diff mbox series

[12/15] arm64: dts: msm8974: thermal: Add interrupt support

Message ID ec8205566eb9c015ad51fbb88f0da7ca60b414fd.1564091601.git.amit.kucheria@linaro.org (mailing list archive)
State Superseded
Headers show
Series thermal: qcom: tsens: Add interrupt support | expand

Commit Message

Amit Kucheria July 25, 2019, 10:18 p.m. UTC 
Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
Cc: masneyb@onstation.org

 arch/arm/boot/dts/qcom-msm8974.dtsi | 36 +++++++++++++++--------------
 1 file changed, 19 insertions(+), 17 deletions(-)

Comments

Luca Weiss July 29, 2019, 9:03 a.m. UTC | #1 
On Freitag, 26. Juli 2019 00:18:47 CEST Amit Kucheria wrote:
> Register upper-lower interrupt for the tsens controller.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> Cc: masneyb@onstation.org
> 
>  arch/arm/boot/dts/qcom-msm8974.dtsi | 36 +++++++++++++++--------------
>  1 file changed, 19 insertions(+), 17 deletions(-)
> 

Hi, the title of this patch should be "arm" and not "arm64".

Luca
Amit Kucheria July 29, 2019, 9:29 a.m. UTC | #2 
On Mon, Jul 29, 2019 at 2:33 PM Luca Weiss <luca@z3ntu.xyz> wrote:
>
> On Freitag, 26. Juli 2019 00:18:47 CEST Amit Kucheria wrote:
> > Register upper-lower interrupt for the tsens controller.
> >
> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> > ---
> > Cc: masneyb@onstation.org
> >
> >  arch/arm/boot/dts/qcom-msm8974.dtsi | 36 +++++++++++++++--------------
> >  1 file changed, 19 insertions(+), 17 deletions(-)
> >
>
> Hi, the title of this patch should be "arm" and not "arm64".

Good catch! Copy-paste error, will fix.
Brian Masney Aug. 8, 2019, 8:49 p.m. UTC | #3 
On Fri, Jul 26, 2019 at 03:48:47AM +0530, Amit Kucheria wrote:
> Register upper-lower interrupt for the tsens controller.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

Tested-by: Brian Masney <masneyb@onstation.org>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d32f639505f1..d10d47d20ab8 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -139,8 +139,8 @@ 
 
 	thermal-zones {
 		cpu-thermal0 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -159,8 +159,8 @@ 
 		};
 
 		cpu-thermal1 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -179,8 +179,8 @@ 
 		};
 
 		cpu-thermal2 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -199,8 +199,8 @@ 
 		};
 
 		cpu-thermal3 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -219,8 +219,8 @@ 
 		};
 
 		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -234,8 +234,8 @@ 
 		};
 
 		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -250,7 +250,7 @@ 
 
 		video-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <1000>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 3>;
 
@@ -279,8 +279,8 @@ 
 		};
 
 		gpu-thermal-top {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 9>;
 
@@ -294,8 +294,8 @@ 
 		};
 
 		gpu-thermal-bottom {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 10>;
 
@@ -531,6 +531,8 @@ 
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tsens";
 			#thermal-sensor-cells = <1>;
 		};