diff mbox

[v8,5/7] block: Implement support for zoned block devices

Message ID 1476772835-18541-6-git-send-email-damien.lemoal@wdc.com (mailing list archive)
State New, archived
Headers show

Commit Message

Damien Le Moal Oct. 18, 2016, 6:40 a.m. UTC
From: Hannes Reinecke <hare@suse.de>

Implement zoned block device zone information reporting and reset.
Zone information are reported as struct blk_zone. This implementation
does not differentiate between host-aware and host-managed device
models and is valid for both. Two functions are provided:
blkdev_report_zones for discovering the zone configuration of a
zoned block device, and blkdev_reset_zones for resetting the write
pointer of sequential zones. The helper function blk_queue_zone_size
and bdev_zone_size are also provided for, as the name suggest,
obtaining the zone size (in 512B sectors) of the zones of the device.

Signed-off-by: Hannes Reinecke <hare@suse.de>

[Damien: * Removed the zone cache
         * Implement report zones operation based on earlier proposal
           by Shaun Tancheff <shaun.tancheff@seagate.com>]
Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com>
---
 block/Kconfig                 |   8 ++
 block/Makefile                |   1 +
 block/blk-zoned.c             | 257 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/blkdev.h        |  31 +++++
 include/uapi/linux/Kbuild     |   1 +
 include/uapi/linux/blkzoned.h | 103 +++++++++++++++++
 6 files changed, 401 insertions(+)
 create mode 100644 block/blk-zoned.c
 create mode 100644 include/uapi/linux/blkzoned.h
diff mbox

Patch

diff --git a/block/Kconfig b/block/Kconfig
index 5136ad4..7bb9bf8 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -89,6 +89,14 @@  config BLK_DEV_INTEGRITY
 	T10/SCSI Data Integrity Field or the T13/ATA External Path
 	Protection.  If in doubt, say N.
 
+config BLK_DEV_ZONED
+	bool "Zoned block device support"
+	---help---
+	Block layer zoned block device support. This option enables
+	support for ZAC/ZBC host-managed and host-aware zoned block devices.
+
+	Say yes here if you have a ZAC or ZBC storage device.
+
 config BLK_DEV_THROTTLING
 	bool "Block layer bio throttling support"
 	depends on BLK_CGROUP=y
diff --git a/block/Makefile b/block/Makefile
index 9eda232..aee67fa 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -22,4 +22,5 @@  obj-$(CONFIG_IOSCHED_CFQ)	+= cfq-iosched.o
 obj-$(CONFIG_BLOCK_COMPAT)	+= compat_ioctl.o
 obj-$(CONFIG_BLK_CMDLINE_PARSER)	+= cmdline-parser.o
 obj-$(CONFIG_BLK_DEV_INTEGRITY) += bio-integrity.o blk-integrity.o t10-pi.o
+obj-$(CONFIG_BLK_DEV_ZONED)	+= blk-zoned.o
 
