@@ -81,6 +81,7 @@ int Detail(char *dev, struct context *c)
int external;
int inactive;
int is_container = 0;
+ char arrayst[12] = { 0 }; /* no state is >10 chars currently */
if (fd < 0) {
pr_err("cannot open %s: %s\n",
@@ -485,9 +486,21 @@ int Detail(char *dev, struct context *c)
else
st = ", degraded";
+ if (array.state & (1 << MD_SB_CLEAN)) {
+ if ((array.level == 0) ||
+ (array.level == LEVEL_LINEAR))
+ strncpy(arrayst,
+ map_num(sysfs_array_states,
+ sra->array_state),
+ sizeof(arrayst)-1);
+ else
+ strncpy(arrayst, "clean",
+ sizeof(arrayst)-1);
+ } else
+ strncpy(arrayst, "active", sizeof(arrayst)-1);
+
printf(" State : %s%s%s%s%s%s \n",
- (array.state & (1 << MD_SB_CLEAN)) ?
- "clean" : "active", st,
+ arrayst, st,
(!e || (e->percent < 0 &&
e->percent != RESYNC_PENDING &&
e->percent != RESYNC_DELAYED)) ?
@@ -1055,8 +1055,12 @@ int Wait(char *dev)
}
}
+/* The state "broken" is used only for RAID0/LINEAR - it's the same as
+ * "clean", but used in case the array has one or more members missing.
+ */
+#define CLEAN_STATES_LAST_POS 5
static char *clean_states[] = {
- "clear", "inactive", "readonly", "read-auto", "clean", NULL };
+ "clear", "inactive", "readonly", "read-auto", "clean", "broken", NULL };
int WaitClean(char *dev, int verbose)
{
@@ -1116,7 +1120,8 @@ int WaitClean(char *dev, int verbose)
rv = read(state_fd, buf, sizeof(buf));
if (rv < 0)
break;
- if (sysfs_match_word(buf, clean_states) <= 4)
+ if (sysfs_match_word(buf, clean_states)
+ <= CLEAN_STATES_LAST_POS)
break;
rv = sysfs_wait(state_fd, &delay);
if (rv < 0 && errno != EINTR)
@@ -150,6 +150,7 @@ mapping_t sysfs_array_states[] = {
{ "read-auto", ARRAY_READ_AUTO },
{ "clean", ARRAY_CLEAN },
{ "write-pending", ARRAY_WRITE_PENDING },
+ { "broken", ARRAY_BROKEN },
{ NULL, ARRAY_UNKNOWN_STATE }
};
@@ -373,6 +373,7 @@ struct mdinfo {
ARRAY_ACTIVE,
ARRAY_WRITE_PENDING,
ARRAY_ACTIVE_IDLE,
+ ARRAY_BROKEN,
ARRAY_UNKNOWN_STATE,
} array_state;
struct md_bb bb;
@@ -21,7 +21,7 @@
extern const char Name[];
enum array_state { clear, inactive, suspended, readonly, read_auto,
- clean, active, write_pending, active_idle, bad_word};
+ clean, active, write_pending, active_idle, broken, bad_word};
enum sync_action { idle, reshape, resync, recover, check, repair, bad_action };
@@ -26,7 +26,7 @@
static char *array_states[] = {
"clear", "inactive", "suspended", "readonly", "read-auto",
- "clean", "active", "write-pending", "active-idle", NULL };
+ "clean", "active", "write-pending", "active-idle", "broken", NULL };
static char *sync_actions[] = {
"idle", "reshape", "resync", "recover", "check", "repair", NULL
};
@@ -476,7 +476,7 @@ static int read_and_act(struct active_array *a, fd_set *fds)
a->next_state = clean;
ret |= ARRAY_DIRTY;
}
- if (a->curr_state == clean) {
+ if ((a->curr_state == clean) || (a->curr_state == broken)) {
a->container->ss->set_array_state(a, 1);
}
if (a->curr_state == active ||
Currently if a md raid0/linear array gets one or more members removed while being mounted, kernel keeps showing state 'clean' in the 'array_state' sysfs attribute. Despite udev signaling the member device is gone, 'mdadm' cannot issue the STOP_ARRAY ioctl successfully, given the array is mounted. Nothing else hints that something is wrong (except that the removed devices don't show properly in the output of mdadm 'detail' command). There is no other property to be checked, and if user is not performing reads/writes to the array, even kernel log is quiet and doesn't give a clue about the missing member. This patch is the mdadm counterpart of kernel new array state 'broken'. The 'broken' state mimics the state 'clean' in every aspect, being useful only to distinguish if an array has some member missing. All necessary paths in mdadm were changed to deal with 'broken' state, and in case the tool runs in a kernel that is not updated, it'll work normally, i.e., it doesn't require the 'broken' state in order to work. Also, this patch changes the way the array state is showed in the 'detail' command (for raid0/linear only) - now it takes the 'array_state' sysfs attribute into account instead of only rely in the MD_SB_CLEAN flag. Cc: NeilBrown <neilb@suse.com> Cc: Song Liu <songliubraving@fb.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> --- v1 -> v2: * Added handling for md/linear 'broken' state. Detail.c | 17 +++++++++++++++-- Monitor.c | 9 +++++++-- maps.c | 1 + mdadm.h | 1 + mdmon.h | 2 +- monitor.c | 4 ++-- 6 files changed, 27 insertions(+), 7 deletions(-)