similarity index 86%
rename from Documentation/perf/arm-ccn.txt
rename to Documentation/perf/arm-ccn.rst
@@ -1,3 +1,4 @@
+==========================
ARM Cache Coherent Network
==========================
@@ -29,6 +30,7 @@ Crosspoint watchpoint-based events (special "event" value 0xfe)
require "xp" and "vc" as as above plus "port" (device port index),
"dir" (transmit/receive direction), comparator values ("cmp_l"
and "cmp_h") and "mask", being index of the comparator mask.
+
Masks are defined separately from the event description
(due to limited number of the config values) in the "cmp_mask"
directory, with first 8 configurable by user and additional
@@ -44,16 +46,16 @@ request the events on this processor (if not, the perf_event->cpu value
will be overwritten anyway). In case of this processor being offlined,
the events are migrated to another one and the attribute is updated.
-Example of perf tool use:
+Example of perf tool use::
-/ # perf list | grep ccn
- ccn/cycles/ [Kernel PMU event]
-<...>
- ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/ [Kernel PMU event]
-<...>
+ / # perf list | grep ccn
+ ccn/cycles/ [Kernel PMU event]
+ <...>
+ ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/ [Kernel PMU event]
+ <...>
-/ # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
- sleep 1
+ / # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+ sleep 1
The driver does not support sampling, therefore "perf record" will
not work. Per-task (without "-a") perf sessions are not supported.
similarity index 92%
rename from Documentation/perf/arm_dsu_pmu.txt
rename to Documentation/perf/arm_dsu_pmu.rst
@@ -1,3 +1,4 @@
+==================================
ARM DynamIQ Shared Unit (DSU) PMU
==================================
@@ -13,7 +14,7 @@ PMU doesn't support process specific events and cannot be used in sampling mode.
The DSU provides a bitmap for a subset of implemented events via hardware
registers. There is no way for the driver to determine if the other events
are available or not. Hence the driver exposes only those events advertised
-by the DSU, in "events" directory under :
+by the DSU, in "events" directory under::
/sys/bus/event_sources/devices/arm_dsu_<N>/
@@ -23,6 +24,6 @@ and use the raw event code for the unlisted events.
The driver also exposes the CPUs connected to the DSU instance in "associated_cpus".
-e.g usage :
+e.g usage::
perf stat -a -e arm_dsu_0/cycles/
similarity index 73%
rename from Documentation/perf/hisi-pmu.txt
rename to Documentation/perf/hisi-pmu.rst
@@ -1,5 +1,7 @@
+======================================================
HiSilicon SoC uncore Performance Monitoring Unit (PMU)
======================================================
+
The HiSilicon SoC chip includes various independent system device PMUs
such as L3 cache (L3C), Hydra Home Agent (HHA) and DDRC. These PMUs are
independent and have hardware logic to gather statistics and performance
@@ -11,11 +13,13 @@ called Super CPU cluster (SCCL) and is made up of 6 CCLs. Each SCCL has
two HHAs (0 - 1) and four DDRCs (0 - 3), respectively.
HiSilicon SoC uncore PMU driver
----------------------------------------
+-------------------------------
+
Each device PMU has separate registers for event counting, control and
interrupt, and the PMU driver shall register perf PMU drivers like L3C,
HHA and DDRC etc. The available events and configuration options shall
-be described in the sysfs, see :
+be described in the sysfs, see:
+
/sys/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>/, or
/sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>.
The "perf list" command shall list the available events from sysfs.
@@ -24,27 +28,30 @@ Each L3C, HHA and DDRC is registered as a separate PMU with perf. The PMU
name will appear in event listing as hisi_sccl<sccl-id>_module<index-id>.
where "sccl-id" is the identifier of the SCCL and "index-id" is the index of
module.
+
e.g. hisi_sccl3_l3c0/rd_hit_cpipe is READ_HIT_CPIPE event of L3C index #0 in
SCCL ID #3.
+
e.g. hisi_sccl1_hha0/rx_operations is RX_OPERATIONS event of HHA index #0 in
SCCL ID #1.
The driver also provides a "cpumask" sysfs attribute, which shows the CPU core
ID used to count the uncore PMU event.
-Example usage of perf:
-$# perf list
-hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event]
-------------------------------------------
+Example usage of perf::
-$# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5
-$# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5
+ $# perf list
+ hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event]
+ ------------------------------------------
+ hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event]
+ ------------------------------------------
+ hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event]
+ ------------------------------------------
+ hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event]
+ ------------------------------------------
+
+ $# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5
+ $# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5
The current driver does not support sampling. So "perf record" is unsupported.
Also attach to a task is unsupported as the events are all uncore.
new file mode 100644
@@ -0,0 +1,16 @@
+:orphan:
+
+===========================
+Performance monitor support
+===========================
+
+.. toctree::
+ :maxdepth: 1
+
+ hisi-pmu
+ qcom_l2_pmu
+ qcom_l3_pmu
+ arm-ccn
+ xgene-pmu
+ arm_dsu_pmu
+ thunderx2-pmu
similarity index 94%
rename from Documentation/perf/qcom_l2_pmu.txt
rename to Documentation/perf/qcom_l2_pmu.rst
@@ -1,3 +1,4 @@
+=====================================================================
Qualcomm Technologies Level-2 Cache Performance Monitoring Unit (PMU)
=====================================================================
@@ -28,7 +29,7 @@ The driver provides a "cpumask" sysfs attribute which contains a mask
consisting of one CPU per cluster which will be used to handle all the PMU
events on that cluster.
