diff mbox series

[v6,05/15] arm: dts: msm8974: thermal: Add thermal zones for each sensor

Message ID 72cc755c16888976edea555f1df60a299daa8a1e.1571652874.git.amit.kucheria@linaro.org (mailing list archive)
State Superseded
Headers show
Series thermal: qcom: tsens: Add interrupt support | expand

Commit Message

Amit Kucheria Oct. 21, 2019, 10:35 a.m. UTC
msm8974 has 11 sensors connected to a single TSENS IP. Define a thermal
zone for each of those sensors to expose the temperature of each zone.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 90 +++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

Comments

Andy Gross Oct. 27, 2019, 5:12 a.m. UTC | #1
On Mon, Oct 21, 2019 at 04:05:24PM +0530, Amit Kucheria wrote:
> msm8974 has 11 sensors connected to a single TSENS IP. Define a thermal
> zone for each of those sensors to expose the temperature of each zone.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Tested-by: Brian Masney <masneyb@onstation.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Applied for 5.5

Andy
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 369e58f64145d..33c534370fd5c 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -217,6 +217,96 @@ 
 				};
 			};
 		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				modemtx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-top {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-bottom {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
 	};
 
 	cpu-pmu {