| Message ID | a8610cc5e16b63cd716e466d8edae54d97f5ae57.1677022414.git.soyer@irl.hu (mailing list archive) |
|---|---|
| State | Awaiting Upstream |
| Headers | show |
| Series | Add alert-slider for OnePlus6 | expand |
On 22.02.2023 01:10, Gergo Koteles wrote: > The alert-slider is a tri-state sound profile switch found on the OnePlus 6, > Android maps the states to "silent", "vibrate" and "ring". Expose them as > ABS_SND_PROFILE events. > The previous GPIO numbers were wrong. Update them to the correct > ones. > > Co-developed-by: Caleb Connolly <caleb@connolly.tech> > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > Signed-off-by: Gergo Koteles <soyer@irl.hu> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 39 ++++++++++++++++++- > 1 file changed, 37 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi > index 64638ea94db7..7567f5cf6e3f 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi > @@ -20,6 +20,41 @@ > /delete-node/ &rmtfs_mem; > > / { > + alert-slider { > + compatible = "gpio-keys"; > + label = "Alert slider"; > + > + pinctrl-0 = <&alert_slider_default>; > + pinctrl-names = "default"; > + > + switch-top { > + label = "Silent"; > + linux,input-type = <EV_ABS>; > + linux,code = <ABS_SND_PROFILE>; > + linux,input-value = <SND_PROFILE_SILENT>; > + gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; > + linux,can-disable; > + }; > + > + switch-middle { > + label = "Vibrate"; > + linux,input-type = <EV_ABS>; > + linux,code = <ABS_SND_PROFILE>; > + linux,input-value = <SND_PROFILE_VIBRATE>; > + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; > + linux,can-disable; > + }; > + > + switch-bottom { > + label = "Ring"; > + linux,input-type = <EV_ABS>; > + linux,code = <ABS_SND_PROFILE>; > + linux,input-value = <SND_PROFILE_RING>; > + gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; > + linux,can-disable; > + }; > + }; > + > aliases { > serial0 = &uart9; > serial1 = &uart6; > @@ -753,8 +788,8 @@ &usb_1_hsphy { > &tlmm { > gpio-reserved-ranges = <0 4>, <81 4>; > > - tri_state_key_default: tri-state-key-default-state { > - pins = "gpio40", "gpio42", "gpio26"; > + alert_slider_default: alert-slider-default-state { > + pins = "gpio126", "gpio52", "gpio24"; > function = "gpio"; > drive-strength = <2>; > bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 64638ea94db7..7567f5cf6e3f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -20,6 +20,41 @@ /delete-node/ &rmtfs_mem; / { + alert-slider { + compatible = "gpio-keys"; + label = "Alert slider"; + + pinctrl-0 = <&alert_slider_default>; + pinctrl-names = "default"; + + switch-top { + label = "Silent"; + linux,input-type = <EV_ABS>; + linux,code = <ABS_SND_PROFILE>; + linux,input-value = <SND_PROFILE_SILENT>; + gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + linux,can-disable; + }; + + switch-middle { + label = "Vibrate"; + linux,input-type = <EV_ABS>; + linux,code = <ABS_SND_PROFILE>; + linux,input-value = <SND_PROFILE_VIBRATE>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; + linux,can-disable; + }; + + switch-bottom { + label = "Ring"; + linux,input-type = <EV_ABS>; + linux,code = <ABS_SND_PROFILE>; + linux,input-value = <SND_PROFILE_RING>; + gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + linux,can-disable; + }; + }; + aliases { serial0 = &uart9; serial1 = &uart6; @@ -753,8 +788,8 @@ &usb_1_hsphy { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - tri_state_key_default: tri-state-key-default-state { - pins = "gpio40", "gpio42", "gpio26"; + alert_slider_default: alert-slider-default-state { + pins = "gpio126", "gpio52", "gpio24"; function = "gpio"; drive-strength = <2>; bias-disable;