From patchwork Thu Mar 6 11:16:09 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manikanta Mylavarapu X-Patchwork-Id: 14004250 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5AFBF2063C7; Thu, 6 Mar 2025 11:16:39 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1741259801; cv=none; b=kAxdrlsVw8OVwCrflvPgVUzfUoV2fMb7PeWyubmBBqYaeuGqgSvkUc1vMINh6l+Iz9Fyc/H8Nku0L6J9cw08TPACGnSgkbvL3pmdTnzsJT3zYehiHM4ddanbnEeXRBvbcq5Zc7VZX6/TXsN8mmFUQ8t9vJudx+cgeSDPVxJHMo8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1741259801; c=relaxed/simple; bh=LQRcsN87COSt9tNwk1gyRQbbX8vE/IFNpfjt89dMhGM=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=ItaU+94eQUIV5x9LL+evTwab3kUohMz+Em3ZXUXn66EhlX2HO3DCYghZlTuWHpFDDUqqWCXp1o4W0eom61kxHcE7Rj5+LdWVwANWvkJhxSy457nBUGOe/Tw0/FDUvo/GHP/1QuRz+HH0sZCj0b3vyJLnVwP8uhRT7hblLe2mYJI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=WVxVjoN0; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="WVxVjoN0" Received: from pps.filterd (m0279865.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 5268q1jB003700; Thu, 6 Mar 2025 11:16:35 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= 8uxFped26gG114tT3NHPlq7fw7m1ZVXw6WKUxqzCDXI=; b=WVxVjoN0pyGWvOwH BncsdNi7Cg+BoAmWGDzz7PfRlk54YKJP5A7FvF2bAw8Rwr7YY2RQQjWB9PCD54r1 sFGgfOaRHq33zWjjLj92iLc7cCJQj4fyNJRU1e0KuZbJxs3HNDHI49YYTrXQN8AB YDMXQKNmPgRVDyF2+DQUyIW2yPXJ8Q76lYXOojpriF+nh09Oq5Bc8UYvjedNNbmm O0BHCutI3ikg9WkwLOrfO0Kg23zqObGkiRGChBOhtEKZonqPRRfQd14UZan1WnlH kUb8uh5QbgRZNsGnWexQKH7QNGyRtCAhb8Fl2ruZq53RPrmvc8bCNocNYwGGt+LF xofubg== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 456wrja1hh-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 06 Mar 2025 11:16:34 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 526BGX4v020884 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 6 Mar 2025 11:16:34 GMT Received: from hu-mmanikan-blr.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Thu, 6 Mar 2025 03:16:30 -0800 From: Manikanta Mylavarapu To: , , , , , , , CC: , Subject: [PATCH v5 1/2] arm64: dts: qcom: ipq5424: Add PCIe PHYs and controller nodes Date: Thu, 6 Mar 2025 16:46:09 +0530 Message-ID: <20250306111610.3313495-2-quic_mmanikan@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20250306111610.3313495-1-quic_mmanikan@quicinc.com> References: <20250306111610.3313495-1-quic_mmanikan@quicinc.com> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 4e0KOOVEOxmLvRzrMInEnZ1yPbJMOF-h X-Authority-Analysis: v=2.4 cv=FYDNxI+6 c=1 sm=1 tr=0 ts=67c98412 cx=c_pps a=ouPCqIW2jiPt+lZRy3xVPw==:117 a=ouPCqIW2jiPt+lZRy3xVPw==:17 a=GEpy-HfZoHoA:10 a=Vs1iUdzkB0EA:10 a=EUspDBNiAAAA:8 a=COk6AnOGAAAA:8 a=LGJC_kMlNMoNBjmRxgkA:9 a=TjNXssC_j7lpFel5tvFf:22 X-Proofpoint-ORIG-GUID: 4e0KOOVEOxmLvRzrMInEnZ1yPbJMOF-h X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1093,Hydra:6.0.680,FMLib:17.12.68.34 definitions=2025-03-06_05,2025-03-06_01,2024-11-22_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 lowpriorityscore=0 suspectscore=0 priorityscore=1501 impostorscore=0 bulkscore=0 mlxlogscore=999 phishscore=0 adultscore=0 mlxscore=0 spamscore=0 clxscore=1015 classifier=spam authscore=0 authtc=n/a authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.19.0-2502100000 definitions=main-2503060085 Add PCIe0, PCIe1, PCIe2, PCIe3 (and corresponding PHY) devices found on IPQ5424 platform. The PCIe0 & PCIe1 are 1-lane Gen3 host whereas PCIe2 & PCIe3 are 2-lane Gen3 host. Reviewed-by: Konrad Dybcio Signed-off-by: Manikanta Mylavarapu --- Changes in V5: - Pick up R-b tag. - Updated pcie node order based on unit address. - Updated the dbi address space size from 0xf1d to 0xf1c in all pcie controller nodes. - Rebased on linux-next tip. arch/arm64/boot/dts/qcom/ipq5424.dtsi | 514 +++++++++++++++++++++++++- 1 file changed, 510 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi index 7a7ad700a382..ff6faffc3b48 