diff mbox series

[PATCHv4,1/2] soc: qcom: llcc: Move attribute config to its own function

Message ID 343db8a7b0e85ae6e29b9e79b68b98c22fcbcdce.1599974998.git.saiprakash.ranjan@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series soc: qcom: llcc: Support chipsets that can write to llcc regs | expand

Commit Message

Sai Prakash Ranjan Sept. 14, 2020, 11:12 a.m. UTC 
Cleanup qcom_llcc_cfg_program() by moving llcc attribute
configuration to a separate function of its own. Also
correct misspelled 'instance' caught by checkpatch.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
---
 drivers/soc/qcom/llcc-qcom.c | 75 ++++++++++++++++++++----------------
 1 file changed, 41 insertions(+), 34 deletions(-)

Comments

Stephen Boyd Sept. 14, 2020, 6:44 p.m. UTC | #1 
Quoting Sai Prakash Ranjan (2020-09-14 04:12:59)
> Cleanup qcom_llcc_cfg_program() by moving llcc attribute
> configuration to a separate function of its own. Also
> correct misspelled 'instance' caught by checkpatch.
> 
> Suggested-by: Stephen Boyd <swboyd@chromium.org>
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> ---
>  drivers/soc/qcom/llcc-qcom.c | 75 ++++++++++++++++++++----------------
>  1 file changed, 41 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> index 429b5a60a1ba..60ee31842dea 100644
> --- a/drivers/soc/qcom/llcc-qcom.c
> +++ b/drivers/soc/qcom/llcc-qcom.c
> @@ -318,14 +318,50 @@ size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
>  }
>  EXPORT_SYMBOL_GPL(llcc_get_slice_size);
>  
> -static int qcom_llcc_cfg_program(struct platform_device *pdev)
> +static int qcom_llcc_attr_cfg(const struct llcc_slice_config *table)

Call it config? It's certainly not a table.

>  {
> -       int i;
>         u32 attr1_cfg;
>         u32 attr0_cfg;
>         u32 attr1_val;
>         u32 attr0_val;
>         u32 max_cap_cacheline;
> +       int ret;
> +
> +       attr1_cfg = LLCC_TRP_ATTR1_CFGn(table->slice_id);
> +       attr0_cfg = LLCC_TRP_ATTR0_CFGn(table->slice_id);

Can this move down to near where it is used?

> +
> +       attr1_val = table->cache_mode;
> +       attr1_val |= table->probe_target_ways << ATTR1_PROBE_TARGET_WAYS_SHIFT;
> +       attr1_val |= table->fixed_size << ATTR1_FIXED_SIZE_SHIFT;
> +       attr1_val |= table->priority << ATTR1_PRIORITY_SHIFT;
> +
> +       max_cap_cacheline = MAX_CAP_TO_BYTES(table->max_cap);
> +
> +       /* LLCC instances can vary for each target.

The /* should be on a line by itself.

> +        * The SW writes to broadcast register which gets propagated
> +        * to each llcc instance (llcc0,.. llccN).
> +        * Since the size of the memory is divided equally amongst the
> +        * llcc instances, we need to configure the max cap accordingly.
> +        */
> +       max_cap_cacheline = max_cap_cacheline / drv_data->num_banks;
> +       max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
> +       attr1_val |= max_cap_cacheline << ATTR1_MAX_CAP_SHIFT;
> +
> +       attr0_val = table->res_ways & ATTR0_RES_WAYS_MASK;
> +       attr0_val |= table->bonus_ways << ATTR0_BONUS_WAYS_SHIFT;
> +
> +       ret = regmap_write(drv_data->bcast_regmap, attr1_cfg, attr1_val);
> +       if (ret)
> +               return ret;
> +
> +       ret = regmap_write(drv_data->bcast_regmap, attr0_cfg, attr0_val);
> +
> +       return ret;

return regmap_write(...)

> +}
> +
> +static int qcom_llcc_cfg_program(struct platform_device *pdev)
> +{
> +       int i;
>         u32 sz;
>         int ret = 0;
>         const struct llcc_slice_config *llcc_table;
Sai Prakash Ranjan Sept. 15, 2020, 5:25 a.m. UTC | #2 
On 2020-09-15 00:14, Stephen Boyd wrote:
> Quoting Sai Prakash Ranjan (2020-09-14 04:12:59)
>> Cleanup qcom_llcc_cfg_program() by moving llcc attribute
>> configuration to a separate function of its own. Also
>> correct misspelled 'instance' caught by checkpatch.
>> 
>> Suggested-by: Stephen Boyd <swboyd@chromium.org>
>> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
>> ---
>>  drivers/soc/qcom/llcc-qcom.c | 75 
>> ++++++++++++++++++++----------------
>>  1 file changed, 41 insertions(+), 34 deletions(-)
>> 
>> diff --git a/drivers/soc/qcom/llcc-qcom.c 
>> b/drivers/soc/qcom/llcc-qcom.c
>> index 429b5a60a1ba..60ee31842dea 100644
>> --- a/drivers/soc/qcom/llcc-qcom.c
>> +++ b/drivers/soc/qcom/llcc-qcom.c
>> @@ -318,14 +318,50 @@ size_t llcc_get_slice_size(struct 
>> llcc_slice_desc *desc)
>>  }
>>  EXPORT_SYMBOL_GPL(llcc_get_slice_size);
>> 
>> -static int qcom_llcc_cfg_program(struct platform_device *pdev)
>> +static int qcom_llcc_attr_cfg(const struct llcc_slice_config *table)
> 
> Call it config? It's certainly not a table.
> 

Yes, will do.

>>  {
>> -       int i;
>>         u32 attr1_cfg;
>>         u32 attr0_cfg;
>>         u32 attr1_val;
>>         u32 attr0_val;
>>         u32 max_cap_cacheline;
>> +       int ret;
>> +
>> +       attr1_cfg = LLCC_TRP_ATTR1_CFGn(table->slice_id);
>> +       attr0_cfg = LLCC_TRP_ATTR0_CFGn(table->slice_id);
> 
> Can this move down to near where it is used?
> 

Sure.

>> +
>> +       attr1_val = table->cache_mode;
>> +       attr1_val |= table->probe_target_ways << 
>> ATTR1_PROBE_TARGET_WAYS_SHIFT;
>> +       attr1_val |= table->fixed_size << ATTR1_FIXED_SIZE_SHIFT;
>> +       attr1_val |= table->priority << ATTR1_PRIORITY_SHIFT;
>> +
>> +       max_cap_cacheline = MAX_CAP_TO_BYTES(table->max_cap);
>> +
>> +       /* LLCC instances can vary for each target.
> 
> The /* should be on a line by itself.
> 

This was there before I moved this hunk but I will fix it.

>> +        * The SW writes to broadcast register which gets propagated
>> +        * to each llcc instance (llcc0,.. llccN).
>> +        * Since the size of the memory is divided equally amongst the
>> +        * llcc instances, we need to configure the max cap 
>> accordingly.
>> +        */
>> +       max_cap_cacheline = max_cap_cacheline / drv_data->num_banks;
>> +       max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
>> +       attr1_val |= max_cap_cacheline << ATTR1_MAX_CAP_SHIFT;
>> +
>> +       attr0_val = table->res_ways & ATTR0_RES_WAYS_MASK;
>> +       attr0_val |= table->bonus_ways << ATTR0_BONUS_WAYS_SHIFT;
>> +
>> +       ret = regmap_write(drv_data->bcast_regmap, attr1_cfg, 
>> attr1_val);
>> +       if (ret)
>> +               return ret;
>> +
>> +       ret = regmap_write(drv_data->bcast_regmap, attr0_cfg, 
>> attr0_val);
>> +
>> +       return ret;
> 
> return regmap_write(...)
> 

Ok done.

