diff mbox series

[2/2] arm64: dts: qcom: x1e80100-yoga: add wifi calibration variant

Message ID ZpV7OeGNIGGpqNC0@windev.fritz.box (mailing list archive)
State Accepted
Commit 8bc7cb73df8644423758c79d4504d501c8ef3854
Headers show
Series arm64: dts: qcom: x1e80100-yoga: add wifi calibration variant | expand

Commit Message

Patrick Wildt July 15, 2024, 7:40 p.m. UTC
Describe the bus topology for PCIe domain 4 and add the ath12k
calibration variant so that the board file (calibration data) can be
loaded.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
---
 .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts      |  9 +++++++++
 arch/arm64/boot/dts/qcom/x1e80100.dtsi                 | 10 ++++++++++
 2 files changed, 19 insertions(+)

Comments

Dmitry Baryshkov July 15, 2024, 9:51 p.m. UTC | #1
On Mon, Jul 15, 2024 at 09:40:41PM GMT, Patrick Wildt wrote:
> Describe the bus topology for PCIe domain 4 and add the ath12k
> calibration variant so that the board file (calibration data) can be
> loaded.
> 
> Signed-off-by: Patrick Wildt <patrick@blueri.se>
> ---
>  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts      |  9 +++++++++
>  arch/arm64/boot/dts/qcom/x1e80100.dtsi                 | 10 ++++++++++
>  2 files changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> index fbff558f5b07..f569f0fbd1fc 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> @@ -635,6 +635,15 @@ &pcie4_phy {
>  	status = "okay";
>  };
>  
> +&pcie4_port0 {
> +	wifi@0 {
> +		compatible = "pci17cb,1107";
> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +		qcom,ath12k-calibration-variant = "LES790";

It doesn't look like it follows the rest of the calibration variants.

Something like "Lenovo_Y7x" or "Lenovo_Yoga7x" sounds more logical.

> +	};
> +};
> +
>  &pcie6a {
>  	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
>  	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index 7bca5fcd7d52..70eeacd4f9ad 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -3085,6 +3085,16 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
>  			phy-names = "pciephy";
>  
>  			status = "disabled";
> +
> +			pcie4_port0: pcie@0 {
> +				device_type = "pci";
> +				reg = <0x0 0x0 0x0 0x0 0x0>;
> +				bus-range = <0x01 0xff>;
> +
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				ranges;
> +			};
>  		};
>  
>  		pcie4_phy: phy@1c0e000 {
> -- 
> 2.45.2
>
Patrick Wildt July 15, 2024, 10:01 p.m. UTC | #2
Am Tue, Jul 16, 2024 at 12:51:53AM +0300 schrieb Dmitry Baryshkov:
> On Mon, Jul 15, 2024 at 09:40:41PM GMT, Patrick Wildt wrote:
> > Describe the bus topology for PCIe domain 4 and add the ath12k
> > calibration variant so that the board file (calibration data) can be
> > loaded.
> > 
> > Signed-off-by: Patrick Wildt <patrick@blueri.se>
> > ---
> >  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts      |  9 +++++++++
> >  arch/arm64/boot/dts/qcom/x1e80100.dtsi                 | 10 ++++++++++
> >  2 files changed, 19 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > index fbff558f5b07..f569f0fbd1fc 100644
> > --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > @@ -635,6 +635,15 @@ &pcie4_phy {
> >  	status = "okay";
> >  };
> >  
> > +&pcie4_port0 {
> > +	wifi@0 {
> > +		compatible = "pci17cb,1107";
> > +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> > +
> > +		qcom,ath12k-calibration-variant = "LES790";
> 
> It doesn't look like it follows the rest of the calibration variants.
> 
> Something like "Lenovo_Y7x" or "Lenovo_Yoga7x" sounds more logical.