100644 --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include #include / { @@ -152,6 +153,258 @@ soc@0 { #size-cells = <2>; ranges = <0 0 0 0 0x10 0>; + pcie0: pcie@80000 { + compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; + reg = <0x0 0x00080000 0x0 0x3000>, + <0x0 0x70000000 0x0 0xf1c>, + <0x0 0x70000f20 0x0 0xa8>, + <0x0 0x70001000 0x0 0x1000>, + <0x0 0x70100000 0x0 0x1000>, + <0x0 0x00086000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x00100000>, + <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x0fd00000>; + + msi-map = <0x0 &intc 0x0 0x1000>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 436 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 437 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE0_RCHNG_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + assigned-clocks = <&gcc GCC_PCIE0_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_RESET>, + <&gcc GCC_PCIE0_AXI_S_STICKY_RESET>, + <&gcc GCC_PCIE0_AXI_S_ARES>, + <&gcc GCC_PCIE0_AXI_M_STICKY_RESET>, + <&gcc GCC_PCIE0_AXI_M_ARES>, + <&gcc GCC_PCIE0_AUX_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>, + <&gcc MASTER_CNOC_PCIE0 &gcc SLAVE_CNOC_PCIE0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie0_phy: phy@84000 { + compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy", + "qcom,ipq9574-qmp-gen3x1-pcie-phy"; + reg = <0x0 0x00084000 0x0 0x2000>; + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + }; + + pcie1: pcie@88000 { + compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; + reg = <0x0 0x00088000 0x0 0x3000>, + <0x0 0x60000000 0x0 0xf1c>, + <0x0 0x60000f20 0x0 0xa8>, + <0x0 0x60001000 0x0 0x1000>, + <0x0 0x60100000 0x0 0x1000>, + <0x0 0x0008e000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <1>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x00100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x0fd00000>; + + msi-map = <0x0 &intc 0x0 0x1000>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 449 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 450 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 451 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 452 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE1_RCHNG_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + assigned-clocks = <&gcc GCC_PCIE1_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_RESET>, + <&gcc GCC_PCIE1_AXI_S_STICKY_RESET>, + <&gcc GCC_PCIE1_AXI_S_ARES>, + <&gcc GCC_PCIE1_AXI_M_STICKY_RESET>, + <&gcc GCC_PCIE1_AXI_M_ARES>, + <&gcc GCC_PCIE1_AUX_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + interconnects = <&gcc MASTER_ANOC_PCIE1 &gcc SLAVE_ANOC_PCIE1>, + <&gcc MASTER_CNOC_PCIE1 &gcc SLAVE_CNOC_PCIE1>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie1_phy: phy@8c000 { + compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy", + "qcom,ipq9574-qmp-gen3x1-pcie-phy"; + reg = <0x0 0x0008c000 0x0 0x2000>; + clocks = <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie1_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + }; + efuse@a4000 { compatible = "qcom,ipq5424-qfprom", "qcom,qfprom"; reg = <0 0x000a4000 0 0x741>; @@ -209,6 +462,259 @@ tsens_base1: base1@41a { }; }; + pcie2: pcie@f0000 { + compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; + reg = <0x0 0x000f0000 0x0 0x3000>, + <0x0 0x50000000 0x0 0xf1c>, + <0x0 0x50000f20 0x0 0xa8>, + <0x0 0x50001000 0x0 0x1000>, + <0x0 0x50100000 0x0 0x1000>, + <0x0 0x000f6000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <2>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x50200000 0x0 0x00100000>, + <0x02000000 0x0 0x50300000 0x0 0x50300000 0x0 0x0fd00000>; + + msi-map = <0x0 &intc 0x0 0x1000>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 464 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 465 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 