| Message ID | 2f215e2dabec345ec7f28e759c9463854959cced.1701695218.git.quic_jsuraj@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Ethernet DWMAC5 fault IRQ support | expand |
On Mon, 04 Dec 2023 18:56:15 +0530, Suraj Jaiswal wrote: > Add binding doc for safety IRQ. The safety IRQ will be > triggered for ECC, DPP, FSM error. > > Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com> > --- > Documentation/devicetree/bindings/net/qcom,ethqos.yaml | 9 ++++++--- > Documentation/devicetree/bindings/net/snps,dwmac.yaml | 5 +++-- > 2 files changed, 9 insertions(+), 5 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/snps,dwmac.example.dtb: ethernet@e0800000: interrupt-names:2: 'eth_lpi' is not one of ['eth_wake_irq', 'safety'] from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.example.dtb: ethernet@16030000: interrupt-names:2: 'eth_lpi' is not one of ['eth_wake_irq', 'safety'] from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.example.dtb: ethernet@16030000: interrupt-names:2: 'eth_lpi' is not one of ['eth_wake_irq', 'safety'] from schema $id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.example.dtb: ethernet@16030000: Unevaluated properties are not allowed ('mdio', 'phy-handle', 'phy-mode', 'rx-fifo-depth', 'snps,axi-config', 'snps,en-tx-lpi-clockgating', 'snps,fixed-burst', 'snps,force_thresh_dma_mode', 'snps,multicast-filter-bins', 'snps,no-pbl-x8', 'snps,perfect-filter-entries', 'snps,rxpbl', 'snps,tso', 'snps,txpbl', 'stmmac-axi-config', 'tx-fifo-depth' were unexpected) from schema $id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/2f215e2dabec345ec7f28e759c9463854959cced.1701695218.git.quic_jsuraj@quicinc.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index 7bdb412a0185..93d21389e518 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -37,12 +37,14 @@ properties: items: - description: Combined signal for various interrupt events - description: The interrupt that occurs when Rx exits the LPI state + - description: The interrupt that occurs when HW safety error triggered interrupt-names: minItems: 1 items: - const: macirq - - const: eth_lpi + - enum: [eth_lpi, safety] + - const: safety clocks: maxItems: 4 @@ -89,8 +91,9 @@ examples: <&gcc GCC_ETH_PTP_CLK>, <&gcc GCC_ETH_RGMII_CLK>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_lpi"; + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi", "safety"; rx-fifo-depth = <4096>; tx-fifo-depth = <4096>; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 5c2769dc689a..82ddee0ed1d1 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -107,13 +107,14 @@ properties: - description: Combined signal for various interrupt events - description: The interrupt to manage the remote wake-up packet detection - description: The interrupt that occurs when Rx exits the LPI state + - description: The interrupt that occurs when HW safety error triggered interrupt-names: minItems: 1 items: - const: macirq - - enum: [eth_wake_irq, eth_lpi] - - const: eth_lpi + - enum: [eth_wake_irq, eth_lpi, safety] + - enum: [eth_wake_irq, safety] clocks: minItems: 1
Add binding doc for safety IRQ. The safety IRQ will be triggered for ECC, DPP, FSM error. Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com> --- Documentation/devicetree/bindings/net/qcom,ethqos.yaml | 9 ++++++--- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 5 +++-- 2 files changed, 9 insertions(+), 5 deletions(-)