diff mbox series

[V15,1/7] dt-bindings: Added the yaml bindings for DCC

Message ID 9448dfc974cac4f223982afaf89f65d697a93a7e.1664557657.git.quic_schowdhu@quicinc.com (mailing list archive)
State Superseded
Headers show
Series soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC) | expand

Commit Message

Souradeep Chowdhury Oct. 3, 2022, 9:04 a.m. UTC
Documentation for Data Capture and Compare(DCC) device tree bindings
in yaml format.

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
---
 .../devicetree/bindings/soc/qcom/qcom,dcc.yaml     | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml

Comments

Rob Herring Oct. 3, 2022, 1:24 p.m. UTC | #1
On Mon, 03 Oct 2022 14:34:07 +0530, Souradeep Chowdhury wrote:
> Documentation for Data Capture and Compare(DCC) device tree bindings
> in yaml format.
> 
> Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> ---
>  .../devicetree/bindings/soc/qcom/qcom,dcc.yaml     | 44 ++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
new file mode 100644
index 0000000..3decc02
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
@@ -0,0 +1,44 @@ 
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/msm/qcom,dcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Data Capture and Compare
+
+maintainers:
+  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description: |
+    DCC (Data Capture and Compare) is a DMA engine which is used to save
+    configuration data or system memory contents during catastrophic failure
+    or SW trigger. DCC is used to capture and store data for debugging purpose
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sm8150-dcc
+          - qcom,sc7280-dcc
+          - qcom,sc7180-dcc
+          - qcom,sdm845-dcc
+      - const: qcom,dcc
+
+  reg:
+    items:
+      - description: DCC base register region
+      - description: DCC RAM base register region
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma@10a2000{
+        compatible = "qcom,sm8150-dcc","qcom,dcc";
+        reg = <0x010a2000 0x1000>,
+              <0x010ad000 0x2000>;
+    };