diff mbox series

[2/4] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom ipa driver

Message ID BY5PR02MB7009405D7C06C0B480974063D91F9@BY5PR02MB7009.namprd02.prod.outlook.com (mailing list archive)
State Accepted
Headers show
Series arm64: dts: qcom: updates for Xiaomi Poco F1 | expand

Commit Message

Joel Selvaraj March 30, 2022, 6:45 a.m. UTC 
Enable Qualcomm IP Accelerator (IPA) driver for mobile data functionality
which works by using ModemManager.

Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
---
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Caleb Connolly March 30, 2022, 5:52 p.m. UTC | #1 
On 30/03/2022 07:45, Joel Selvaraj wrote:
> Enable Qualcomm IP Accelerator (IPA) driver for mobile data functionality
> which works by using ModemManager.
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
>
> Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
> ---
>   arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 6 ++++++
>   1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> index 27ba9ad1ad02..801b8c5984a3 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> @@ -292,6 +292,12 @@ &mss_pil {
>   	firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn";
>   };
>
> +&ipa {
> +	status = "okay";
> +	memory-region = <&ipa_fw_mem>;
> +	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
> +};
> +
>   &pm8998_gpio {
>   	vol_up_pin_a: vol-up-active {
>   		pins = "gpio6";
> --
> 2.35.1
>

--
Kind Regards,
Caleb
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index 27ba9ad1ad02..801b8c5984a3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -292,6 +292,12 @@  &mss_pil {
 	firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn";
 };
 
+&ipa {
+	status = "okay";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
+};
+
 &pm8998_gpio {
 	vol_up_pin_a: vol-up-active {
 		pins = "gpio6";