diff mbox series

[v3,2/3] dt-bindings: thermal: tsens: Add qcom,tsens-v0_1 to msm8916.dtsi compatible

Message ID ab6a982bd9bcbc76262cd9ca5dd6ea10cf45b8a1.1582705101.git.amit.kucheria@linaro.org (mailing list archive)
State Superseded
Headers show
Series Cleanup dtbs_check warnings for tsens | expand

Commit Message

Amit Kucheria Feb. 26, 2020, 9:31 a.m. UTC
The qcom-tsens binding requires a SoC-specific and a TSENS
family-specific binding to be specified in the compatible string.

Since them family-specific binding is not listed in the .dtsi file, we
see the following warnings in 'make dtbs_check'. Fix them.

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is not valid
under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is too short
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Vinod Koul Feb. 26, 2020, 4 p.m. UTC | #1
On 26-02-20, 15:01, Amit Kucheria wrote:
> The qcom-tsens binding requires a SoC-specific and a TSENS
> family-specific binding to be specified in the compatible string.
> 
> Since them family-specific binding is not listed in the .dtsi file, we
> see the following warnings in 'make dtbs_check'. Fix them.
> 
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is not valid
> under any of the given schemas (Possible causes of the failure):
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is too short
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']

Reviewed-by: Vinod Koul <vkoul@kernel.org>

> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 9f31064f2374..1748ea3f4b4f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -860,7 +860,7 @@
>  		};
>  
>  		tsens: thermal-sensor@4a9000 {
> -			compatible = "qcom,msm8916-tsens";
> +			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
>  			reg = <0x4a9000 0x1000>, /* TM */
>  			      <0x4a8000 0x1000>; /* SROT */
>  			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
> -- 
> 2.20.1
Bjorn Andersson Feb. 28, 2020, 3:21 a.m. UTC | #2
On Wed 26 Feb 01:31 PST 2020, Amit Kucheria wrote:

$subject should be "arm64: dts: qcom: msm8916: ..."

Apart from that this looks good.

Regards,
Bjorn

> The qcom-tsens binding requires a SoC-specific and a TSENS
> family-specific binding to be specified in the compatible string.
> 
> Since them family-specific binding is not listed in the .dtsi file, we
> see the following warnings in 'make dtbs_check'. Fix them.
> 
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is not valid
> under any of the given schemas (Possible causes of the failure):
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is too short
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 9f31064f2374..1748ea3f4b4f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -860,7 +860,7 @@
>  		};
>  
>  		tsens: thermal-sensor@4a9000 {
> -			compatible = "qcom,msm8916-tsens";
> +			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
>  			reg = <0x4a9000 0x1000>, /* TM */
>  			      <0x4a8000 0x1000>; /* SROT */
>  			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
> -- 
> 2.20.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9f31064f2374..1748ea3f4b4f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -860,7 +860,7 @@ 
 		};
 
 		tsens: thermal-sensor@4a9000 {
-			compatible = "qcom,msm8916-tsens";
+			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
 			reg = <0x4a9000 0x1000>, /* TM */
 			      <0x4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;