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
new file mode 100644
index 0000000..1603573
--- /dev/null
+++ b/block/blk-zoned.c
@@ -0,0 +1,257 @@ 
+/*
+ * Zoned block device handling
+ *
+ * Copyright (c) 2015, Hannes Reinecke
+ * Copyright (c) 2015, SUSE Linux GmbH
+ *
+ * Copyright (c) 2016, Damien Le Moal
+ * Copyright (c) 2016, Western Digital
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rbtree.h>
+#include <linux/blkdev.h>
+
+static inline sector_t blk_zone_start(struct request_queue *q,
+				      sector_t sector)
+{
+	sector_t zone_mask = blk_queue_zone_size(q) - 1;
+
+	return sector & ~zone_mask;
+}
+
+/*
+ * Check that a zone report belongs to the partition.
+ * If yes, fix its start sector and write pointer, copy it in the
+ * zone information array and return true. Return false otherwise.
+ */
+static bool blkdev_report_zone(struct block_device *bdev,
+			       struct blk_zone *rep,
+			       struct blk_zone *zone)
+{
+	sector_t offset = get_start_sect(bdev);
+
+	if (rep->start < offset)
+		return false;
+
+	rep->start -= offset;
+	if (rep->start + rep->len > bdev->bd_part->nr_sects)
+		return false;
+
+	if (rep->type == BLK_ZONE_TYPE_CONVENTIONAL)
+		rep->wp = rep->start + rep->len;
+	else
+		rep->wp -= offset;
+	memcpy(zone, rep, sizeof(struct blk_zone));
+
+	return true;
+}
+
+/**
+ * blkdev_report_zones - Get zones information
+ * @bdev:	Target block device
+ * @sector:	Sector from which to report zones
+ * @zones:	Array of zone structures where to return the zones information
+ * @nr_zones:	Number of zone structures in the zone array
+ * @gfp_mask:	Memory allocation flags (for bio_alloc)
+ *
+ * Description:
+ *    Get zone information starting from the zone containing @sector.
+ *    The number of zone information reported may be less than the number
+ *    requested by @nr_zones. The number of zones actually reported is
+ *    returned in @nr_zones.
+ */
+int blkdev_report_zones(struct block_device *bdev,
+			sector_t sector,
+			struct blk_zone *zones,
+			unsigned int *nr_zones,
+			gfp_t gfp_mask)
+{
+	struct request_queue *q = bdev_get_queue(bdev);
+	struct blk_zone_report_hdr *hdr;
+	unsigned int nrz = *nr_zones;
+	struct page *page;
+	unsigned int nr_rep;
+	size_t rep_bytes;
+	unsigned int nr_pages;
+	struct bio *bio;
+	struct bio_vec *bv;
+	unsigned int i, n, nz;
+	unsigned int ofst;
+	void *addr;
+	int ret = 0;
+
+	if (!q)
+		return -ENXIO;
+
+	if (!blk_queue_is_zoned(q))
+		return -EOPNOTSUPP;
+
+	if (!nrz)
+		return 0;
+
+	if (sector > bdev->bd_part->nr_sects) {
+		*nr_zones = 0;
+		return 0;
+	}
+
+	/*
+	 * The zone report has a header. So make room for it in the
+	 * payload. Also make sure that the report fits in a single BIO
+	 * that will not be split down the stack.
+	 */
+	rep_bytes = sizeof(struct blk_zone_report_hdr) +
+		sizeof(struct blk_zone) * nrz;
+	rep_bytes = (rep_bytes + PAGE_SIZE - 1) & PAGE_MASK;
+	if (rep_bytes > (queue_max_sectors(q) << 9))
+		rep_bytes = queue_max_sectors(q) << 9;
+
+	nr_pages = min_t(unsigned int, BIO_MAX_PAGES,
+			 rep_bytes >> PAGE_SHIFT);
+	nr_pages = min_t(unsigned int, nr_pages,
+			 queue_max_segments(q));
+
+	bio = bio_alloc(gfp_mask, nr_pages);
+	if (!bio)
+		return -ENOMEM;
+
+	bio->bi_bdev = bdev;
+	bio->bi_iter.bi_sector = blk_zone_start(q, sector);
+	bio_set_op_attrs(bio, REQ_OP_ZONE_REPORT, 0);
+
+	for (i = 0; i < nr_pages; i++) {
+		page = alloc_page(gfp_mask);
+		if (!page) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		if (!bio_add_page(bio, page, PAGE_SIZE, 0)) {
+			__free_page(page);
+			break;
+		}
+	}
+
+	if (i == 0)
+		ret = -ENOMEM;
+	else
+		ret = submit_bio_wait(bio);
+	if (ret)
+		goto out;
+
+	/*
+	 * Process the report result: skip the header and go through the
+	 * reported zones to fixup and fixup the zone information for
+	 * partitions. At the same time, return the zone information into
+	 * the zone array.
+	 */
+	n = 0;
+	nz = 0;
+	nr_rep = 0;
+	bio_for_each_segment_all(bv, bio, i) {
+
+		if (!bv->bv_page)
+			break;
+
+		addr = kmap_atomic(bv->bv_page);
+
+		/* Get header in the first page */
+		ofst = 0;
+		if (!nr_rep) {
+			hdr = (struct blk_zone_report_hdr *) addr;
+			nr_rep = hdr->nr_zones;
+			ofst = sizeof(struct blk_zone_report_hdr);
+		}
+
+		/* Fixup and report zones */
+		while (ofst < bv->bv_len &&
+		       n < nr_rep && nz < nrz) {
+			if (blkdev_report_zone(bdev, addr + ofst, &zones[nz]))
+				nz++;
+			ofst += sizeof(struct blk_zone);
+			n++;
+		}
+
+		kunmap_atomic(addr);
+
+		if (n >= nr_rep || nz >= nrz)
+			break;
+
+	}
+
+out:
+	bio_for_each_segment_all(bv, bio, i)
+		__free_page(bv->bv_page);
+	bio_put(bio);
+
+	if (ret == 0)
+		*nr_zones = nz;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(blkdev_report_zones);
+
+/**
+ * blkdev_reset_zones - Reset zones write pointer
+ * @bdev:	Target block device
+ * @sector:	Start sector of the first zone to reset
+ * @nr_sectors:	Number of sectors, at least the length of one zone
+ * @gfp_mask:	Memory allocation flags (for bio_alloc)
+ *
+ * Description:
+ *    Reset the write pointer of the zones contained in the range
+ *    @sector..@sector+@nr_sectors. Specifying the entire disk sector range
+ *    is valid, but the specified range should not contain conventional zones.
+ */
+int blkdev_reset_zones(struct block_device *bdev,
+		       sector_t sector, sector_t nr_sectors,
+		       gfp_t gfp_mask)
+{
+	struct request_queue *q = bdev_get_queue(bdev);
+	sector_t zone_sectors;
+	sector_t end_sector = sector + nr_sectors;
+	struct bio *bio;
+	int ret;
+
+	if (!q)
+		return -ENXIO;
+
+	if (!blk_queue_is_zoned(q))
+		return -EOPNOTSUPP;
+
+	if (end_sector > bdev->bd_part->nr_sects)
+		/* Out of range */
+		return -EINVAL;
+
+	/* Check alignment (handle eventual smaller last zone) */
+	zone_sectors = blk_queue_zone_size(q);
+	if (sector & (zone_sectors - 1))
+		return -EINVAL;
+
+	if ((nr_sectors & (zone_sectors - 1)) &&
+	    end_sector != bdev->bd_part->nr_sects)
+		return -EINVAL;
+
+	while (sector < end_sector) {
+
+		bio = bio_alloc(gfp_mask, 0);
+		bio->bi_iter.bi_sector = sector;
+		bio->bi_bdev = bdev;
+		bio_set_op_attrs(bio, REQ_OP_ZONE_RESET, 0);
+
+		ret = submit_bio_wait(bio);
+		bio_put(bio);
+
+		if (ret)
+			return ret;
+
+		sector += zone_sectors;
+
+		/* This may take a while, so be nice to others */
+		cond_resched();
+
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(blkdev_reset_zones);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index f19e16b..252043f 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -24,6 +24,7 @@ 
 #include <linux/rcupdate.h>
 #include <linux/percpu-refcount.h>
 #include <linux/scatterlist.h>
+#include <linux/blkzoned.h>
 