-Examples for use with perf:
+Examples for use with perf::
perf stat -e l2cache_0/config=0x001/,l2cache_0/config=0x042/ -a sleep 1
similarity index 93%
rename from Documentation/perf/qcom_l3_pmu.txt
rename to Documentation/perf/qcom_l3_pmu.rst
@@ -1,3 +1,4 @@
+===========================================================================
Qualcomm Datacenter Technologies L3 Cache Performance Monitoring Unit (PMU)
===========================================================================
@@ -17,7 +18,7 @@ The hardware implements 32bit event counters and has a flat 8bit event space
exposed via the "event" format attribute. In addition to the 32bit physical
counters the driver supports virtual 64bit hardware counters by using hardware
counter chaining. This feature is exposed via the "lc" (long counter) format
-flag. E.g.:
+flag. E.g.::
perf stat -e l3cache_0_0/read-miss,lc/
similarity index 73%
rename from Documentation/perf/thunderx2-pmu.txt
rename to Documentation/perf/thunderx2-pmu.rst
@@ -1,3 +1,4 @@
+=============================================================
Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
=============================================================
@@ -24,18 +25,18 @@ and configuration options under sysfs, see
The driver does not support sampling, therefore "perf record" will not
work. Per-task perf sessions are also not supported.
-Examples:
+Examples::
-# perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
+ # perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
-# perf stat -a -e \
-uncore_dmc_0/cnt_cycles/,\
-uncore_dmc_0/data_transfers/,\
-uncore_dmc_0/read_txns/,\
-uncore_dmc_0/write_txns/ sleep 1
+ # perf stat -a -e \
+ uncore_dmc_0/cnt_cycles/,\
+ uncore_dmc_0/data_transfers/,\
+ uncore_dmc_0/read_txns/,\
+ uncore_dmc_0/write_txns/ sleep 1
-# perf stat -a -e \
-uncore_l3c_0/read_request/,\
-uncore_l3c_0/read_hit/,\
-uncore_l3c_0/inv_request/,\
-uncore_l3c_0/inv_hit/ sleep 1
+ # perf stat -a -e \
+ uncore_l3c_0/read_request/,\
+ uncore_l3c_0/read_hit/,\
+ uncore_l3c_0/inv_request/,\
+ uncore_l3c_0/inv_hit/ sleep 1
similarity index 96%
rename from Documentation/perf/xgene-pmu.txt
rename to Documentation/perf/xgene-pmu.rst
@@ -1,3 +1,4 @@
+================================================
APM X-Gene SoC Performance Monitoring Unit (PMU)
================================================
@@ -33,7 +34,7 @@ each PMU, please refer to APM X-Gene User Manual.
Each perf driver also provides a "cpumask" sysfs attribute, which contains a
single CPU ID of the processor which will be used to handle all the PMU events.
-Example for perf tool use:
+Example for perf tool use::
/ # perf list | grep -e l3c -e iob -e mcb -e mc
l3c0/ackq-full/ [Kernel PMU event]
@@ -1139,7 +1139,7 @@ APPLIED MICRO (APM) X-GENE SOC PMU
M: Khuong Dinh <khuong@os.amperecomputing.com>
S: Supported
F: drivers/perf/xgene_pmu.c
-F: Documentation/perf/xgene-pmu.txt
+F: Documentation/perf/xgene-pmu.rst
F: Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
APTINA CAMERA SENSOR PLL
@@ -7180,7 +7180,7 @@ M: Shaokun Zhang <zhangshaokun@hisilicon.com>
W: http://www.hisilicon.com
S: Supported
F: drivers/perf/hisilicon
-F: Documentation/perf/hisi-pmu.txt
+F: Documentation/perf/hisi-pmu.rst
HISILICON ROCE DRIVER
M: Lijun Ou <oulijun@huawei.com>
@@ -8,7 +8,7 @@
* the slices. User space needs to aggregate to individual counts to provide
* a global picture.
*
- * See Documentation/perf/qcom_l3_pmu.txt for more details.
+ * See Documentation/perf/qcom_l3_pmu.rst for more details.
*
* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
*/
Rename the perf documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> --- .../perf/{arm-ccn.txt => arm-ccn.rst} | 18 +++++----- .../perf/{arm_dsu_pmu.txt => arm_dsu_pmu.rst} | 5 +-- .../perf/{hisi-pmu.txt => hisi-pmu.rst} | 35 +++++++++++-------- Documentation/perf/index.rst | 16 +++++++++ .../perf/{qcom_l2_pmu.txt => qcom_l2_pmu.rst} | 3 +- .../perf/{qcom_l3_pmu.txt => qcom_l3_pmu.rst} | 3 +- .../{thunderx2-pmu.txt => thunderx2-pmu.rst} | 25 ++++++------- .../perf/{xgene-pmu.txt => xgene-pmu.rst} | 3 +- MAINTAINERS | 4 +-- drivers/perf/qcom_l3_pmu.c | 2 +- 10 files changed, 72 insertions(+), 42 deletions(-) rename Documentation/perf/{arm-ccn.txt => arm-ccn.rst} (86%) rename Documentation/perf/{arm_dsu_pmu.txt => arm_dsu_pmu.rst} (92%) rename Documentation/perf/{hisi-pmu.txt => hisi-pmu.rst} (73%) create mode 100644 Documentation/perf/index.rst rename Documentation/perf/{qcom_l2_pmu.txt => qcom_l2_pmu.rst} (94%) rename Documentation/perf/{qcom_l3_pmu.txt => qcom_l3_pmu.rst} (93%) rename Documentation/perf/{thunderx2-pmu.txt => thunderx2-pmu.rst} (73%) rename Documentation/perf/{xgene-pmu.txt => xgene-pmu.rst} (96%)