466 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 467 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE2_AXI_M_CLK>, + <&gcc GCC_PCIE2_AXI_S_CLK>, + <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE2_RCHNG_CLK>, + <&gcc GCC_PCIE2_AHB_CLK>, + <&gcc GCC_PCIE2_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + assigned-clocks = <&gcc GCC_PCIE2_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE2_PIPE_ARES>, + <&gcc GCC_PCIE2_CORE_STICKY_RESET>, + <&gcc GCC_PCIE2_AXI_S_STICKY_RESET>, + <&gcc GCC_PCIE2_AXI_S_ARES>, + <&gcc GCC_PCIE2_AXI_M_STICKY_RESET>, + <&gcc GCC_PCIE2_AXI_M_ARES>, + <&gcc GCC_PCIE2_AUX_ARES>, + <&gcc GCC_PCIE2_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie2_phy>; + phy-names = "pciephy"; + interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>, + <&gcc MASTER_CNOC_PCIE2 &gcc SLAVE_CNOC_PCIE2>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie2_phy: phy@f4000 { + compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy", + "qcom,ipq9574-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x000f4000 0x0 0x2000>; + clocks = <&gcc GCC_PCIE2_AUX_CLK>, + <&gcc GCC_PCIE2_AHB_CLK>, + <&gcc GCC_PCIE2_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE2_PHY_BCR>, + <&gcc GCC_PCIE2PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie2_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + }; + + pcie3: pcie@f8000 { + compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; + reg = <0x0 0x000f8000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf1c>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x1000>, + <0x0 0x40100000 0x0 0x1000>, + <0x0 0x000fe000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <3>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x00100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x0fd00000>; + + msi-map = <0x0 &intc 0x0 0x1000>; + + interrupts = , + , + , + , + , + , + , + , + ; + + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 479 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 480 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 481 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 482 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE3_AXI_M_CLK>, + <&gcc GCC_PCIE3_AXI_S_CLK>, + <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE3_RCHNG_CLK>, + <&gcc GCC_PCIE3_AHB_CLK>, + <&gcc GCC_PCIE3_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + assigned-clocks = <&gcc GCC_PCIE3_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE3_PIPE_ARES>, + <&gcc GCC_PCIE3_CORE_STICKY_RESET>, + <&gcc GCC_PCIE3_AXI_S_STICKY_RESET>, + <&gcc GCC_PCIE3_AXI_S_ARES>, + <&gcc GCC_PCIE3_AXI_M_STICKY_RESET>, + <&gcc GCC_PCIE3_AXI_M_ARES>, + <&gcc GCC_PCIE3_AUX_ARES>, + <&gcc GCC_PCIE3_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie3_phy>; + phy-names = "pciephy"; + interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>, + <&gcc MASTER_CNOC_PCIE3 &gcc SLAVE_CNOC_PCIE3>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie3_phy: phy@fc000 { + compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy", + "qcom,ipq9574-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x000fc000 0x0 0x2000>; + clocks = <&gcc GCC_PCIE3_AUX_CLK>, + <&gcc GCC_PCIE3_AHB_CLK>, + <&gcc GCC_PCIE3_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE3_PHY_BCR>, + <&gcc GCC_PCIE3PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie3_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + }; + tsens: thermal-sensor@4a9000 { compatible = "qcom,ipq5424-tsens"; reg = <0 0x004a9000 0 0x1000>, @@ -276,10 +782,10 @@ gcc: clock-controller@1800000 { reg = <0 0x01800000 0 0x40000>; clocks = <&xo_board>, <&sleep_clk>, - <0>, - <0>, - <0>, - <0>, + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie2_phy>, + <&pcie3_phy>, <0>; #clock-cells = <1>; #reset-cells = <1>;