[56]50: performance related changes | expand

Commit Message

Neil Armstrong Jan. 15, 2025, 1:43 p.m. UTC
The QUP Serial Engines requires different power domain level
depending on their working frequency, add the required OPP
table with the level associated with all possible frequencies.

For the "I2C Hub" serial engines, sinse they only support a
single Operating Point, only add a single power domain level
property.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 122 +++++++++++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 4b3c51fad9f19a1ec1e5d563a18fec9633a4e4ae..d02d80d731b9a8746655af6da236307760a8f662 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -348,6 +348,48 @@  mc_virt: interconnect-1 {
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_125mhz: opp-table-qup125mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
 	memory@a0000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -861,6 +903,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -882,6 +926,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -907,6 +953,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -928,6 +976,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -953,6 +1003,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -974,6 +1026,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -999,6 +1053,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1020,6 +1076,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1045,6 +1103,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1066,6 +1126,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1091,6 +1153,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1112,6 +1176,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1130,6 +1196,8 @@  &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_125mhz>;
 				status = "disabled";
 			};
 
@@ -1153,6 +1221,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1174,6 +1244,8 @@  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1206,6 +1278,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1225,6 +1299,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1244,6 +1320,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1263,6 +1341,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1282,6 +1362,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1301,6 +1383,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1320,6 +1404,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1339,6 +1425,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1358,6 +1446,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1377,6 +1467,8 @@  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 		};
@@ -1440,6 +1532,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1461,6 +1555,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1486,6 +1582,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1507,6 +1605,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1532,6 +1632,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1553,6 +1655,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1578,6 +1682,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1599,6 +1705,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1624,6 +1732,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1645,6 +1755,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1668,6 +1780,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1691,6 +1805,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1714,6 +1830,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1737,6 +1855,8 @@  &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1755,6 +1875,8 @@  uart7: serial@a9c000 {
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 		};