diff mbox series

[RESEND] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add audio support

Message ID BN6PR2001MB17963B035BEFCBC740FEB6A9D9759@BN6PR2001MB1796.namprd20.prod.outlook.com (mailing list archive)
State Superseded
Headers show
Series [RESEND] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add audio support | expand

Commit Message

Joel Selvaraj April 7, 2021, 8:07 p.m. UTC 
This patch adds audio support for Xiaomi Poco F1 phone. Phone's primary
Mic and 3.5mm Headphone jack are handled through the SDM845 sound card
and WCD9340 codec.

Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
---
 .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 117 ++++++++++++++++++
 1 file changed, 117 insertions(+)

Comments

Stephan Gerhold April 7, 2021, 8:13 p.m. UTC | #1 
On Thu, Apr 08, 2021 at 01:37:53AM +0530, Joel Selvaraj wrote:
> This patch adds audio support for Xiaomi Poco F1 phone. Phone's primary
> Mic and 3.5mm Headphone jack are handled through the SDM845 sound card
> and WCD9340 codec.
> 
> Tested-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
> ---
>  .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 117 ++++++++++++++++++
>  1 file changed, 117 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> index 86cbae63eaf7..5b5786595cdb 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> [...]
> @@ -257,6 +281,73 @@ &sdhc_2 {
>  	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
>  };
>  
> +&sound {
> +	compatible = "qcom,db845c-sndcard";
> +	pinctrl-0 = <&quat_mi2s_active
> +			&quat_mi2s_sd0_active>;
> +	pinctrl-names = "default";
> +	model = "Xiaomi Poco F1";
> +	audio-routing =
> +		"RX_BIAS", "MCLK",
> +		"AMIC1", "MIC BIAS1",
> +		"AMIC2", "MIC BIAS2",
> +		"AMIC3", "MIC BIAS3",
> +		"MM_DL1",  "MultiMedia1 Playback",
> +		"MM_DL2",  "MultiMedia2 Playback",
> +		"MultiMedia3 Capture", "MM_UL3";
> +

FYI, the MM_DL/MM_UL audio routes should not be necessary anymore since
commit 6fd8d2d275f7 ("ASoC: qcom: qdsp6: Move frontend AIFs to q6asm-dai")
(part of Linux 5.12). Can you try if everything still works without them?

Thanks,
Stephan
Srinivas Kandagatla April 12, 2021, 9:32 a.m. UTC | #2 
On 07/04/2021 21:07, Joel Selvaraj wrote:
> This patch adds audio support for Xiaomi Poco F1 phone. Phone's primary
> Mic and 3.5mm Headphone jack are handled through the SDM845 sound card
> and WCD9340 codec.
> 
> Tested-by: Amit Pundir <amit.pundir@linaro.org>
> Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
> ---
>   .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 117 ++++++++++++++++++
>   1 file changed, 117 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> index 86cbae63eaf7..5b5786595cdb 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> @@ -5,6 +5,8 @@
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>   #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/sound/qcom,q6afe.h>
> +#include <dt-bindings/sound/qcom,q6asm.h>
>   #include "sdm845.dtsi"
>   #include "pm8998.dtsi"
>   #include "pmi8998.dtsi"
> @@ -240,6 +242,28 @@ resin {
>   	};
>   };
>   
> +/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
> +&q6afedai {
> +	qi2s@22 {
> +		reg = <22>;
> +		qcom,sd-lines = <0>;
> +	};
> +};
> +
> +&q6asmdai {
> +	dai@0 {
> +		reg = <0>;
> +	};
> +
> +	dai@1 {
> +		reg = <1>;
> +	};
> +
> +	dai@2 {
> +		reg = <2>;
> +	};
> +};
> +
>   &qupv3_id_0 {
>   	status = "okay";
>   };
> @@ -257,6 +281,73 @@ &sdhc_2 {
>   	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
>   };
>   
> +&sound {
> +	compatible = "qcom,db845c-sndcard";
> +	pinctrl-0 = <&quat_mi2s_active
> +			&quat_mi2s_sd0_active>;
> +	pinctrl-names = "default";
> +	model = "Xiaomi Poco F1";
> +	audio-routing =
> +		"RX_BIAS", "MCLK",
> +		"AMIC1", "MIC BIAS1",
> +		"AMIC2", "MIC BIAS2",
> +		"AMIC3", "MIC BIAS3",
> +		"MM_DL1",  "MultiMedia1 Playback",
> +		"MM_DL2",  "MultiMedia2 Playback",
> +		"MultiMedia3 Capture", "MM_UL3";

