diff mbox series

[v1,4/8] arm64: dts: qcom: qcs6490-rb3gen2: add WSA8830 speakers amplifier

Message ID 20250317054151.6095-5-quic_pkumpatl@quicinc.com (mailing list archive)
State New
Headers show
Series Enable audio on qcs6490-RB3Gen2 and qcm6490-idp boards | expand

Commit Message

Prasad Kumpatla March 17, 2025, 5:41 a.m. UTC
From: Mohammad Rafi Shaik <quic_mohs@quicinc.com>

Add nodes for WSA8830 speakers amplifier on qcs6490-rb3gen2 board.

Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 27 ++++++++++++++++++++
 1 file changed, 27 insertions(+)

Comments

Jorge Ramirez March 26, 2025, 5:28 p.m. UTC | #1
On 17/03/25 11:11:47, Prasad Kumpatla wrote:
> From: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> 
> Add nodes for WSA8830 speakers amplifier on qcs6490-rb3gen2 board.
> 
> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
> Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 27 ++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 23dea375c213..a1a3df77ad57 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -870,6 +870,33 @@ &sdhc_2 {
>  	status = "okay";
>  };
>  
> +&swr2 {
> +	qcom,din-ports = <0>;
> +	qcom,dout-ports = <8>;

are these number of ports correct? from my unit tests, 8 seems to be out
of bounds (soundwire probe error)

> +
> +	left_spkr: speaker@0,1 {
> +		compatible = "sdw10217020200";
> +		reg = <0 1>;
> +		powerdown-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
> +		#sound-dai-cells = <0>;
> +		sound-name-prefix = "SpkrLeft";
> +		#thermal-sensor-cells = <0>;
> +		vdd-supply = <&vreg_l18b_1p8>;
> +		qcom,port-mapping = <1 2 3 7>;
> +	};
> +
> +	right_spkr: speaker@0,2 {
> +		compatible = "sdw10217020200";
> +		reg = <0 2>;
> +		powerdown-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
> +		#sound-dai-cells = <0>;
> +		sound-name-prefix = "SpkrRight";
> +		#thermal-sensor-cells = <0>;
> +		vdd-supply = <&vreg_l18b_1p8>;
> +		qcom,port-mapping = <4 5 6 8>;
> +	};
> +};
> +

also, should we enable the soundwire controller?

>  &tlmm {
>  	gpio-reserved-ranges = <32 2>, /* ADSP */
>  			       <48 4>; /* NFC */
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 23dea375c213..a1a3df77ad57 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -870,6 +870,33 @@  &sdhc_2 {
 	status = "okay";
 };
 
+&swr2 {
+	qcom,din-ports = <0>;
+	qcom,dout-ports = <8>;
+
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		powerdown-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <1 2 3 7>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		powerdown-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <4 5 6 8>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */