diff mbox series

[16/33] spmi: hisi-spmi-controller: fix the dev_foo() logic

Message ID 3d20ec2b40ba1c339fd7e0d74ff34863b3d58e35.1597160086.git.mchehab+huawei@kernel.org (mailing list archive)
State New, archived
Headers show
Series Add driver for HiSilicon SPMI PMIC for Hikey 970 | expand

Commit Message

Mauro Carvalho Chehab Aug. 11, 2020, 3:41 p.m. UTC
Right now, driver is printing some messages as:

	[   33.833026] (NULL device *): spmi_read_cmd: id:0 addr:0x17, read value: 00

This is because dev_foo() are not using a device with a name
set. Change the logic for it to print it right.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/spmi/hisi-spmi-controller.c | 41 +++++++++++++++--------------
 1 file changed, 21 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spmi/hisi-spmi-controller.c b/drivers/spmi/hisi-spmi-controller.c
index e996114bc717..153bcdb0cde4 100644
--- a/drivers/spmi/hisi-spmi-controller.c
+++ b/drivers/spmi/hisi-spmi-controller.c
@@ -102,7 +102,8 @@  struct spmi_controller_dev {
 	u32			channel;
 };
 
-static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
+static int spmi_controller_wait_for_done(struct device *dev,
+					 struct spmi_controller_dev *ctrl_dev,
 					 void __iomem *base, u8 sid, u16 addr)
 {
 	u32 status = 0;
@@ -117,19 +118,17 @@  static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
 
 		if (status & SPMI_APB_TRANS_DONE) {
 			if (status & SPMI_APB_TRANS_FAIL) {
-				dev_err(ctrl_dev->dev,
-					"%s: transaction failed (0x%x)\n",
+				dev_err(dev, "%s: transaction failed (0x%x)\n",
 					__func__, status);
 				return -EIO;
 			}
+			dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
 			return 0;
 		}
 		udelay(1);
 	}
 
-	dev_err(ctrl_dev->dev,
-		"%s: timeout, status 0x%x\n",
-		__func__, status);
+	dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
 	return -ETIMEDOUT;
 }
 
@@ -145,9 +144,9 @@  static int spmi_read_cmd(struct spmi_controller *ctrl,
 	u8 op_code, i;
 
 	if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
-		dev_err(spmi_controller->dev
-		, "spmi_controller supports 1..%d bytes per trans, but:%ld requested"
-					, SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+		dev_err(&ctrl->dev,
+			"spmi_controller supports 1..%d bytes per trans, but:%ld requested",
+			SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
 		return  -EINVAL;
 	}
 
@@ -159,7 +158,7 @@  static int spmi_read_cmd(struct spmi_controller *ctrl,
 	} else if (opc == SPMI_CMD_EXT_READL) {
 		op_code = SPMI_CMD_EXT_REG_READ_L;
 	} else {
-		dev_err(spmi_controller->dev, "invalid read cmd 0x%x", opc);
+		dev_err(&ctrl->dev, "invalid read cmd 0x%x", opc);
 		return -EINVAL;
 	}
 
@@ -173,7 +172,7 @@  static int spmi_read_cmd(struct spmi_controller *ctrl,
 
 	writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
 
-	rc = spmi_controller_wait_for_done(spmi_controller,
+	rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
 					   spmi_controller->base, sid, addr);
 	if (rc)
 		goto done;
@@ -195,10 +194,11 @@  static int spmi_read_cmd(struct spmi_controller *ctrl,
 done:
 	spin_unlock_irqrestore(&spmi_controller->lock, flags);
 	if (rc)
-		dev_err(spmi_controller->dev, "spmi read wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
+		dev_err(&ctrl->dev,
+			"spmi read wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
 			opc, sid, addr, bc + 1);
 	else
-		dev_dbg(spmi_controller->dev, "%s: id:%d addr:0x%x, read value: %*ph\n",
+		dev_dbg(&ctrl->dev, "%s: id:%d addr:0x%x, read value: %*ph\n",
 			__func__, sid, addr, (int)bc, __buf);
 
 	return rc;
@@ -216,9 +216,9 @@  static int spmi_write_cmd(struct spmi_controller *ctrl,
 	u8 op_code, i;
 
 	if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
-		dev_err(spmi_controller->dev
-		, "spmi_controller supports 1..%d bytes per trans, but:%ld requested"
-					, SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+		dev_err(&ctrl->dev,
+			"spmi_controller supports 1..%d bytes per trans, but:%ld requested",
+			SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
 		return  -EINVAL;
 	}
 
@@ -230,7 +230,7 @@  static int spmi_write_cmd(struct spmi_controller *ctrl,
 	} else if (opc == SPMI_CMD_EXT_WRITEL) {
 		op_code = SPMI_CMD_EXT_REG_WRITE_L;
 	} else {
-		dev_err(spmi_controller->dev, "invalid write cmd 0x%x", opc);
+		dev_err(&ctrl->dev, "invalid write cmd 0x%x", opc);
 		return -EINVAL;
 	}
 
@@ -262,14 +262,15 @@  static int spmi_write_cmd(struct spmi_controller *ctrl,
 	/* Start the transaction */
 	writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
 
-	rc = spmi_controller_wait_for_done(spmi_controller, spmi_controller->base, sid, addr);
+	rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+					   spmi_controller->base, sid, addr);
 	spin_unlock_irqrestore(&spmi_controller->lock, flags);
 
 	if (rc)
-		dev_err(spmi_controller->dev, "spmi write wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
+		dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x sid:%d addr:0x%x bc:%ld\n",
 			opc, sid, addr, bc);
 	else
-		dev_dbg(spmi_controller->dev, "%s: id:%d addr:0x%x, wrote value: %*ph\n",
+		dev_dbg(&ctrl->dev, "%s: id:%d addr:0x%x, wrote value: %*ph\n",
 			__func__, sid, addr, (int)bc, __buf);
 
 	return rc;