Overall the patch LGTM,

As Stephan Gerhold said these three lines are redundant.
Once removed, you could add

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>


--srini

> +
> +	mm1-dai-link {
> +		link-name = "MultiMedia1";
> +		cpu {
> +			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
> +		};
> +	};
> +
> +	mm2-dai-link {
> +		link-name = "MultiMedia2";
> +		cpu {
> +			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
> +		};
> +	};
> +
> +	mm3-dai-link {
> +		link-name = "MultiMedia3";
> +		cpu {
> +			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
> +		};
> +	};
> +
> +	slim-dai-link {
> +		link-name = "SLIM Playback";
> +		cpu {
> +			sound-dai = <&q6afedai SLIMBUS_0_RX>;
> +		};
> +
> +		platform {
> +			sound-dai = <&q6routing>;
> +		};
> +
> +		codec {
> +			sound-dai =  <&wcd9340 0>;
> +		};
> +	};
> +
> +	slimcap-dai-link {
> +		link-name = "SLIM Capture";
> +		cpu {
> +			sound-dai = <&q6afedai SLIMBUS_0_TX>;
> +		};
> +
> +		platform {
> +			sound-dai = <&q6routing>;
> +		};
> +
> +		codec {
> +			sound-dai = <&wcd9340 1>;
> +		};
> +	};
> +};
> +
>   &tlmm {
>   	gpio-reserved-ranges = <0 4>, <81 4>;
>   
> @@ -285,6 +376,15 @@ sdc2_card_det_n: sd-card-det-n {
>   		function = "gpio";
>   		bias-pull-up;
>   	};
> +
> +	wcd_intr_default: wcd_intr_default {
> +		pins = <54>;
> +		function = "gpio";
> +
> +		input-enable;
> +		bias-pull-down;
> +		drive-strength = <2>;
> +	};
>   };
>   
>   &uart6 {
> @@ -345,6 +445,23 @@ &usb_1_qmpphy {
>   	vdda-pll-supply = <&vreg_l1a_0p875>;
>   };
>   
> +&wcd9340{
> +	pinctrl-0 = <&wcd_intr_default>;
> +	pinctrl-names = "default";
> +	clock-names = "extclk";
> +	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
> +	reset-gpios = <&tlmm 64 0>;
> +	vdd-buck-supply = <&vreg_s4a_1p8>;
> +	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
> +	vdd-tx-supply = <&vreg_s4a_1p8>;
> +	vdd-rx-supply = <&vreg_s4a_1p8>;
> +	vdd-io-supply = <&vreg_s4a_1p8>;
> +	qcom,micbias1-microvolt = <2700000>;
> +	qcom,micbias2-microvolt = <1800000>;
> +	qcom,micbias3-microvolt = <2700000>;
> +	qcom,micbias4-microvolt = <2700000>;
> +};
> +
>   &wifi {
>   	status = "okay";
>   
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index 86cbae63eaf7..5b5786595cdb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -5,6 +5,8 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
@@ -240,6 +242,28 @@  resin {
 	};
 };
 
+/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
+&q6afedai {
+	qi2s@22 {
+		reg = <22>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -257,6 +281,73 @@  &sdhc_2 {
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
 };
 
+&sound {
+	compatible = "qcom,db845c-sndcard";
+	pinctrl-0 = <&quat_mi2s_active
+			&quat_mi2s_sd0_active>;
+	pinctrl-names = "default";
+	model = "Xiaomi Poco F1";
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"AMIC3", "MIC BIAS3",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
@@ -285,6 +376,15 @@  sdc2_card_det_n: sd-card-det-n {
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	wcd_intr_default: wcd_intr_default {
+		pins = <54>;
+		function = "gpio";
+
+		input-enable;
+		bias-pull-down;
+		drive-strength = <2>;
+	};
 };
 
 &uart6 {
@@ -345,6 +445,23 @@  &usb_1_qmpphy {
 	vdda-pll-supply = <&vreg_l1a_0p875>;
 };
 
+&wcd9340{
+	pinctrl-0 = <&wcd_intr_default>;
+	pinctrl-names = "default";
+	clock-names = "extclk";
+	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+	reset-gpios = <&tlmm 64 0>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <2700000>;
+	qcom,micbias2-microvolt = <1800000>;
+	qcom,micbias3-microvolt = <2700000>;
+	qcom,micbias4-microvolt = <2700000>;
+};
+
 &wifi {
 	status = "okay";