diff mbox series

[PATCHv2,2/4] arm64: dts: qcom: msm8996: Add Coresight support

Message ID 552e408950525b1bac39d05b8b4f2ae1975397e0.1547798966.git.saiprakash.ranjan@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series Add coresight support for SDM845 and MSM8996 | expand

Commit Message

Sai Prakash Ranjan Jan. 18, 2019, 8:25 a.m. UTC
From: Vivek Gautam <vivek.gautam@codeaurora.org>

Enable coresight support by adding device nodes for the
available source, sinks and channel blocks on msm8996.

This also adds coresight cpu debug nodes.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 447 ++++++++++++++++++++++++++
 1 file changed, 447 insertions(+)

Comments

Suzuki K Poulose Jan. 18, 2019, 10:57 a.m. UTC | #1
Sai,

On 18/01/2019 08:25, Sai Prakash Ranjan wrote:
> From: Vivek Gautam <vivek.gautam@codeaurora.org>
> 
> Enable coresight support by adding device nodes for the
> available source, sinks and channel blocks on msm8996.
> 
> This also adds coresight cpu debug nodes.
> 
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> ---
>   arch/arm64/boot/dts/qcom/msm8996.dtsi | 447 ++++++++++++++++++++++++++
>   1 file changed, 447 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 99b7495455a6..96a16d5a258c 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi

> +
> +		etr@3028000 {
> +			compatible = "arm,coresight-tmc", "arm,primecell";
> +			reg = <0x3028000 0x1000>;
> +
> +			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> +			clock-names = "apb_pclk", "atclk";

If you want to use the scatter-gather mode, you must add "arm,scatter-gather"
property to the node here.

Have you tested the scatter-gather mode on the chip ? Does that work at all ?
Note: You could try this by setting a buffer_size > 1M for the ETR and use
it as a sink from the sysfs mode.

Cheers
Suzuki
Sai Prakash Ranjan Jan. 18, 2019, 11:48 a.m. UTC | #2
Hi Suzuki,

On 1/18/2019 4:27 PM, Suzuki K Poulose wrote:
> 
> If you want to use the scatter-gather mode, you must add 
> "arm,scatter-gather"
> property to the node here.
> 
> Have you tested the scatter-gather mode on the chip ? Does that work at 
> all ?
> Note: You could try this by setting a buffer_size > 1M for the ETR and use
> it as a sink from the sysfs mode.
> 

Yes the chip supports scatter-gather mode[1]. But is it required in
dt node since it's an optional property?

[1] 
https://source.codeaurora.org/quic/la/kernel/msm-3.18/tree/arch/arm/boot/dts/qcom/msm8996-coresight-v3.dtsi?h=LA.BR.5.6#n24

Thanks,
Sai
Suzuki K Poulose Jan. 18, 2019, 12:04 p.m. UTC | #3
Hi,

On 18/01/2019 11:48, Sai Prakash Ranjan wrote:
> Hi Suzuki,
> 
> On 1/18/2019 4:27 PM, Suzuki K Poulose wrote:
>>
>> If you want to use the scatter-gather mode, you must add
>> "arm,scatter-gather"
>> property to the node here.
>>
>> Have you tested the scatter-gather mode on the chip ? Does that work at
>> all ?
>> Note: You could try this by setting a buffer_size > 1M for the ETR and use
>> it as a sink from the sysfs mode.
>>
> 
> Yes the chip supports scatter-gather mode[1]. But is it required in
> dt node since it's an optional property?

If you would like to use the scatter-gather mode, you must specify it
explicitly. We have had some other boards with broken scatter-gather
mode integration which causes mysterious issues when used. So we have
a white-list approach for enabling the scatter-gather mode in the driver.

So, if you have tested to make sure that the mode works fine with a recent
kernel version (v4.19 onwards), you may want to add the property.

Suzuki
Sai Prakash Ranjan Jan. 18, 2019, 12:08 p.m. UTC | #4
Hi Suzuki,

On 1/18/2019 5:34 PM, Suzuki K Poulose wrote:
> If you would like to use the scatter-gather mode, you must specify it
> explicitly. We have had some other boards with broken scatter-gather
> mode integration which causes mysterious issues when used. So we have
> a white-list approach for enabling the scatter-gather mode in the driver.
> 
> So, if you have tested to make sure that the mode works fine with a recent
> kernel version (v4.19 onwards), you may want to add the property.
> 
> Suzuki
> 

Will add scatter-gather and post v3 soon for both SDM845 and MSM8996.

Thanks,
Sai
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 99b7495455a6..96a16d5a258c 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -429,6 +429,453 @@ 
 			reg = <0x300000 0x90000>;
 		};
 
+		stm@3002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x3002000 0x1000>,
+			      <0x8280000 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint =
+						  <&funnel0_in>;
+					};
+				};
+			};
+		};
+
+		tpiu@3020000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x3020000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@3021000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x3021000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					funnel0_in: endpoint {
+						remote-endpoint =
+						  <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@3022000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x3022000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					funnel1_in: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@3025000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x3025000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator@3026000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x3026000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint =
+						  <&etf_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint =
+						  <&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint =
+						  <&tpiu_in>;
+					};
+				};
+			};
+		};
+
+		etf@3027000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x3027000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint =
+						  <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etr@3028000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x3028000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		/*
+		 * On msm8996, we bypass the normal AMBA bus discovery
+		 * method by forcing the peripheral ID because of the wrong
+		 * value read from PID registers.
+		 */
+
+		debug@3810000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			arm,primecell-periphid = <0x000bbd03>;
+			reg = <0x3810000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+		};
+
+		etm@3840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			arm,primecell-periphid = <0x000bb95d>;
+			reg = <0x3840000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel0_in0>;
+					};
+				};
+			};
+		};
+
+		debug@3910000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			arm,primecell-periphid = <0x000bbd03>;
+			reg = <0x3910000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+		};
+
+		etm@3940000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			arm,primecell-periphid = <0x000bb95d>;
+			reg = <0x3940000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel0_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@39b0000 { /* APSS Funnel 0 */
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x39b0000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel0_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel0_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel0_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		debug@3a10000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			arm,primecell-periphid = <0x000bbd03>;
+			reg = <0x3a10000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+		};
+
+		etm@3a40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			arm,primecell-periphid = <0x000bb95d>;
+			reg = <0x3a40000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		debug@3b10000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			arm,primecell-periphid = <0x000bbd03>;
+			reg = <0x3b10000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+		};
+
+		etm@3b40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			arm,primecell-periphid = <0x000bb95d>;
+			reg = <0x3b40000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel1_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@3bb0000 { /* APSS Funnel 1 */
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x3bb0000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel1_in0: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel1_in1: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel1_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@3bc0000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x3bc0000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&apss_funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_merge_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&apss_funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&funnel1_in>;
+					};
+				};
+			};
+		};
+
 		kryocc: clock-controller@6400000 {
 			compatible = "qcom,apcc-msm8996";
 			reg = <0x6400000 0x90000>;