This is what's both in the DSDT

  Device (WLN)
  {
    [...]
    Name (BDFE, "BDF_LES790")

and kvalo's board-2.bin for this machine:

  $ strings board-2.bin | grep LES
  bus=pci,vendor=17cb,device=1107,subsystem-vendor=17aa,subsystem-device=e0e9,qmi-chip-id=2,qmi-board-id=255,variant=LES790

I don't think we can hand-pick these strings, they come from whoever
decided upon them and fed them into ACPI tables and QC's binaries.
Konrad Dybcio July 15, 2024, 11 p.m. UTC | #3
On 16.07.2024 12:01 AM, Patrick Wildt wrote:
> Am Tue, Jul 16, 2024 at 12:51:53AM +0300 schrieb Dmitry Baryshkov:
>> On Mon, Jul 15, 2024 at 09:40:41PM GMT, Patrick Wildt wrote:
>>> Describe the bus topology for PCIe domain 4 and add the ath12k
>>> calibration variant so that the board file (calibration data) can be
>>> loaded.
>>>
>>> Signed-off-by: Patrick Wildt <patrick@blueri.se>
>>> ---
>>>  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts      |  9 +++++++++
>>>  arch/arm64/boot/dts/qcom/x1e80100.dtsi                 | 10 ++++++++++
>>>  2 files changed, 19 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
>>> index fbff558f5b07..f569f0fbd1fc 100644
>>> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
>>> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
>>> @@ -635,6 +635,15 @@ &pcie4_phy {
>>>  	status = "okay";
>>>  };
>>>  
>>> +&pcie4_port0 {
>>> +	wifi@0 {
>>> +		compatible = "pci17cb,1107";
>>> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
>>> +
>>> +		qcom,ath12k-calibration-variant = "LES790";
>>
>> It doesn't look like it follows the rest of the calibration variants.
>>
>> Something like "Lenovo_Y7x" or "Lenovo_Yoga7x" sounds more logical.
> 
> This is what's both in the DSDT
> 
>   Device (WLN)
>   {
>     [...]
>     Name (BDFE, "BDF_LES790")
> 
> and kvalo's board-2.bin for this machine:
> 
>   $ strings board-2.bin | grep LES
>   bus=pci,vendor=17cb,device=1107,subsystem-vendor=17aa,subsystem-device=e0e9,qmi-chip-id=2,qmi-board-id=255,variant=LES790
> 
> I don't think we can hand-pick these strings, they come from whoever
> decided upon them and fed them into ACPI tables and QC's binaries.

Huh, great nod from qca!
Looks like there's even a bit more hw supported in there..

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Konrad Dybcio July 15, 2024, 11:02 p.m. UTC | #4
On 16.07.2024 1:00 AM, Konrad Dybcio wrote:
> On 16.07.2024 12:01 AM, Patrick Wildt wrote:
>> Am Tue, Jul 16, 2024 at 12:51:53AM +0300 schrieb Dmitry Baryshkov:
>>> On Mon, Jul 15, 2024 at 09:40:41PM GMT, Patrick Wildt wrote:
>>>> Describe the bus topology for PCIe domain 4 and add the ath12k
>>>> calibration variant so that the board file (calibration data) can be
>>>> loaded.
>>>>
>>>> Signed-off-by: Patrick Wildt <patrick@blueri.se>
>>>> ---
>>>>  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts      |  9 +++++++++
>>>>  arch/arm64/boot/dts/qcom/x1e80100.dtsi                 | 10 ++++++++++
>>>>  2 files changed, 19 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
>>>> index fbff558f5b07..f569f0fbd1fc 100644
>>>> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
>>>> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
>>>> @@ -635,6 +635,15 @@ &pcie4_phy {
>>>>  	status = "okay";
>>>>  };
>>>>  
>>>> +&pcie4_port0 {
>>>> +	wifi@0 {
>>>> +		compatible = "pci17cb,1107";
>>>> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
>>>> +
>>>> +		qcom,ath12k-calibration-variant = "LES790";
>>>
>>> It doesn't look like it follows the rest of the calibration variants.
>>>
>>> Something like "Lenovo_Y7x" or "Lenovo_Yoga7x" sounds more logical.
>>
>> This is what's both in the DSDT
>>
>>   Device (WLN)
>>   {
>>     [...]
>>     Name (BDFE, "BDF_LES790")
>>
>> and kvalo's board-2.bin for this machine:
>>
>>   $ strings board-2.bin | grep LES
>>   bus=pci,vendor=17cb,device=1107,subsystem-vendor=17aa,subsystem-device=e0e9,qmi-chip-id=2,qmi-board-id=255,variant=LES790
>>
>> I don't think we can hand-pick these strings, they come from whoever
>> decided upon them and fed them into ACPI tables and QC's binaries.
> 
> Huh, great nod from qca!
> Looks like there's even a bit more hw supported in there..
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Ref: https://git.codelinaro.org/clo/ath-firmware/ath12k-firmware/-/blob/main/WCN7850/hw2.0/board-2.bin

