diff mbox series

[v6,12/15] arm: dts: msm8974: thermal: Add interrupt support

Message ID a2a70ff28e72a14b163a9a9b93ef474ab0836398.1571652874.git.amit.kucheria@linaro.org (mailing list archive)
State Superseded
Headers show
Series thermal: qcom: tsens: Add interrupt support | expand

Commit Message

Amit Kucheria Oct. 21, 2019, 10:35 a.m. UTC 
Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Brian Masney <masneyb@onstation.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 2 ++
 1 file changed, 2 insertions(+)

Comments

Andy Gross Oct. 27, 2019, 5:12 a.m. UTC | #1 
On Mon, Oct 21, 2019 at 04:05:31PM +0530, Amit Kucheria wrote:
> Register upper-lower interrupt for the tsens controller.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Tested-by: Brian Masney <masneyb@onstation.org>
> ---

Applied for 5.5.

Andy
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 33c534370fd5c..c1a3a7d7161cd 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -531,6 +531,8 @@ 
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};