From patchwork Wed Sep 10 09:07:20 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivas Kandagatla X-Patchwork-Id: 4875271 Return-Path: X-Original-To: patchwork-linux-arm-msm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 84776C0338 for ; Wed, 10 Sep 2014 09:07:40 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 2A16120166 for ; Wed, 10 Sep 2014 09:07:39 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9EEA5200E0 for ; Wed, 10 Sep 2014 09:07:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751457AbaIJJHd (ORCPT ); Wed, 10 Sep 2014 05:07:33 -0400 Received: from mail-we0-f171.google.com ([74.125.82.171]:37803 "EHLO mail-we0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751387AbaIJJHZ (ORCPT ); Wed, 10 Sep 2014 05:07:25 -0400 Received: by mail-we0-f171.google.com with SMTP id p10so1878202wes.30 for ; Wed, 10 Sep 2014 02:07:24 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:message-id:date:from:user-agent:mime-version:to :cc:subject:references:in-reply-to:content-type :content-transfer-encoding; bh=ZxOi0U7qHdxryZiZAqyvr+NYYGRvKO+/CDG7W9GbVqs=; b=XKzJb/ejte3YAQE2qulfRHcKYk0ufKZAfjPNiRG+0q9ylLgp7ZjtjD5Oho6wWAFTo6 mXGsI5goF58FZjeliK0cO1JFH/6aMsXYP0BDGcboKR4OnhWaFlwfvfiP1R1blvDNRYow ylysSWzWwXUIbJCxYoIlrb4lkNp5LZtjcK7f/eZMYmOGyOIr87pqk1SWc9t/ynFmKjbd ZIJ34XsUoF1JnrhIcCkM2XiWb+M7Qcge5mqAk/4CqvJ7tTeZxQfv1jV/PoelB03OImI/ aoYhmx/VVCY9CsaQKkrjDa8sOJIML/PFzemzTu5jdcgt91u7sNxH+LjY+4VkhFrk4Gtc BMiQ== X-Gm-Message-State: ALoCoQkmNF0TacZdQPS/XADAOSkRdtOLnj5c7Tni9ouk55dPC8iKRGQaqPrw/VppvN6xYjpN74J1 X-Received: by 10.194.79.137 with SMTP id j9mr14718836wjx.79.1410340044059; Wed, 10 Sep 2014 02:07:24 -0700 (PDT) Received: from [192.168.1.7] (host-78-148-158-3.as13285.net. [78.148.158.3]) by mx.google.com with ESMTPSA id w2sm1658743wia.11.2014.09.10.02.07.22 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Wed, 10 Sep 2014 02:07:23 -0700 (PDT) Message-ID: <541014C8.7050303@linaro.org> Date: Wed, 10 Sep 2014 10:07:20 +0100 From: Srinivas Kandagatla User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: Ulf Hansson CC: linux-mmc , Linus Walleij , Chris Ball , Russell King , "linux-kernel@vger.kernel.org" , "linux-arm-msm@vger.kernel.org" Subject: Re: [PATCH v3 1/3] mmc: mmci: Support any block sizes for ux500v2 and qcom variant References: <1408683219-7939-1-git-send-email-srinivas.kandagatla@linaro.org> <1408683272-7984-1-git-send-email-srinivas.kandagatla@linaro.org> In-Reply-To: Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org X-Spam-Status: No, score=-9.4 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Hi Ulf, On 10/09/14 08:58, Ulf Hansson wrote: > On 22 August 2014 06:54, Srinivas Kandagatla > wrote: >> From: Ulf Hansson >> >> For the ux500v2 variant of the PL18x block, any block sizes are >> supported. This will make it possible to decrease data overhead >> for SDIO transfers. >> >> This patch is based on Ulf Hansson patch >> http://www.spinics.net/lists/linux-mmc/msg12160.html >> >> Signed-off-by: Srinivas Kandagatla >> enabled this support on qcom variant. >> >> Signed-off-by: Ulf Hansson >> Signed-off-by: Linus Walleij > > I am not sure how to handle this patch. > > It will as you say in the cover letter for this patchset, improve > situations for the ath6kl driver when it's issuing 12 bytes and 24 > bytes reads and solve those issues. > > On the other hand, as stated earlier mmci_pio_write need to be fixed > to have full support for any block size. That applies to the qcom > variant as well. looking at current mmci_pio_write, I see it can support any block sizes as it is. Unless Am missing something obvious. block size