 struct module;
 struct scsi_ioctl_command;
@@ -302,6 +303,21 @@  struct queue_limits {
 	enum blk_zoned_model	zoned;
 };
 
+#ifdef CONFIG_BLK_DEV_ZONED
+
+struct blk_zone_report_hdr {
+	unsigned int	nr_zones;
+	u8		padding[60];
+};
+
+extern int blkdev_report_zones(struct block_device *bdev,
+			       sector_t sector, struct blk_zone *zones,
+			       unsigned int *nr_zones, gfp_t gfp_mask);
+extern int blkdev_reset_zones(struct block_device *bdev, sector_t sectors,
+			      sector_t nr_sectors, gfp_t gfp_mask);
+
+#endif /* CONFIG_BLK_DEV_ZONED */
+
 struct request_queue {
 	/*
 	 * Together with queue_head for cacheline sharing
@@ -654,6 +670,11 @@  static inline bool blk_queue_is_zoned(struct request_queue *q)
 	}
 }
 
+static inline unsigned int blk_queue_zone_size(struct request_queue *q)
+{
+	return blk_queue_is_zoned(q) ? q->limits.chunk_sectors : 0;
+}
+
 /*
  * We regard a request as sync, if either a read or a sync write
  */
@@ -1401,6 +1422,16 @@  static inline bool bdev_is_zoned(struct block_device *bdev)
 	return false;
 }
 
