diff mbox series

[v10,5/6] arm64: dts: qcom: ipq9574: Add nsscc node

Message ID 20250221101426.776377-6-quic_mmanikan@quicinc.com (mailing list archive)
State New
Headers show
Series Add NSS clock controller support for IPQ9574 | expand

Commit Message

Manikanta Mylavarapu Feb. 21, 2025, 10:14 a.m. UTC 
From: Devi Priya <quic_devipriy@quicinc.com>

Add a node for the nss clock controller found on ipq9574 based devices.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
---
Changes in V10:
	- Added clock-names.
	- Dropped #power-domain-cells from nsscc node, because nsscc
	  doesn't provide any power domains.

 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 29 +++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 942290028972..bbb5bd7f8618 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -1193,6 +1193,35 @@  pcie0: pci@28000000 {
 			status = "disabled";
 		};
 
+		nsscc: clock-controller@39b00000 {
+			compatible = "qcom,ipq9574-nsscc";
+			reg = <0x39b00000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&cmn_pll NSS_1200MHZ_CLK>,
+				 <&cmn_pll PPE_353MHZ_CLK>,
+				 <&gcc GPLL0_OUT_AUX>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_NSSCC_CLK>;
+			clock-names = "xo",
+				      "nss_1200",
+				      "ppe_353",
+				      "gpll0_out",
+				      "uniphy0_rx",
+				      "uniphy0_tx",
+				      "uniphy1_rx",
+				      "uniphy1_tx",
+				      "uniphy2_rx",
+				      "uniphy2_tx",
+				      "nsscc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#interconnect-cells = <1>;
+		};
 	};
 
 	thermal-zones {