mbox series

[0/3] block: set ioprio value

Message ID 20190710040224.12342-1-chaitanya.kulkarni@wdc.com (mailing list archive)
Headers show
Series block: set ioprio value | expand

Message

Chaitanya Kulkarni July 10, 2019, 4:02 a.m. UTC
Hi,

While experimenting with the ionice, I came across the scenario where
I cannot see the bio/request priority field being set when using
blkdiscard for REQ_OP_DISCARD, REQ_OP_WRITE_ZEROES and other operations
like REQ_OP_WRITE_SAME, REQ_OP_ZONE_RESET, and flush.

This is a small patch-series which sets the ioprio value at various
places for the zone-reset, flush, write-zeroes and discard operations.
This patch series uses get_current_ioprio() so that bio associated
with the respective operation can inherit the value from current
process.

In order to test this, I've modified the null_blk and enabled the 
write_zeroes through module param. Following are the results.

Without these patches:-  

# modprobe null_blk gb=5 nr_devices=1 write_zeroes=1
# for prio in `seq 0 3`; do ionice -c ${prio} blkdiscard -z -o 0 -l 4096 /dev/nullb0; done
# dmesg  -c 
[  402.958458] null_handle_cmd REQ_OP_WRITE_ZEROES priority class 0
[  402.966024] null_handle_cmd REQ_OP_WRITE_ZEROES priority class 0
[  402.973960] null_handle_cmd REQ_OP_WRITE_ZEROES priority class 0
[  402.981373] null_handle_cmd REQ_OP_WRITE_ZEROES priority class 0
# 

With these patches:-

# modprobe null_blk gb=5 nr_devices=1 write_zeroes=1
# for prio in `seq 0 3`; do ionice -c ${prio} blkdiscard -z -o 0 -l 4096 /dev/nullb0; done 
# dmesg  -c 
[ 1426.091772] null_handle_cmd REQ_OP_WRITE_ZEROES priority class 0
[ 1426.100177] null_handle_cmd REQ_OP_WRITE_ZEROES priority class 1
[ 1426.108035] null_handle_cmd REQ_OP_WRITE_ZEROES priority class 2
[ 1426.115768] null_handle_cmd REQ_OP_WRITE_ZEROES priority class 3
# 

With the block trace extension support is being worked on [1] which has
the ability to report the I/O priority, now we can track the correct
priority values with this patch-series.

Regards,
Chaitanya

[1] https://www.spinics.net/lists/linux-btrace/msg00880.html


Chaitanya Kulkarni (3):
  block: set ioprio for zone-reset bio
  block: set ioprio for flush bio
  block: set ioprio for write-zeroes, discard etc

 block/blk-flush.c | 2 ++
 block/blk-lib.c   | 6 ++++++
 block/blk-zoned.c | 1 +
 3 files changed, 9 insertions(+)