[2/4] dt-bindings: display: panel: Add Himax HX83112B

Commit Message

Luca Weiss Feb. 22, 2025, 5:58 p.m. UTC

Himax HX83112B is a display driver IC used to drive LCD DSI panels.
Describe it and the Fairphone 3 panel from DJN using it.

Signed-off-by: Luca Weiss <[e-mail]>
---
 .../bindings/display/panel/himax,hx83112b.yaml     | 75 ++++++++++++++++++++++
 1 file changed, 75 insertions(+)

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83112b.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83112b.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..e6bd4b33d40be98e479d84617aea6d2af0df70e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx83112b.yaml
@@ -0,0 +1,75 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112B-based DSI display panels
+
+maintainers:
+  - Luca Weiss <[e-mail]>
+
+description:
+  The Himax HX83112B is a generic DSI Panel IC used to control
+  LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: djn,fairphone-fp3-panel
+
+  reg:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O voltage rail
+
+  vsn-supply:
+    description: Positive source voltage rail
+
+  vsp-supply:
+    description: Negative source voltage rail
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - iovcc-supply
+  - vsn-supply
+  - vsp-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "djn,fairphone-fp3-panel";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+            iovcc-supply = <&pm8953_l6>;
+            vsn-supply = <&pmi632_lcdb_ncp>;
+            vsp-supply = <&pmi632_lcdb_ldo>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...