@@ -7,6 +7,8 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "ipq5424.dtsi"
/ {
@@ -17,6 +19,33 @@ aliases {
serial0 = &uart1;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
+
vreg_misc_3p3: regulator-usb-3p3 {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
@@ -95,6 +124,20 @@ &ssphy_0 {
};
&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio19";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio42";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
spi0_default_state: spi0-default-state {
clk-pins {
pins = "gpio6";
Add support for wlan-2g LED on GPIO 42 and wps buttons on GPIO 19. Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> --- arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 43 +++++++++++++++++++++ 1 file changed, 43 insertions(+)