aligned to 4 is taken care in the code and is straight forward. block sizes not aligned to 4 are also partly taken care in pio_write and partly by programming blksz in datactrl register. However Am not sure if it was safe to handle the buffer pointer out of its boundary. > > For ux500, I am sure this won't cause any regressions since the cw1200 > isn't probed. Also, I am not sure the "any block size" support is even > enabled for that driver. > > How about, that we add a comment in the pio_write function describing > that we need to fix it for "SDIO any block size" support? And leave > that as a future improvement? Is below patch any good? With the below patch It should be possible to address the case where buffer passed the length is handled safely. If you ok with the approach I can send a patch as RFC. ----cut here---- ptr += count; remain -= count; ----cut here---- thanks, srini > > Kind regards > Uffe > >> --- >> drivers/mmc/host/mmci.c | 10 +++++++--- >> 1 file changed, 7 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c >> index c11cb05..533ad2b 100644 >> --- a/drivers/mmc/host/mmci.c >> +++ b/drivers/mmc/host/mmci.c >> @@ -77,6 +77,7 @@ static unsigned int fmax = 515633; >> * @qcom_fifo: enables qcom specific fifo pio read logic. >> * @reversed_irq_handling: handle data irq before cmd irq. >> * @qcom_dml: enables qcom specific dma glue for dma transfers. >> + * @any_blksize: true if block any sizes are supported >> */ >> struct variant_data { >> unsigned int clkreg; >> @@ -102,6 +103,7 @@ struct variant_data { >> bool qcom_fifo; >> bool reversed_irq_handling; >> bool qcom_dml; >> + bool any_blksize; >> }; >> >> static struct variant_data variant_arm = { >> @@ -194,6 +196,7 @@ static struct variant_data variant_ux500v2 = { >> .pwrreg_clkgate = true, >> .busy_detect = true, >> .pwrreg_nopower = true, >> + .any_blksize = true, >> }; >> >> static struct variant_data variant_qcom = { >> @@ -212,6 +215,7 @@ static struct variant_data variant_qcom = { >> .explicit_mclk_control = true, >> .qcom_fifo = true, >> .qcom_dml = true, >> + .any_blksize = true, >> }; >> >> static int mmci_card_busy(struct mmc_host *mmc) >> @@ -239,10 +243,11 @@ static int mmci_card_busy(struct mmc_host *mmc) >> static int mmci_validate_data(struct mmci_host *host, >> struct mmc_data *data) >> { >> + struct variant_data *variant = host->variant; >> + >> if (!data) >> return 0; >> - >> - if (!is_power_of_2(data->blksz)) { >> + if (!is_power_of_2(data->blksz) && !variant->any_blksize) { >> dev_err(mmc_dev(host->mmc), >> "unsupported block size (%d bytes)\n", data->blksz); >> return -EINVAL; >> @@ -796,7 +801,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) >> writel(host->size, base + MMCIDATALENGTH); >> >> blksz_bits = ffs(data->blksz) - 1; >> - BUG_ON(1 << blksz_bits != data->blksz); >> >> if (variant->blksz_datactrl16) >> datactrl = MCI_DPSM_ENABLE | (data->blksz << 16); >> -- >> 1.9.1 >> --- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 264c947..8480c02 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1134,7 +1134,20 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem * byte become a 32bit write, 7 bytes will be two * 32bit writes etc. */ - iowrite32_rep(base + MMCIFIFO, ptr, (count + 3) >> 2); + if (unlikely(count & 0x3)) { + unsigned char buf[4] = {0, }; + + if (count < 4) { + memcpy(buf, ptr, count); + iowrite32_rep(base + MMCIFIFO, buf, 1); + } else { + iowrite32_rep(base + MMCIFIFO, ptr, count >> 2); + memcpy(buf, ptr + (count & ~0x3), count & 0x3); + iowrite32_rep(base + MMCIFIFO, buf, 1); + } + } else { + iowrite32_rep(base + MMCIFIFO, ptr, count >> 2); + }