Message ID | 20250221-sar2130p-pci-v2-2-cc87590ffbeb@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | PCI: qcom-ep: add support for using the EP on SAR2130P and SM8450 | expand |
On 21/02/2025 04:06, Dmitry Baryshkov wrote: > Qualcomm SM8450 platform can (and should) be using DMA for the PCIe EP > transfers. Extend the MMIO regions and interrupts in order to acommodate > for the DMA resources. Upstream DT doesn't provide support for the EP > mode of the PCIe controller, so while this is an ABI break, it doesn't > break any of the supported platforms. > > Fixes: 63e445b746aa ("dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC") > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > index 800accdf5947e7178ad80f0759cf53111be1a814..460191fc4ff1b64206bce89e15ce38e59c112ba6 100644 > --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > @@ -173,9 +173,9 @@ allOf: > then: > properties: > reg: > - maxItems: 6 You need minItems here and in all other places (also interrupts). Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml index 800accdf5947e7178ad80f0759cf53111be1a814..460191fc4ff1b64206bce89e15ce38e59c112ba6 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -173,9 +173,9 @@ allOf: then: properties: reg: - maxItems: 6 + maxItems: 7 reg-names: - maxItems: 6 + maxItems: 7 clocks: items: - description: PCIe Auxiliary clock @@ -197,9 +197,9 @@ allOf: - const: ddrss_sf_tbu - const: aggre_noc_axi interrupts: - maxItems: 2 + maxItems: 3 interrupt-names: - maxItems: 2 + maxItems: 3 - if: properties: