diff mbox series

[RFC,v4,4/4] scsi: ufs-qcom: add Inline Crypto Engine support

Message ID 20200501045111.665881-5-ebiggers@kernel.org (mailing list archive)
State New, archived
Headers show
Series Inline crypto support on DragonBoard 845c | expand

Commit Message

Eric Biggers May 1, 2020, 4:51 a.m. UTC
From: Eric Biggers <ebiggers@google.com>

Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.

The standards-compliant parts, such as querying the crypto capabilities
and enabling crypto for individual UFS requests, are already handled by
ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
However, ICE requires vendor-specific init, enable, and resume logic,
and it requires that keys be programmed and evicted by vendor-specific
SMC calls.  Make the ufs-qcom driver handle these details.

I tested this on Dragonboard 845c, which is a publicly available
development board that uses the Snapdragon 845 SoC and runs the upstream
Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
phones.  This testing included (among other things) verifying that the
expected ciphertext was produced, both manually using ext4 encryption
and automatically using a block layer self-test I've written.

This driver also works nearly as-is on Snapdragon 765 and Snapdragon
865, which are very recent SoCs, having just been announced in Dec 2019
(though these newer SoCs currently lack upstream kernel support).

This is based very loosely on the vendor-provided driver in the kernel
source code for the Pixel 3, but I've greatly simplified it.  Also, for
now I've only included support for major version 3 of ICE, since that's
all I have the hardware to test with the mainline kernel.  Plus it
appears that version 3 is easier to use than older versions of ICE.

For now, only allow using AES-256-XTS.  The hardware also declares
support for AES-128-XTS, AES-{128,256}-ECB, and AES-{128,256}-CBC
(BitLocker variant).  But none of these others are really useful, and
they'd need to be individually tested to be sure they worked properly.

This commit also changes the name of the loadable module from "ufs-qcom"
to "ufs_qcom", as this is necessary to compile it from multiple source
files (unless we were to rename ufs-qcom.c).

Signed-off-by: Eric Biggers <ebiggers@google.com>
---
 MAINTAINERS                     |   2 +-
 drivers/scsi/ufs/Kconfig        |   1 +
 drivers/scsi/ufs/Makefile       |   4 +-
 drivers/scsi/ufs/ufs-qcom-ice.c | 245 ++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufs-qcom.c     |  12 +-
 drivers/scsi/ufs/ufs-qcom.h     |  27 ++++
 6 files changed, 288 insertions(+), 3 deletions(-)
 create mode 100644 drivers/scsi/ufs/ufs-qcom-ice.c

Comments

Thara Gopinath May 7, 2020, 12:36 p.m. UTC | #1
On 5/1/20 12:51 AM, Eric Biggers wrote:
> From: Eric Biggers <ebiggers@google.com>
> 
> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
> 
> The standards-compliant parts, such as querying the crypto capabilities
> and enabling crypto for individual UFS requests, are already handled by
> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
> However, ICE requires vendor-specific init, enable, and resume logic,
> and it requires that keys be programmed and evicted by vendor-specific
> SMC calls.  Make the ufs-qcom driver handle these details.
> 
> I tested this on Dragonboard 845c, which is a publicly available
> development board that uses the Snapdragon 845 SoC and runs the upstream
> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
> phones.  This testing included (among other things) verifying that the
> expected ciphertext was produced, both manually using ext4 encryption
> and automatically using a block layer self-test I've written.
Hello Eric,

I am interested in testing out this series on 845, 855 and if possile on 
865 platforms. Can you give me some more details about your testing please.

> 
> This driver also works nearly as-is on Snapdragon 765 and Snapdragon
> 865, which are very recent SoCs, having just been announced in Dec 2019
> (though these newer SoCs currently lack upstream kernel support).
> 
> This is based very loosely on the vendor-provided driver in the kernel
> source code for the Pixel 3, but I've greatly simplified it.  Also, for
> now I've only included support for major version 3 of ICE, since that's
> all I have the hardware to test with the mainline kernel.  Plus it
> appears that version 3 is easier to use than older versions of ICE.
> 
> For now, only allow using AES-256-XTS.  The hardware also declares
> support for AES-128-XTS, AES-{128,256}-ECB, and AES-{128,256}-CBC
> (BitLocker variant).  But none of these others are really useful, and
> they'd need to be individually tested to be sure they worked properly.
> 
> This commit also changes the name of the loadable module from "ufs-qcom"
> to "ufs_qcom", as this is necessary to compile it from multiple source
> files (unless we were to rename ufs-qcom.c).
> 
> Signed-off-by: Eric Biggers <ebiggers@google.com>
> ---
>   MAINTAINERS                     |   2 +-
>   drivers/scsi/ufs/Kconfig        |   1 +
>   drivers/scsi/ufs/Makefile       |   4 +-
>   drivers/scsi/ufs/ufs-qcom-ice.c | 245 ++++++++++++++++++++++++++++++++
>   drivers/scsi/ufs/ufs-qcom.c     |  12 +-
>   drivers/scsi/ufs/ufs-qcom.h     |  27 ++++
>   6 files changed, 288 insertions(+), 3 deletions(-)
>   create mode 100644 drivers/scsi/ufs/ufs-qcom-ice.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 26f281d9f32a4a..cab5fe76784592 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2236,7 +2236,7 @@ F:	drivers/pci/controller/dwc/pcie-qcom.c
>   F:	drivers/phy/qualcomm/
>   F:	drivers/power/*/msm*
>   F:	drivers/reset/reset-qcom-*
> -F:	drivers/scsi/ufs/ufs-qcom.*
> +F:	drivers/scsi/ufs/ufs-qcom*
>   F:	drivers/spi/spi-geni-qcom.c
>   F:	drivers/spi/spi-qcom-qspi.c
>   F:	drivers/spi/spi-qup.c
> diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
> index 5ed3f209f88100..c1a94d99e161ee 100644
> --- a/drivers/scsi/ufs/Kconfig
> +++ b/drivers/scsi/ufs/Kconfig
> @@ -99,6 +99,7 @@ config SCSI_UFS_DWC_TC_PLATFORM
>   config SCSI_UFS_QCOM
>   	tristate "QCOM specific hooks to UFS controller platform driver"
>   	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
> +	select QCOM_SCM
>   	select RESET_CONTROLLER
>   	help
>   	  This selects the QCOM specific additions to UFSHCD platform driver.
> diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
> index 197e178f44bce3..13fda1b697b2a2 100644
> --- a/drivers/scsi/ufs/Makefile
> +++ b/drivers/scsi/ufs/Makefile
> @@ -3,7 +3,9 @@
>   obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o
>   obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
>   obj-$(CONFIG_SCSI_UFS_CDNS_PLATFORM) += cdns-pltfrm.o
> -obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
> +obj-$(CONFIG_SCSI_UFS_QCOM) += ufs_qcom.o
> +ufs_qcom-y += ufs-qcom.o
> +ufs_qcom-$(CONFIG_SCSI_UFS_CRYPTO) += ufs-qcom-ice.o
>   obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
>   ufshcd-core-y				+= ufshcd.o ufs-sysfs.o
>   ufshcd-core-$(CONFIG_SCSI_UFS_BSG)	+= ufs_bsg.o
> diff --git a/drivers/scsi/ufs/ufs-qcom-ice.c b/drivers/scsi/ufs/ufs-qcom-ice.c
> new file mode 100644
> index 00000000000000..9e837fdcb0ac2b
> --- /dev/null
> +++ b/drivers/scsi/ufs/ufs-qcom-ice.c
> @@ -0,0 +1,245 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Qualcomm ICE (Inline Crypto Engine) support.
> + *
> + * Copyright (c) 2014-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2019 Google LLC
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/qcom_scm.h>
> +
> +#include "ufshcd-crypto.h"
> +#include "ufs-qcom.h"
> +
> +#define AES_256_XTS_KEY_SIZE			64
> +
> +/* QCOM ICE registers */
> +
> +#define QCOM_ICE_REG_CONTROL			0x0000
> +#define QCOM_ICE_REG_RESET			0x0004
> +#define QCOM_ICE_REG_VERSION			0x0008
> +#define QCOM_ICE_REG_FUSE_SETTING		0x0010
> +#define QCOM_ICE_REG_PARAMETERS_1		0x0014
> +#define QCOM_ICE_REG_PARAMETERS_2		0x0018
> +#define QCOM_ICE_REG_PARAMETERS_3		0x001C
> +#define QCOM_ICE_REG_PARAMETERS_4		0x0020
> +#define QCOM_ICE_REG_PARAMETERS_5		0x0024
> +
> +/* QCOM ICE v3.X only */
> +#define QCOM_ICE_GENERAL_ERR_STTS		0x0040
> +#define QCOM_ICE_INVALID_CCFG_ERR_STTS		0x0030
> +#define QCOM_ICE_GENERAL_ERR_MASK		0x0044
> +
> +/* QCOM ICE v2.X only */
> +#define QCOM_ICE_REG_NON_SEC_IRQ_STTS		0x0040
> +#define QCOM_ICE_REG_NON_SEC_IRQ_MASK		0x0044
> +
> +#define QCOM_ICE_REG_NON_SEC_IRQ_CLR		0x0048
> +#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME1	0x0050
> +#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME2	0x0054
> +#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME1	0x0058
> +#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME2	0x005C
> +#define QCOM_ICE_REG_STREAM1_BIST_ERROR_VEC	0x0060
> +#define QCOM_ICE_REG_STREAM2_BIST_ERROR_VEC	0x0064
> +#define QCOM_ICE_REG_STREAM1_BIST_FINISH_VEC	0x0068
> +#define QCOM_ICE_REG_STREAM2_BIST_FINISH_VEC	0x006C
> +#define QCOM_ICE_REG_BIST_STATUS		0x0070
> +#define QCOM_ICE_REG_BYPASS_STATUS		0x0074
> +#define QCOM_ICE_REG_ADVANCED_CONTROL		0x1000
> +#define QCOM_ICE_REG_ENDIAN_SWAP		0x1004
> +#define QCOM_ICE_REG_TEST_BUS_CONTROL		0x1010
> +#define QCOM_ICE_REG_TEST_BUS_REG		0x1014
> +
> +/* BIST ("built-in self-test"?) status flags */
> +#define QCOM_ICE_BIST_STATUS_MASK		0xF0000000
> +
> +#define QCOM_ICE_FUSE_SETTING_MASK		0x1
> +#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK	0x2
> +#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK	0x4
> +
> +#define qcom_ice_writel(host, val, reg)	\
> +	writel((val), (host)->ice_mmio + (reg))
> +#define qcom_ice_readl(host, reg)	\
> +	readl((host)->ice_mmio + (reg))
> +
> +static bool qcom_ice_supported(struct ufs_qcom_host *host)
> +{
> +	struct device *dev = host->hba->dev;
> +	u32 regval = qcom_ice_readl(host, QCOM_ICE_REG_VERSION);
> +	int major = regval >> 24;
> +	int minor = (regval >> 16) & 0xFF;
> +	int step = regval & 0xFFFF;
> +
> +	/* For now this driver only supports ICE version 3. */
> +	if (major != 3) {
> +		dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n",
> +			 major, minor, step);
> +		return false;
> +	}
> +
> +	dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n",
> +		 major, minor, step);
> +
> +	/* If fuses are blown, ICE might not work in the standard way. */
> +	regval = qcom_ice_readl(host, QCOM_ICE_REG_FUSE_SETTING);
> +	if (regval & (QCOM_ICE_FUSE_SETTING_MASK |
> +		      QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK |
> +		      QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) {
> +		dev_warn(dev, "Fuses are blown; ICE is unusable!\n");
> +		return false;
> +	}
> +	return true;
> +}
> +
> +int ufs_qcom_ice_init(struct ufs_qcom_host *host)
> +{
> +	struct ufs_hba *hba = host->hba;
> +	struct device *dev = hba->dev;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct resource *res;
> +	int err;
> +
> +	if (!(ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES) &
> +	      MASK_CRYPTO_SUPPORT))
> +		return 0;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
> +	if (!res) {
> +		dev_warn(dev, "ICE registers not found\n");
> +		goto disable;
> +	}
> +
> +	if (!qcom_scm_ice_available()) {
> +		dev_warn(dev, "ICE SCM interface not found\n");
> +		goto disable;
> +	}
> +
> +	host->ice_mmio = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(host->ice_mmio)) {
> +		err = PTR_ERR(host->ice_mmio);
> +		dev_err(dev, "Failed to map ICE registers; err=%d\n", err);
> +		return err;
> +	}
> +
> +	if (!qcom_ice_supported(host))
> +		goto disable;
> +
> +	return 0;
> +
> +disable:
> +	dev_warn(dev, "Disabling inline encryption support\n");
> +	hba->caps &= ~UFSHCD_CAP_CRYPTO;
> +	return 0;
> +}
> +
> +static void qcom_ice_low_power_mode_enable(struct ufs_qcom_host *host)
> +{
> +	u32 regval;
> +
> +	regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
> +	/*
> +	 * Enable low power mode sequence
> +	 * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0
> +	 */
> +	regval |= 0x7000;
> +	qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
> +}
> +
> +static void qcom_ice_optimization_enable(struct ufs_qcom_host *host)
> +{
> +	u32 regval;
> +
> +	/* ICE Optimizations Enable Sequence */
> +	regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
> +	regval |= 0xD807100;
> +	/* ICE HPG requires delay before writing */
> +	udelay(5);
> +	qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
> +	udelay(5);
> +}
> +
> +int ufs_qcom_ice_enable(struct ufs_qcom_host *host)
> +{
> +	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
> +		return 0;
> +	qcom_ice_low_power_mode_enable(host);
> +	qcom_ice_optimization_enable(host);
> +	return ufs_qcom_ice_resume(host);
> +}
> +
> +/* Poll until all BIST bits are reset */
> +static int qcom_ice_wait_bist_status(struct ufs_qcom_host *host)
> +{
> +	int count;
> +	u32 reg;
> +
> +	for (count = 0; count < 100; count++) {
> +		reg = qcom_ice_readl(host, QCOM_ICE_REG_BIST_STATUS);
> +		if (!(reg & QCOM_ICE_BIST_STATUS_MASK))
> +			break;
> +		udelay(50);
> +	}
> +	if (reg)
> +		return -ETIMEDOUT;
> +	return 0;
> +}
> +
> +int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
> +{
> +	int err;
> +
> +	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
> +		return 0;
> +
> +	err = qcom_ice_wait_bist_status(host);
> +	if (err) {
> +		dev_err(host->hba->dev, "BIST status error (%d)\n", err);
> +		return err;
> +	}
> +	return 0;
> +}
> +
> +/*
> + * Program a key into a QC ICE keyslot, or evict a keyslot.  QC ICE requires
> + * vendor-specific SCM calls for this; it doesn't support the standard way.
> + */
> +int ufs_qcom_ice_program_key(struct ufs_hba *hba,
> +			     const union ufs_crypto_cfg_entry *cfg, int slot)
> +{
> +	union ufs_crypto_cap_entry cap;
> +	union {
> +		u8 bytes[AES_256_XTS_KEY_SIZE];
> +		u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
> +	} key;
> +	int i;
> +	int err;
Should there not be a check for here ?
	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
		return 0;
Eric Biggers May 7, 2020, 6:04 p.m. UTC | #2
Hi Thara,

On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
> 
> 
> On 5/1/20 12:51 AM, Eric Biggers wrote:
> > From: Eric Biggers <ebiggers@google.com>
> > 
> > Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
> > 
> > The standards-compliant parts, such as querying the crypto capabilities
> > and enabling crypto for individual UFS requests, are already handled by
> > ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
> > However, ICE requires vendor-specific init, enable, and resume logic,
> > and it requires that keys be programmed and evicted by vendor-specific
> > SMC calls.  Make the ufs-qcom driver handle these details.
> > 
> > I tested this on Dragonboard 845c, which is a publicly available
> > development board that uses the Snapdragon 845 SoC and runs the upstream
> > Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
> > phones.  This testing included (among other things) verifying that the
> > expected ciphertext was produced, both manually using ext4 encryption
> > and automatically using a block layer self-test I've written.
> Hello Eric,
> 
> I am interested in testing out this series on 845, 855 and if possile on 865
> platforms. Can you give me some more details about your testing please.
> 

Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.

A basic manual test would be:

1. Build a kernel with:

	CONFIG_BLK_INLINE_ENCRYPTION=y
	CONFIG_FS_ENCRYPTION=y
	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y

2. Create a filesystem with 'mkfs.ext4 -O encrypt' or 'mkfs.f2fs -O encrypt'

3. Mount the filesystem with '-o inlinecrypt'

4. Create an encrypted directory and copy some files into it.

5. Unmount the filesystem, and mount it *without* '-o inlinecrypt'.

6. Verify that the files match the originals.

If you're using a Linux distro like Debian, then creating an encrypted directory
is most easily done using the userspace tool https://github.com/google/fscrypt.

If instead your testing platform is Android, then instead of the above manual
test you can configure Android's encryption use the hardware and then run
VtsKernelEncryptionTest.  See the directions at
https://source.android.com/security/encryption/file-based.

Note that this patchset only includes the device tree support for Snapdragon
845.  For 855 and 865 you'd need to add the device tree support.

There are other ways this can be tested too, like xfstests, or my experimental
blk-crypto-selftest.  Let me know if you want any other suggestions.

> > +/*
> > + * Program a key into a QC ICE keyslot, or evict a keyslot.  QC ICE requires
> > + * vendor-specific SCM calls for this; it doesn't support the standard way.
> > + */
> > +int ufs_qcom_ice_program_key(struct ufs_hba *hba,
> > +			     const union ufs_crypto_cfg_entry *cfg, int slot)
> > +{
> > +	union ufs_crypto_cap_entry cap;
> > +	union {
> > +		u8 bytes[AES_256_XTS_KEY_SIZE];
> > +		u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
> > +	} key;
> > +	int i;
> > +	int err;
> Should there not be a check for here ?
> 	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
> 		return 0;
> 

(Please trim your replies appropriately; I almost missed this part!)

No, that's not necessary because this function is only called if we installed a
blk_keyslot_manager to the UFS host (thus exposing its crypto support to the
rest of the kernel).  We only do that if the driver sets UFSHCD_CAP_CRYPTO.

Likewise, we don't need to check for UFSHCD_CAP_CRYPTO in
ufshcd_crypto_keyslot_program(), ufshcd_crypto_keyslot_evict(), etc.

- Eric
Eric Biggers May 7, 2020, 6:08 p.m. UTC | #3
On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
> Hi Thara,
> 
> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
> > 
> > 
> > On 5/1/20 12:51 AM, Eric Biggers wrote:
> > > From: Eric Biggers <ebiggers@google.com>
> > > 
> > > Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
> > > 
> > > The standards-compliant parts, such as querying the crypto capabilities
> > > and enabling crypto for individual UFS requests, are already handled by
> > > ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
> > > However, ICE requires vendor-specific init, enable, and resume logic,
> > > and it requires that keys be programmed and evicted by vendor-specific
> > > SMC calls.  Make the ufs-qcom driver handle these details.
> > > 
> > > I tested this on Dragonboard 845c, which is a publicly available
> > > development board that uses the Snapdragon 845 SoC and runs the upstream
> > > Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
> > > phones.  This testing included (among other things) verifying that the
> > > expected ciphertext was produced, both manually using ext4 encryption
> > > and automatically using a block layer self-test I've written.
> > Hello Eric,
> > 
> > I am interested in testing out this series on 845, 855 and if possile on 865
> > platforms. Can you give me some more details about your testing please.
> > 
> 
> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
> 
> A basic manual test would be:
> 
> 1. Build a kernel with:
> 
> 	CONFIG_BLK_INLINE_ENCRYPTION=y
> 	CONFIG_FS_ENCRYPTION=y
> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y

Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.

- Eric
Steev Klimaszewski May 8, 2020, 8:18 p.m. UTC | #4
On 5/7/20 1:08 PM, Eric Biggers wrote:
> On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
>> Hi Thara,
>>
>> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
>>>
>>> On 5/1/20 12:51 AM, Eric Biggers wrote:
>>>> From: Eric Biggers <ebiggers@google.com>
>>>>
>>>> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
>>>>
>>>> The standards-compliant parts, such as querying the crypto capabilities
>>>> and enabling crypto for individual UFS requests, are already handled by
>>>> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
>>>> However, ICE requires vendor-specific init, enable, and resume logic,
>>>> and it requires that keys be programmed and evicted by vendor-specific
>>>> SMC calls.  Make the ufs-qcom driver handle these details.
>>>>
>>>> I tested this on Dragonboard 845c, which is a publicly available
>>>> development board that uses the Snapdragon 845 SoC and runs the upstream
>>>> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
>>>> phones.  This testing included (among other things) verifying that the
>>>> expected ciphertext was produced, both manually using ext4 encryption
>>>> and automatically using a block layer self-test I've written.
>>> Hello Eric,
>>>
>>> I am interested in testing out this series on 845, 855 and if possile on 865
>>> platforms. Can you give me some more details about your testing please.
>>>
>> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
>>
>> A basic manual test would be:
>>
>> 1. Build a kernel with:
>>
>> 	CONFIG_BLK_INLINE_ENCRYPTION=y
>> 	CONFIG_FS_ENCRYPTION=y
>> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
> Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.
>
> - Eric

I took a look into this as well - is v12 the latest of the fscrypt
inline crypto patches?

I see a EXPORT_SYMBOL_GPL(fscrypt_inode_uses_inline_crypto) but it seems
like it should be EXPORT_SYMBOL_GPL(__fscrypt_inode_uses_inline_crypto)
otherwise you end up with


WARNING: modpost: "fscrypt_inode_uses_inline_crypto" [vmlinux] is a
static EXPORT_SYMBOL_GPL


when you have something like CONFIG_F2FS_FS=m


Apologies but I'm not sure where the original patchset is to send as a
reply to them.
Eric Biggers May 8, 2020, 8:25 p.m. UTC | #5
On Fri, May 08, 2020 at 03:18:23PM -0500, Steev Klimaszewski wrote:
> 
> On 5/7/20 1:08 PM, Eric Biggers wrote:
> > On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
> >> Hi Thara,
> >>
> >> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
> >>>
> >>> On 5/1/20 12:51 AM, Eric Biggers wrote:
> >>>> From: Eric Biggers <ebiggers@google.com>
> >>>>
> >>>> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
> >>>>
> >>>> The standards-compliant parts, such as querying the crypto capabilities
> >>>> and enabling crypto for individual UFS requests, are already handled by
> >>>> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
> >>>> However, ICE requires vendor-specific init, enable, and resume logic,
> >>>> and it requires that keys be programmed and evicted by vendor-specific
> >>>> SMC calls.  Make the ufs-qcom driver handle these details.
> >>>>
> >>>> I tested this on Dragonboard 845c, which is a publicly available
> >>>> development board that uses the Snapdragon 845 SoC and runs the upstream
> >>>> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
> >>>> phones.  This testing included (among other things) verifying that the
> >>>> expected ciphertext was produced, both manually using ext4 encryption
> >>>> and automatically using a block layer self-test I've written.
> >>> Hello Eric,
> >>>
> >>> I am interested in testing out this series on 845, 855 and if possile on 865
> >>> platforms. Can you give me some more details about your testing please.
> >>>
> >> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
> >>
> >> A basic manual test would be:
> >>
> >> 1. Build a kernel with:
> >>
> >> 	CONFIG_BLK_INLINE_ENCRYPTION=y
> >> 	CONFIG_FS_ENCRYPTION=y
> >> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
> > Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.
> >
> > - Eric
> 
> I took a look into this as well - is v12 the latest of the fscrypt
> inline crypto patches?
> 
> I see a EXPORT_SYMBOL_GPL(fscrypt_inode_uses_inline_crypto) but it seems
> like it should be EXPORT_SYMBOL_GPL(__fscrypt_inode_uses_inline_crypto)
> otherwise you end up with
> 
> 
> WARNING: modpost: "fscrypt_inode_uses_inline_crypto" [vmlinux] is a
> static EXPORT_SYMBOL_GPL
> 
> 
> when you have something like CONFIG_F2FS_FS=m
> 
> 
> Apologies but I'm not sure where the original patchset is to send as a
> reply to them.

The original patchset is at
https://lkml.kernel.org/r/20200430115959.238073-1-satyat@google.com/

Yes, v12 is the latest version, and yes that's a bug.  The export needs double
underscores.  Satya will fix it when he sends out v13.

- Eric
Satya Tangirala May 8, 2020, 8:29 p.m. UTC | #6
On Fri, May 08, 2020 at 01:25:13PM -0700, Eric Biggers wrote:
> On Fri, May 08, 2020 at 03:18:23PM -0500, Steev Klimaszewski wrote:
> > 
> > On 5/7/20 1:08 PM, Eric Biggers wrote:
> > > On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
> > >> Hi Thara,
> > >>
> > >> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
> > >>>
> > >>> On 5/1/20 12:51 AM, Eric Biggers wrote:
> > >>>> From: Eric Biggers <ebiggers@google.com>
> > >>>>
> > >>>> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
> > >>>>
> > >>>> The standards-compliant parts, such as querying the crypto capabilities
> > >>>> and enabling crypto for individual UFS requests, are already handled by
> > >>>> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
> > >>>> However, ICE requires vendor-specific init, enable, and resume logic,
> > >>>> and it requires that keys be programmed and evicted by vendor-specific
> > >>>> SMC calls.  Make the ufs-qcom driver handle these details.
> > >>>>
> > >>>> I tested this on Dragonboard 845c, which is a publicly available
> > >>>> development board that uses the Snapdragon 845 SoC and runs the upstream
> > >>>> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
> > >>>> phones.  This testing included (among other things) verifying that the
> > >>>> expected ciphertext was produced, both manually using ext4 encryption
> > >>>> and automatically using a block layer self-test I've written.
> > >>> Hello Eric,
> > >>>
> > >>> I am interested in testing out this series on 845, 855 and if possile on 865
> > >>> platforms. Can you give me some more details about your testing please.
> > >>>
> > >> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
> > >>
> > >> A basic manual test would be:
> > >>
> > >> 1. Build a kernel with:
> > >>
> > >> 	CONFIG_BLK_INLINE_ENCRYPTION=y
> > >> 	CONFIG_FS_ENCRYPTION=y
> > >> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
> > > Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.
> > >
> > > - Eric
> > 
> > I took a look into this as well - is v12 the latest of the fscrypt
> > inline crypto patches?
> > 
> > I see a EXPORT_SYMBOL_GPL(fscrypt_inode_uses_inline_crypto) but it seems
> > like it should be EXPORT_SYMBOL_GPL(__fscrypt_inode_uses_inline_crypto)
> > otherwise you end up with
> > 
> > 
> > WARNING: modpost: "fscrypt_inode_uses_inline_crypto" [vmlinux] is a
> > static EXPORT_SYMBOL_GPL
> > 
> > 
> > when you have something like CONFIG_F2FS_FS=m
> > 
> > 
> > Apologies but I'm not sure where the original patchset is to send as a
> > reply to them.
> 
> The original patchset is at
> https://lkml.kernel.org/r/20200430115959.238073-1-satyat@google.com/
> 
> Yes, v12 is the latest version, and yes that's a bug.  The export needs double
> underscores.  Satya will fix it when he sends out v13.
> 
> - Eric
Yup, that's the plan. Thanks!
Thara Gopinath May 29, 2020, 3:54 p.m. UTC | #7
On 5/7/20 2:08 PM, Eric Biggers wrote:
> On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
>> Hi Thara,
>>
>> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
>>>
>>>
>>> On 5/1/20 12:51 AM, Eric Biggers wrote:
>>>> From: Eric Biggers <ebiggers@google.com>
>>>>
>>>> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
>>>>
>>>> The standards-compliant parts, such as querying the crypto capabilities
>>>> and enabling crypto for individual UFS requests, are already handled by
>>>> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
>>>> However, ICE requires vendor-specific init, enable, and resume logic,
>>>> and it requires that keys be programmed and evicted by vendor-specific
>>>> SMC calls.  Make the ufs-qcom driver handle these details.
>>>>
>>>> I tested this on Dragonboard 845c, which is a publicly available
>>>> development board that uses the Snapdragon 845 SoC and runs the upstream
>>>> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
>>>> phones.  This testing included (among other things) verifying that the
>>>> expected ciphertext was produced, both manually using ext4 encryption
>>>> and automatically using a block layer self-test I've written.
>>> Hello Eric,
>>>
>>> I am interested in testing out this series on 845, 855 and if possile on 865
>>> platforms. Can you give me some more details about your testing please.
>>>
>>
>> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
>>
>> A basic manual test would be:
>>
>> 1. Build a kernel with:
>>
>> 	CONFIG_BLK_INLINE_ENCRYPTION=y
>> 	CONFIG_FS_ENCRYPTION=y
>> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
> 
> Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.

Hi Eric,

I tested this manually on db845c, sm8150-mtp and sm8250-mtp.(I added the 
dts file entries for 8150 and 8250).

I also ran OsBench test case createfiles[1] on the above platforms. 
Following are the results on a non encrypted and encrypted directory on 
the same file system(lower the number better)

			8250-MTP	8150-MTP	DB845

nonencrypt_dir(us) 	55.3108954	26.8323124    69.5709552
encrypt_dir(us) 	70.0214426	37.5411254    92.3818296



1. https://github.com/mbitsnbites/osbench/blob/master/README.md
Eric Biggers May 29, 2020, 5:13 p.m. UTC | #8
On Fri, May 29, 2020 at 11:54:18AM -0400, Thara Gopinath wrote:
> On 5/7/20 2:08 PM, Eric Biggers wrote:
> > On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
> > > Hi Thara,
> > > 
> > > On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
> > > > 
> > > > 
> > > > On 5/1/20 12:51 AM, Eric Biggers wrote:
> > > > > From: Eric Biggers <ebiggers@google.com>
> > > > > 
> > > > > Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
> > > > > 
> > > > > The standards-compliant parts, such as querying the crypto capabilities
> > > > > and enabling crypto for individual UFS requests, are already handled by
> > > > > ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
> > > > > However, ICE requires vendor-specific init, enable, and resume logic,
> > > > > and it requires that keys be programmed and evicted by vendor-specific
> > > > > SMC calls.  Make the ufs-qcom driver handle these details.
> > > > > 
> > > > > I tested this on Dragonboard 845c, which is a publicly available
> > > > > development board that uses the Snapdragon 845 SoC and runs the upstream
> > > > > Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
> > > > > phones.  This testing included (among other things) verifying that the
> > > > > expected ciphertext was produced, both manually using ext4 encryption
> > > > > and automatically using a block layer self-test I've written.
> > > > Hello Eric,
> > > > 
> > > > I am interested in testing out this series on 845, 855 and if possile on 865
> > > > platforms. Can you give me some more details about your testing please.
> > > > 
> > > 
> > > Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
> > > 
> > > A basic manual test would be:
> > > 
> > > 1. Build a kernel with:
> > > 
> > > 	CONFIG_BLK_INLINE_ENCRYPTION=y
> > > 	CONFIG_FS_ENCRYPTION=y
> > > 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
> > 
> > Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.
> 
> Hi Eric,
> 
> I tested this manually on db845c, sm8150-mtp and sm8250-mtp.(I added the dts
> file entries for 8150 and 8250).
> 
> I also ran OsBench test case createfiles[1] on the above platforms.
> Following are the results on a non encrypted and encrypted directory on the
> same file system(lower the number better)
> 
> 			8250-MTP	8150-MTP	DB845
> 
> nonencrypt_dir(us) 	55.3108954	26.8323124    69.5709552
> encrypt_dir(us) 	70.0214426	37.5411254    92.3818296
> 
> 
> 
> 1. https://github.com/mbitsnbites/osbench/blob/master/README.md
> 

Great, thanks for testing.

Note that the benchmark you ran (creating many small files, then deleting them)
mostly tests the performance of filenames encryption and directory operations,
not file contents encryption.  Inline encryption is only used for file contents.

In fact, since that benchmark doesn't sync the files before deleting them, there
is no guarantee that any file contents are actually written to disk, and hence
no guarantee that inline encryption got used at all.

It would be more relevant to test the performance of reading/writing file data.

Also, did you try doing any correctness tests?  (See what I suggested earlier.)

- Eric
Thara Gopinath May 29, 2020, 9:25 p.m. UTC | #9
On 5/29/20 1:13 PM, Eric Biggers wrote:
> On Fri, May 29, 2020 at 11:54:18AM -0400, Thara Gopinath wrote:
>> On 5/7/20 2:08 PM, Eric Biggers wrote:
>>> On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
>>>> Hi Thara,
>>>>
>>>> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
>>>>>
>>>>>
>>>>> On 5/1/20 12:51 AM, Eric Biggers wrote:
>>>>>> From: Eric Biggers <ebiggers@google.com>
>>>>>>
>>>>>> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
>>>>>>
>>>>>> The standards-compliant parts, such as querying the crypto capabilities
>>>>>> and enabling crypto for individual UFS requests, are already handled by
>>>>>> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
>>>>>> However, ICE requires vendor-specific init, enable, and resume logic,
>>>>>> and it requires that keys be programmed and evicted by vendor-specific
>>>>>> SMC calls.  Make the ufs-qcom driver handle these details.
>>>>>>
>>>>>> I tested this on Dragonboard 845c, which is a publicly available
>>>>>> development board that uses the Snapdragon 845 SoC and runs the upstream
>>>>>> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
>>>>>> phones.  This testing included (among other things) verifying that the
>>>>>> expected ciphertext was produced, both manually using ext4 encryption
>>>>>> and automatically using a block layer self-test I've written.
>>>>> Hello Eric,
>>>>>
>>>>> I am interested in testing out this series on 845, 855 and if possile on 865
>>>>> platforms. Can you give me some more details about your testing please.
>>>>>
>>>>
>>>> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
>>>>
>>>> A basic manual test would be:
>>>>
>>>> 1. Build a kernel with:
>>>>
>>>> 	CONFIG_BLK_INLINE_ENCRYPTION=y
>>>> 	CONFIG_FS_ENCRYPTION=y
>>>> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
>>>
>>> Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.
>>
>> Hi Eric,
>>
>> I tested this manually on db845c, sm8150-mtp and sm8250-mtp.(I added the dts
>> file entries for 8150 and 8250).
>>
>> I also ran OsBench test case createfiles[1] on the above platforms.
>> Following are the results on a non encrypted and encrypted directory on the
>> same file system(lower the number better)
>>
>> 			8250-MTP	8150-MTP	DB845
>>
>> nonencrypt_dir(us) 	55.3108954	26.8323124    69.5709552
>> encrypt_dir(us) 	70.0214426	37.5411254    92.3818296
>>
>>
>>
>> 1. https://github.com/mbitsnbites/osbench/blob/master/README.md
>>
> 
> Great, thanks for testing.
> 
> Note that the benchmark you ran (creating many small files, then deleting them)
> mostly tests the performance of filenames encryption and directory operations,
> not file contents encryption.  Inline encryption is only used for file contents.
> 
> In fact, since that benchmark doesn't sync the files before deleting them, there
> is no guarantee that any file contents are actually written to disk, and hence
> no guarantee that inline encryption got used at all.

Hi Eric,

The results are particularly interesting if you think a sync is not 
happening. There should not be any performance regression in this case 
between the two directories. I can try some reading/writing performance 
tests rather than creating files testing.

> 
> It would be more relevant to test the performance of reading/writing file data.
> 
> Also, did you try doing any correctness tests?  (See what I suggested earlier.)

I did correctness test as part of manual tests by diffing the content of 
the copied files and verifying them. I did not run any other tests you 
mentioned. Feel free to add my Tested-by in the next version you send out.

> 
> - Eric
>
Eric Biggers May 29, 2020, 9:38 p.m. UTC | #10
On Fri, May 29, 2020 at 05:25:47PM -0400, Thara Gopinath wrote:
> > > Hi Eric,
> > > 
> > > I tested this manually on db845c, sm8150-mtp and sm8250-mtp.(I added the dts
> > > file entries for 8150 and 8250).
> > > 
> > > I also ran OsBench test case createfiles[1] on the above platforms.
> > > Following are the results on a non encrypted and encrypted directory on the
> > > same file system(lower the number better)
> > > 
> > > 			8250-MTP	8150-MTP	DB845
> > > 
> > > nonencrypt_dir(us) 	55.3108954	26.8323124    69.5709552
> > > encrypt_dir(us) 	70.0214426	37.5411254    92.3818296
> > > 
> > > 
> > > 
> > > 1. https://github.com/mbitsnbites/osbench/blob/master/README.md
> > > 
> > 
> > Great, thanks for testing.
> > 
> > Note that the benchmark you ran (creating many small files, then deleting them)
> > mostly tests the performance of filenames encryption and directory operations,
> > not file contents encryption.  Inline encryption is only used for file contents.
> > 
> > In fact, since that benchmark doesn't sync the files before deleting them, there
> > is no guarantee that any file contents are actually written to disk, and hence
> > no guarantee that inline encryption got used at all.
> 
> Hi Eric,
> 
> The results are particularly interesting if you think a sync is not
> happening. 

You can check the source code
(https://github.com/mbitsnbites/osbench/blob/master/src/create_files.c).
There's no sync.

> There should not be any performance regression in this case
> between the two directories. 

That's not true; the filenames still need to be encrypted.  Filenames encryption
happens right away, not later when the pages are written to disk.  Contents
encryption works differently.

> I can try some reading/writing performance tests rather than creating files
> testing.
> > 
> > It would be more relevant to test the performance of reading/writing file data.
> > 
> > Also, did you try doing any correctness tests?  (See what I suggested earlier.)
> 
> I did correctness test as part of manual tests by diffing the content of the
> copied files and verifying them. I did not run any other tests you
> mentioned. Feel free to add my Tested-by in the next version you send out.
> 

Okay, thanks!

- Eric
Steev Klimaszewski June 12, 2020, 6:04 p.m. UTC | #11
On 5/8/20 3:25 PM, Eric Biggers wrote:
> On Fri, May 08, 2020 at 03:18:23PM -0500, Steev Klimaszewski wrote:
>> On 5/7/20 1:08 PM, Eric Biggers wrote:
>>> On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
>>>> Hi Thara,
>>>>
>>>> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
>>>>> On 5/1/20 12:51 AM, Eric Biggers wrote:
>>>>>> From: Eric Biggers <ebiggers@google.com>
>>>>>>
>>>>>> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
>>>>>>
>>>>>> The standards-compliant parts, such as querying the crypto capabilities
>>>>>> and enabling crypto for individual UFS requests, are already handled by
>>>>>> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
>>>>>> However, ICE requires vendor-specific init, enable, and resume logic,
>>>>>> and it requires that keys be programmed and evicted by vendor-specific
>>>>>> SMC calls.  Make the ufs-qcom driver handle these details.
>>>>>>
>>>>>> I tested this on Dragonboard 845c, which is a publicly available
>>>>>> development board that uses the Snapdragon 845 SoC and runs the upstream
>>>>>> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
>>>>>> phones.  This testing included (among other things) verifying that the
>>>>>> expected ciphertext was produced, both manually using ext4 encryption
>>>>>> and automatically using a block layer self-test I've written.
>>>>> Hello Eric,
>>>>>
>>>>> I am interested in testing out this series on 845, 855 and if possile on 865
>>>>> platforms. Can you give me some more details about your testing please.
>>>>>
>>>> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
>>>>
>>>> A basic manual test would be:
>>>>
>>>> 1. Build a kernel with:
>>>>
>>>> 	CONFIG_BLK_INLINE_ENCRYPTION=y
>>>> 	CONFIG_FS_ENCRYPTION=y
>>>> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
>>> Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.
>>>
>>> - Eric
>>
> The original patchset is at
> https://lkml.kernel.org/r/20200430115959.238073-1-satyat@google.com/
>
> Yes, v12 is the latest version, and yes that's a bug.  The export needs double
> underscores.  Satya will fix it when he sends out v13.
>
> - Eric

Hi Eric,


I've been testing this on a Lenovo Yoga C630 installed to a partition on
the UFS drive, using a 5.7(ish) kernel with fscrypt/inline-encryption
and a few patches on top that are still in flux for c630 support.  The
sources I use can be found at
https://github.com/steev/linux/tree/linux-5.7.y-c630-fscrypt and the
config I'm using can be found at
https://dev.gentoo.org/~steev/files/lenovo-yoga-c630-5.7.0-rc7-fs-inline-encryption.config.


Everything seems to be working here.  I've run the tests you've
mentioned and haven't seen any issues.


-- Steev
Eric Biggers June 15, 2020, 6:58 p.m. UTC | #12
On Fri, Jun 12, 2020 at 01:04:33PM -0500, Steev Klimaszewski wrote:
> 
> On 5/8/20 3:25 PM, Eric Biggers wrote:
> > On Fri, May 08, 2020 at 03:18:23PM -0500, Steev Klimaszewski wrote:
> >> On 5/7/20 1:08 PM, Eric Biggers wrote:
> >>> On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
> >>>> Hi Thara,
> >>>>
> >>>> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
> >>>>> On 5/1/20 12:51 AM, Eric Biggers wrote:
> >>>>>> From: Eric Biggers <ebiggers@google.com>
> >>>>>>
> >>>>>> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
> >>>>>>
> >>>>>> The standards-compliant parts, such as querying the crypto capabilities
> >>>>>> and enabling crypto for individual UFS requests, are already handled by
> >>>>>> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
> >>>>>> However, ICE requires vendor-specific init, enable, and resume logic,
> >>>>>> and it requires that keys be programmed and evicted by vendor-specific
> >>>>>> SMC calls.  Make the ufs-qcom driver handle these details.
> >>>>>>
> >>>>>> I tested this on Dragonboard 845c, which is a publicly available
> >>>>>> development board that uses the Snapdragon 845 SoC and runs the upstream
> >>>>>> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
> >>>>>> phones.  This testing included (among other things) verifying that the
> >>>>>> expected ciphertext was produced, both manually using ext4 encryption
> >>>>>> and automatically using a block layer self-test I've written.
> >>>>> Hello Eric,
> >>>>>
> >>>>> I am interested in testing out this series on 845, 855 and if possile on 865
> >>>>> platforms. Can you give me some more details about your testing please.
> >>>>>
> >>>> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
> >>>>
> >>>> A basic manual test would be:
> >>>>
> >>>> 1. Build a kernel with:
> >>>>
> >>>> 	CONFIG_BLK_INLINE_ENCRYPTION=y
> >>>> 	CONFIG_FS_ENCRYPTION=y
> >>>> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
> >>> Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.
> >>>
> >>> - Eric
> >>
> > The original patchset is at
> > https://lkml.kernel.org/r/20200430115959.238073-1-satyat@google.com/
> >
> > Yes, v12 is the latest version, and yes that's a bug.  The export needs double
> > underscores.  Satya will fix it when he sends out v13.
> >
> > - Eric
> 
> Hi Eric,
> 
> 
> I've been testing this on a Lenovo Yoga C630 installed to a partition on
> the UFS drive, using a 5.7(ish) kernel with fscrypt/inline-encryption
> and a few patches on top that are still in flux for c630 support.  The
> sources I use can be found at
> https://github.com/steev/linux/tree/linux-5.7.y-c630-fscrypt and the
> config I'm using can be found at
> https://dev.gentoo.org/~steev/files/lenovo-yoga-c630-5.7.0-rc7-fs-inline-encryption.config.
> 
> 
> Everything seems to be working here.  I've run the tests you've
> mentioned and haven't seen any issues.
> 