Thanks,
Sai
diff mbox series

Patch

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 429b5a60a1ba..60ee31842dea 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -318,14 +318,50 @@  size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
 }
 EXPORT_SYMBOL_GPL(llcc_get_slice_size);
 
-static int qcom_llcc_cfg_program(struct platform_device *pdev)
+static int qcom_llcc_attr_cfg(const struct llcc_slice_config *table)
 {
-	int i;
 	u32 attr1_cfg;
 	u32 attr0_cfg;
 	u32 attr1_val;
 	u32 attr0_val;
 	u32 max_cap_cacheline;
+	int ret;
+
+	attr1_cfg = LLCC_TRP_ATTR1_CFGn(table->slice_id);
+	attr0_cfg = LLCC_TRP_ATTR0_CFGn(table->slice_id);
+
+	attr1_val = table->cache_mode;
+	attr1_val |= table->probe_target_ways << ATTR1_PROBE_TARGET_WAYS_SHIFT;
+	attr1_val |= table->fixed_size << ATTR1_FIXED_SIZE_SHIFT;
+	attr1_val |= table->priority << ATTR1_PRIORITY_SHIFT;
+
+	max_cap_cacheline = MAX_CAP_TO_BYTES(table->max_cap);
+
+	/* LLCC instances can vary for each target.
+	 * The SW writes to broadcast register which gets propagated
+	 * to each llcc instance (llcc0,.. llccN).
+	 * Since the size of the memory is divided equally amongst the
+	 * llcc instances, we need to configure the max cap accordingly.
+	 */
+	max_cap_cacheline = max_cap_cacheline / drv_data->num_banks;
+	max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
+	attr1_val |= max_cap_cacheline << ATTR1_MAX_CAP_SHIFT;
+
+	attr0_val = table->res_ways & ATTR0_RES_WAYS_MASK;
+	attr0_val |= table->bonus_ways << ATTR0_BONUS_WAYS_SHIFT;
+
+	ret = regmap_write(drv_data->bcast_regmap, attr1_cfg, attr1_val);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(drv_data->bcast_regmap, attr0_cfg, attr0_val);
+
+	return ret;
+}
+
+static int qcom_llcc_cfg_program(struct platform_device *pdev)
+{
+	int i;
 	u32 sz;
 	int ret = 0;
 	const struct llcc_slice_config *llcc_table;
@@ -335,45 +371,16 @@  static int qcom_llcc_cfg_program(struct platform_device *pdev)
 	llcc_table = drv_data->cfg;
 
 	for (i = 0; i < sz; i++) {
-		attr1_cfg = LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
-		attr0_cfg = LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
-
-		attr1_val = llcc_table[i].cache_mode;
-		attr1_val |= llcc_table[i].probe_target_ways <<
-				ATTR1_PROBE_TARGET_WAYS_SHIFT;
-		attr1_val |= llcc_table[i].fixed_size <<
-				ATTR1_FIXED_SIZE_SHIFT;
-		attr1_val |= llcc_table[i].priority <<
-				ATTR1_PRIORITY_SHIFT;
-
-		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
-
-		/* LLCC instances can vary for each target.
-		 * The SW writes to broadcast register which gets propagated
-		 * to each llcc instace (llcc0,.. llccN).
-		 * Since the size of the memory is divided equally amongst the
-		 * llcc instances, we need to configure the max cap accordingly.
-		 */
-		max_cap_cacheline = max_cap_cacheline / drv_data->num_banks;
-		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
-		attr1_val |= max_cap_cacheline << ATTR1_MAX_CAP_SHIFT;
-
-		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
-		attr0_val |= llcc_table[i].bonus_ways << ATTR0_BONUS_WAYS_SHIFT;
-
-		ret = regmap_write(drv_data->bcast_regmap, attr1_cfg,
-					attr1_val);
-		if (ret)
-			return ret;
-		ret = regmap_write(drv_data->bcast_regmap, attr0_cfg,
-					attr0_val);
+		ret = qcom_llcc_attr_cfg(&llcc_table[i]);
 		if (ret)
 			return ret;
+
 		if (llcc_table[i].activate_on_init) {
 			desc.slice_id = llcc_table[i].slice_id;
 			ret = llcc_slice_activate(&desc);
 		}
 	}
+
 	return ret;
 }