diff mbox series

[V2] bus: mhi: host: pci_generic: Add support for Netprisma LCUR57 and FCUN69

Message ID LV3PR22MB5104E2E4AD0A22D1B8FD2AAAB0F92@LV3PR22MB5104.namprd22.prod.outlook.com (mailing list archive)
State Not Applicable
Headers show
Series [V2] bus: mhi: host: pci_generic: Add support for Netprisma LCUR57 and FCUN69 | expand

Commit Message

mank June 5, 2024, 7:01 a.m. UTC
Add Netprisma LCUR57 and FCUN69 hardware revision:

LCUR57:
02:00.0 Unassigned class [ff00]: Device 203e:1000
	Subsystem: Device 203e:1000

FCUN69:
02:00.0 Unassigned class [ff00]: Device 203e:1001
	Subsystem: Device 203e:1001

---
V1 -> V2:
1.Change 0x203E to 0x203e
2.Remove redundant code and use existing config:modem_quectel_em1xx_config

Signed-off-by: Mank Wang <mank@netprisma.us>
---
 drivers/bus/mhi/host/pci_generic.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

Comments

Manivannan Sadhasivam June 5, 2024, 7:16 a.m. UTC | #1
On Wed, Jun 05, 2024 at 07:01:17AM +0000, mank wrote:
> Add Netprisma LCUR57 and FCUN69 hardware revision:
> 
> LCUR57:
> 02:00.0 Unassigned class [ff00]: Device 203e:1000
> 	Subsystem: Device 203e:1000
> 
> FCUN69:
> 02:00.0 Unassigned class [ff00]: Device 203e:1001
> 	Subsystem: Device 203e:1001
> 
> ---
> V1 -> V2:
> 1.Change 0x203E to 0x203e
> 2.Remove redundant code and use existing config:modem_quectel_em1xx_config
> 
> Signed-off-by: Mank Wang <mank@netprisma.us>
> ---
>  drivers/bus/mhi/host/pci_generic.c | 29 +++++++++++++++++++++++++++++

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

>  1 file changed, 29 insertions(+)
> 
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index 08844ee79654..21c1d750274c 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -26,6 +26,7 @@
>  /* PCI VID definitions */
>  #define PCI_VENDOR_ID_THALES	0x1269
>  #define PCI_VENDOR_ID_QUECTEL	0x1eac
> +#define PCI_VENDOR_ID_NETPRISMA	0x203e
>  
>  #define MHI_EDL_DB			91
>  #define MHI_EDL_COOKIE			0xEDEDEDED
> @@ -606,6 +607,28 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = {
>  	.mru_default = 32768,
>  };
>  
> +static const struct mhi_pci_dev_info mhi_netprisma_lcur57_info = {
> +	.name = "netprisma-lcur57",
> +	.edl = "qcom/prog_firehose_sdx24.mbn",
> +	/* LCUR57 uses the same controller configuration as quectel_em1xx */
> +	.config = &modem_quectel_em1xx_config,
> +	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> +	.dma_data_width = 32,
> +	.mru_default = 32768,
> +	.sideband_wake = true,
> +};
> +
> +static const struct mhi_pci_dev_info mhi_netprisma_fcun69_info = {
> +	.name = "netprisma-fcun69",
> +	.edl = "qcom/prog_firehose_sdx6x.elf",
> +	/* FCUN69 uses the same controller configuration as quectel_em1xx */
> +	.config = &modem_quectel_em1xx_config,
> +	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> +	.dma_data_width = 32,
> +	.mru_default = 32768,
> +	.sideband_wake = true,
> +};
> +
>  /* Keep the list sorted based on the PID. New VID should be added as the last entry */
>  static const struct pci_device_id mhi_pci_id_table[] = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
> @@ -695,6 +718,12 @@ static const struct pci_device_id mhi_pci_id_table[] = {
>  	/* T99W175 (sdx55), HP variant */
>  	{ PCI_DEVICE(0x03f0, 0x0a6c),
>  		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
> +	/* NETPRISMA LCUR57 (SDX24) */
> +	{ PCI_DEVICE(PCI_VENDOR_ID_NETPRISMA, 0x1000),
> +		.driver_data = (kernel_ulong_t) &mhi_netprisma_lcur57_info },
> +	/* NETPRISMA FCUN69 (SDX6X) */
> +	{ PCI_DEVICE(PCI_VENDOR_ID_NETPRISMA, 0x1001),
> +		.driver_data = (kernel_ulong_t) &mhi_netprisma_fcun69_info },
>  	{  }
>  };
>  MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 08844ee79654..21c1d750274c 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -26,6 +26,7 @@ 
 /* PCI VID definitions */
 #define PCI_VENDOR_ID_THALES	0x1269
 #define PCI_VENDOR_ID_QUECTEL	0x1eac
+#define PCI_VENDOR_ID_NETPRISMA	0x203e
 
 #define MHI_EDL_DB			91
 #define MHI_EDL_COOKIE			0xEDEDEDED
@@ -606,6 +607,28 @@  static const struct mhi_pci_dev_info mhi_telit_fn990_info = {
 	.mru_default = 32768,
 };
 
+static const struct mhi_pci_dev_info mhi_netprisma_lcur57_info = {
+	.name = "netprisma-lcur57",
+	.edl = "qcom/prog_firehose_sdx24.mbn",
+	/* LCUR57 uses the same controller configuration as quectel_em1xx */
+	.config = &modem_quectel_em1xx_config,
+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+	.dma_data_width = 32,
+	.mru_default = 32768,
+	.sideband_wake = true,
+};
+
+static const struct mhi_pci_dev_info mhi_netprisma_fcun69_info = {
+	.name = "netprisma-fcun69",
+	.edl = "qcom/prog_firehose_sdx6x.elf",
+	/* FCUN69 uses the same controller configuration as quectel_em1xx */
+	.config = &modem_quectel_em1xx_config,
+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+	.dma_data_width = 32,
+	.mru_default = 32768,
+	.sideband_wake = true,
+};
+
 /* Keep the list sorted based on the PID. New VID should be added as the last entry */
 static const struct pci_device_id mhi_pci_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
@@ -695,6 +718,12 @@  static const struct pci_device_id mhi_pci_id_table[] = {
 	/* T99W175 (sdx55), HP variant */
 	{ PCI_DEVICE(0x03f0, 0x0a6c),
 		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
+	/* NETPRISMA LCUR57 (SDX24) */
+	{ PCI_DEVICE(PCI_VENDOR_ID_NETPRISMA, 0x1000),
+		.driver_data = (kernel_ulong_t) &mhi_netprisma_lcur57_info },
+	/* NETPRISMA FCUN69 (SDX6X) */
+	{ PCI_DEVICE(PCI_VENDOR_ID_NETPRISMA, 0x1001),
+		.driver_data = (kernel_ulong_t) &mhi_netprisma_fcun69_info },
 	{  }
 };
 MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);