+static inline unsigned int bdev_zone_size(struct block_device *bdev)
+{
+	struct request_queue *q = bdev_get_queue(bdev);
+
+	if (q)
+		return blk_queue_zone_size(q);
+
+	return 0;
+}
+
 static inline int queue_dma_alignment(struct request_queue *q)
 {
 	return q ? q->dma_alignment : 511;
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 185f8ea..a2a7522 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -70,6 +70,7 @@  header-y += bfs_fs.h
 header-y += binfmts.h
 header-y += blkpg.h
 header-y += blktrace_api.h
+header-y += blkzoned.h
 header-y += bpf_common.h
 header-y += bpf.h
 header-y += bpqether.h
diff --git a/include/uapi/linux/blkzoned.h b/include/uapi/linux/blkzoned.h
new file mode 100644
index 0000000..a381721
--- /dev/null
+++ b/include/uapi/linux/blkzoned.h
@@ -0,0 +1,103 @@ 
+/*
+ * Zoned block devices handling.
+ *
+ * Copyright (C) 2015 Seagate Technology PLC
+ *
+ * Written by: Shaun Tancheff <shaun.tancheff@seagate.com>
+ *
+ * Modified by: Damien Le Moal <damien.lemoal@hgst.com>
+ * Copyright (C) 2016 Western Digital
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef _UAPI_BLKZONED_H
+#define _UAPI_BLKZONED_H
+
+#include <linux/types.h>
+
+/**
+ * enum blk_zone_type - Types of zones allowed in a zoned device.
+ *
+ * @BLK_ZONE_TYPE_CONVENTIONAL: The zone has no write pointer and can be writen
+ *                              randomly. Zone reset has no effect on the zone.
+ * @BLK_ZONE_TYPE_SEQWRITE_REQ: The zone must be written sequentially
+ * @BLK_ZONE_TYPE_SEQWRITE_PREF: The zone can be written non-sequentially
+ *
+ * Any other value not defined is reserved and must be considered as invalid.
+ */
+enum blk_zone_type {
+	BLK_ZONE_TYPE_CONVENTIONAL	= 0x1,
+	BLK_ZONE_TYPE_SEQWRITE_REQ	= 0x2,
+	BLK_ZONE_TYPE_SEQWRITE_PREF	= 0x3,
+};
+
+/**
+ * enum blk_zone_cond - Condition [state] of a zone in a zoned device.
+ *
+ * @BLK_ZONE_COND_NOT_WP: The zone has no write pointer, it is conventional.
+ * @BLK_ZONE_COND_EMPTY: The zone is empty.
+ * @BLK_ZONE_COND_IMP_OPEN: The zone is open, but not explicitly opened.
+ * @BLK_ZONE_COND_EXP_OPEN: The zones was explicitly opened by an
+ *                          OPEN ZONE command.
+ * @BLK_ZONE_COND_CLOSED: The zone was [explicitly] closed after writing.
+ * @BLK_ZONE_COND_FULL: The zone is marked as full, possibly by a zone
+ *                      FINISH ZONE command.
+ * @BLK_ZONE_COND_READONLY: The zone is read-only.
+ * @BLK_ZONE_COND_OFFLINE: The zone is offline (sectors cannot be read/written).
+ *
+ * The Zone Condition state machine in the ZBC/ZAC standards maps the above
+ * deinitions as:
+ *   - ZC1: Empty         | BLK_ZONE_EMPTY
+ *   - ZC2: Implicit Open | BLK_ZONE_COND_IMP_OPEN
+ *   - ZC3: Explicit Open | BLK_ZONE_COND_EXP_OPEN
+ *   - ZC4: Closed        | BLK_ZONE_CLOSED
+ *   - ZC5: Full          | BLK_ZONE_FULL
+ *   - ZC6: Read Only     | BLK_ZONE_READONLY
+ *   - ZC7: Offline       | BLK_ZONE_OFFLINE
+ *
+ * Conditions 0x5 to 0xC are reserved by the current ZBC/ZAC spec and should
+ * be considered invalid.
+ */
+enum blk_zone_cond {
+	BLK_ZONE_COND_NOT_WP	= 0x0,
+	BLK_ZONE_COND_EMPTY	= 0x1,
+	BLK_ZONE_COND_IMP_OPEN	= 0x2,
+	BLK_ZONE_COND_EXP_OPEN	= 0x3,
+	BLK_ZONE_COND_CLOSED	= 0x4,
+	BLK_ZONE_COND_READONLY	= 0xD,
+	BLK_ZONE_COND_FULL	= 0xE,
+	BLK_ZONE_COND_OFFLINE	= 0xF,
+};
+
+/**
+ * struct blk_zone - Zone descriptor for BLKREPORTZONE ioctl.
+ *
+ * @start: Zone start in 512 B sector units
+ * @len: Zone length in 512 B sector units
+ * @wp: Zone write pointer location in 512 B sector units
+ * @type: see enum blk_zone_type for possible values
+ * @cond: see enum blk_zone_cond for possible values
+ * @non_seq: Flag indicating that the zone is using non-sequential resources
+ *           (for host-aware zoned block devices only).
+ * @reset: Flag indicating that a zone reset is recommended.
+ * @reserved: Padding to 64 B to match the ZBC/ZAC defined zone descriptor size.
+ *
+ * start, len and wp use the regular 512 B sector unit, regardless of the
+ * device logical block size. The overall structure size is 64 B to match the
+ * ZBC/ZAC defined zone descriptor and allow support for future additional
+ * zone information.
+ */
+struct blk_zone {
+	__u64	start;		/* Zone start sector */
+	__u64	len;		/* Zone length in number of sectors */
+	__u64	wp;		/* Zone write pointer position */
+	__u8	type;		/* Zone type */
+	__u8	cond;		/* Zone condition */
+	__u8	non_seq;	/* Non-sequential write resources active */
+	__u8	reset;		/* Reset write pointer recommended */
+	__u8	reserved[36];
+};
+
+#endif /* _UAPI_BLKZONED_H */