Konrad
Manivannan Sadhasivam July 16, 2024, 10:13 a.m. UTC | #5
On Mon, Jul 15, 2024 at 09:40:41PM +0200, Patrick Wildt wrote:
> Describe the bus topology for PCIe domain 4 and add the ath12k
> calibration variant so that the board file (calibration data) can be
> loaded.
> 
> Signed-off-by: Patrick Wildt <patrick@blueri.se>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts      |  9 +++++++++
>  arch/arm64/boot/dts/qcom/x1e80100.dtsi                 | 10 ++++++++++
>  2 files changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> index fbff558f5b07..f569f0fbd1fc 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> @@ -635,6 +635,15 @@ &pcie4_phy {
>  	status = "okay";
>  };
>  
> +&pcie4_port0 {
> +	wifi@0 {
> +		compatible = "pci17cb,1107";
> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +		qcom,ath12k-calibration-variant = "LES790";
> +	};
> +};
> +
>  &pcie6a {
>  	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
>  	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index 7bca5fcd7d52..70eeacd4f9ad 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -3085,6 +3085,16 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
>  			phy-names = "pciephy";
>  
>  			status = "disabled";
> +
> +			pcie4_port0: pcie@0 {
> +				device_type = "pci";
> +				reg = <0x0 0x0 0x0 0x0 0x0>;
> +				bus-range = <0x01 0xff>;
> +
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				ranges;
> +			};
>  		};
>  
>  		pcie4_phy: phy@1c0e000 {
> -- 
> 2.45.2
> 
>
Dmitry Baryshkov July 16, 2024, 11:12 a.m. UTC | #6
On Tue, Jul 16, 2024 at 12:01:28AM GMT, Patrick Wildt wrote:
> Am Tue, Jul 16, 2024 at 12:51:53AM +0300 schrieb Dmitry Baryshkov:
> > On Mon, Jul 15, 2024 at 09:40:41PM GMT, Patrick Wildt wrote:
> > > Describe the bus topology for PCIe domain 4 and add the ath12k
> > > calibration variant so that the board file (calibration data) can be
> > > loaded.
> > > 
> > > Signed-off-by: Patrick Wildt <patrick@blueri.se>
> > > ---
> > >  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts      |  9 +++++++++
> > >  arch/arm64/boot/dts/qcom/x1e80100.dtsi                 | 10 ++++++++++
> > >  2 files changed, 19 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > > index fbff558f5b07..f569f0fbd1fc 100644
> > > --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > > +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> > > @@ -635,6 +635,15 @@ &pcie4_phy {
> > >  	status = "okay";
> > >  };
> > >  
> > > +&pcie4_port0 {
> > > +	wifi@0 {
> > > +		compatible = "pci17cb,1107";
> > > +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> > > +
> > > +		qcom,ath12k-calibration-variant = "LES790";
> > 
> > It doesn't look like it follows the rest of the calibration variants.
> > 
> > Something like "Lenovo_Y7x" or "Lenovo_Yoga7x" sounds more logical.
> 
> This is what's both in the DSDT
> 
>   Device (WLN)
>   {
>     [...]
>     Name (BDFE, "BDF_LES790")
> 
> and kvalo's board-2.bin for this machine:
> 
>   $ strings board-2.bin | grep LES
>   bus=pci,vendor=17cb,device=1107,subsystem-vendor=17aa,subsystem-device=e0e9,qmi-chip-id=2,qmi-board-id=255,variant=LES790
> 
> I don't think we can hand-pick these strings, they come from whoever
> decided upon them and fed them into ACPI tables and QC's binaries.

Ack, if Kalle has already selected this string, we can't argue.


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index fbff558f5b07..f569f0fbd1fc 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -635,6 +635,15 @@  &pcie4_phy {
 	status = "okay";
 };
 
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		qcom,ath12k-calibration-variant = "LES790";
+	};
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 7bca5fcd7d52..70eeacd4f9ad 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -3085,6 +3085,16 @@  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie4_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie4_phy: phy@1c0e000 {