| Message ID | 20250212-sdm845_dp-v2-2-4954e51458f4@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | drm/msm/dp: Fix Type-C Timing | expand |
On Wed, Feb 12, 2025 at 03:03:47PM -0800, James A. MacInnes wrote: > Type-C DisplayPort inoperable due to incorrect porch settings. > - Re-used wide_bus_en as flag to prevent porch shifting Unfortunately I don't know enough details to comment on this change. Maybe Abhinav can check it. I can only notice that msm-4.14 disables programmable_fetch_config for non-DSI calls. Would disabling that call for DP interface fix your issue? > > Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") > Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 14 +++++++++----- > 1 file changed, 9 insertions(+), 5 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c > index abd6600046cb..a21addc4794f 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c > @@ -94,17 +94,21 @@ static void drm_mode_to_intf_timing_params( > timing->vsync_polarity = 0; > } > > - /* for DP/EDP, Shift timings to align it to bottom right */ > - if (phys_enc->hw_intf->cap->type == INTF_DP) { > + timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent); > + timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent); > + > + /* > + * For DP/EDP, Shift timings to align it to bottom right. > + * wide_bus_en is set for everything excluding SDM845 & > + * porch changes cause DisplayPort failure and HDMI tearing. > + */ > + if (phys_enc->hw_intf->cap->type == INTF_DP && timing->wide_bus_en) { > timing->h_back_porch += timing->h_front_porch; > timing->h_front_porch = 0; > timing->v_back_porch += timing->v_front_porch; > timing->v_front_porch = 0; > } > > - timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent); > - timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent); > - > /* > * for DP, divide the horizonal parameters by 2 when > * widebus is enabled > > -- > 2.43.0 >
On 2/12/2025 4:04 PM, Dmitry Baryshkov wrote: > On Wed, Feb 12, 2025 at 03:03:47PM -0800, James A. MacInnes wrote: >> Type-C DisplayPort inoperable due to incorrect porch settings. >> - Re-used wide_bus_en as flag to prevent porch shifting > > Unfortunately I don't know enough details to comment on this change. > Maybe Abhinav can check it. I can only notice that msm-4.14 disables > programmable_fetch_config for non-DSI calls. Would disabling that call > for DP interface fix your issue? > Yes, this piece of timing adjustment matches what we have even without widebus. I do agree about the programmable fetch that it is enabled only on DSI even on the latest kernels. 698 if (phys_enc->hw_intf->cap->type == INTF_DSI) 699 programmable_fetch_config(phys_enc, &timing_params); We can try if that works. >> >> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") >> Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 14 +++++++++----- >> 1 file changed, 9 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c >> index abd6600046cb..a21addc4794f 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c >> @@ -94,17 +94,21 @@ static void drm_mode_to_intf_timing_params( >> timing->vsync_polarity = 0; >> } >> >> - /* for DP/EDP, Shift timings to align it to bottom right */ >> - if (phys_enc->hw_intf->cap->type == INTF_DP) { >> + timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent); >> + timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent); >> + >> + /* >> + * For DP/EDP, Shift timings to align it to bottom right. >> + * wide_bus_en is set for everything excluding SDM845 & >> + * porch changes cause DisplayPort failure and HDMI tearing. >> + */ >> + if (phys_enc->hw_intf->cap->type == INTF_DP && timing->wide_bus_en) { >> timing->h_back_porch += timing->h_front_porch; >> timing->h_front_porch = 0; >> timing->v_back_porch += timing->v_front_porch; >> timing->v_front_porch = 0; >> } >> >> - timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent); >> - timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent); >> - >> /* >> * for DP, divide the horizonal parameters by 2 when >> * widebus is enabled >> >> -- >> 2.43.0 >> >
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c index abd6600046cb..a21addc4794f 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c @@ -94,17 +94,21 @@ static void drm_mode_to_intf_timing_params( timing->vsync_polarity = 0; } - /* for DP/EDP, Shift timings to align it to bottom right */ - if (phys_enc->hw_intf->cap->type == INTF_DP) { + timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent); + timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent); + + /* + * For DP/EDP, Shift timings to align it to bottom right. + * wide_bus_en is set for everything excluding SDM845 & + * porch changes cause DisplayPort failure and HDMI tearing. + */ + if (phys_enc->hw_intf->cap->type == INTF_DP && timing->wide_bus_en) { timing->h_back_porch += timing->h_front_porch; timing->h_front_porch = 0; timing->v_back_porch += timing->v_front_porch; timing->v_front_porch = 0; } - timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent); - timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent); - /* * for DP, divide the horizonal parameters by 2 when * widebus is enabled
Type-C DisplayPort inoperable due to incorrect porch settings. - Re-used wide_bus_en as flag to prevent porch shifting Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)