Great!  Can I add your Tested-by when I send out this patchset again?

- Eric
Steev Klimaszewski June 15, 2020, 7:07 p.m. UTC | #13
On 6/15/20 1:58 PM, Eric Biggers wrote:
>
>> Hi Eric,
>>
>>
>> I've been testing this on a Lenovo Yoga C630 installed to a partition on
>> the UFS drive, using a 5.7(ish) kernel with fscrypt/inline-encryption
>> and a few patches on top that are still in flux for c630 support.  The
>> sources I use can be found at
>> https://github.com/steev/linux/tree/linux-5.7.y-c630-fscrypt and the
>> config I'm using can be found at
>> https://dev.gentoo.org/~steev/files/lenovo-yoga-c630-5.7.0-rc7-fs-inline-encryption.config.
>>
>>
>> Everything seems to be working here.  I've run the tests you've
>> mentioned and haven't seen any issues.
>>
> Great!  Can I add your Tested-by when I send out this patchset again?
>
> - Eric


Absolutely.  Tested-By: Steev Klimaszewski <steev@kali.org> is preferred
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 26f281d9f32a4a..cab5fe76784592 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2236,7 +2236,7 @@  F:	drivers/pci/controller/dwc/pcie-qcom.c
 F:	drivers/phy/qualcomm/
 F:	drivers/power/*/msm*
 F:	drivers/reset/reset-qcom-*
-F:	drivers/scsi/ufs/ufs-qcom.*
+F:	drivers/scsi/ufs/ufs-qcom*
 F:	drivers/spi/spi-geni-qcom.c
 F:	drivers/spi/spi-qcom-qspi.c
 F:	drivers/spi/spi-qup.c
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 5ed3f209f88100..c1a94d99e161ee 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -99,6 +99,7 @@  config SCSI_UFS_DWC_TC_PLATFORM
 config SCSI_UFS_QCOM
 	tristate "QCOM specific hooks to UFS controller platform driver"
 	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
+	select QCOM_SCM
 	select RESET_CONTROLLER
 	help
 	  This selects the QCOM specific additions to UFSHCD platform driver.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 197e178f44bce3..13fda1b697b2a2 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -3,7 +3,9 @@ 
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_CDNS_PLATFORM) += cdns-pltfrm.o
-obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
+obj-$(CONFIG_SCSI_UFS_QCOM) += ufs_qcom.o
+ufs_qcom-y += ufs-qcom.o
+ufs_qcom-$(CONFIG_SCSI_UFS_CRYPTO) += ufs-qcom-ice.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
 ufshcd-core-y				+= ufshcd.o ufs-sysfs.o
 ufshcd-core-$(CONFIG_SCSI_UFS_BSG)	+= ufs_bsg.o
diff --git a/drivers/scsi/ufs/ufs-qcom-ice.c b/drivers/scsi/ufs/ufs-qcom-ice.c
new file mode 100644
index 00000000000000..9e837fdcb0ac2b
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-qcom-ice.c
@@ -0,0 +1,245 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Qualcomm ICE (Inline Crypto Engine) support.
+ *
+ * Copyright (c) 2014-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019 Google LLC
+ */
+
+#include <linux/platform_device.h>
+#include <linux/qcom_scm.h>
+
+#include "ufshcd-crypto.h"
+#include "ufs-qcom.h"
+
+#define AES_256_XTS_KEY_SIZE			64
+
+/* QCOM ICE registers */
+
+#define QCOM_ICE_REG_CONTROL			0x0000
+#define QCOM_ICE_REG_RESET			0x0004
+#define QCOM_ICE_REG_VERSION			0x0008
+#define QCOM_ICE_REG_FUSE_SETTING		0x0010
+#define QCOM_ICE_REG_PARAMETERS_1		0x0014
+#define QCOM_ICE_REG_PARAMETERS_2		0x0018
+#define QCOM_ICE_REG_PARAMETERS_3		0x001C
+#define QCOM_ICE_REG_PARAMETERS_4		0x0020
+#define QCOM_ICE_REG_PARAMETERS_5		0x0024
+
+/* QCOM ICE v3.X only */
+#define QCOM_ICE_GENERAL_ERR_STTS		0x0040
+#define QCOM_ICE_INVALID_CCFG_ERR_STTS		0x0030
+#define QCOM_ICE_GENERAL_ERR_MASK		0x0044
+
+/* QCOM ICE v2.X only */
+#define QCOM_ICE_REG_NON_SEC_IRQ_STTS		0x0040
+#define QCOM_ICE_REG_NON_SEC_IRQ_MASK		0x0044
+
+#define QCOM_ICE_REG_NON_SEC_IRQ_CLR		0x0048
+#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME1	0x0050
+#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME2	0x0054
+#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME1	0x0058
+#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME2	0x005C
+#define QCOM_ICE_REG_STREAM1_BIST_ERROR_VEC	0x0060
+#define QCOM_ICE_REG_STREAM2_BIST_ERROR_VEC	0x0064
+#define QCOM_ICE_REG_STREAM1_BIST_FINISH_VEC	0x0068
+#define QCOM_ICE_REG_STREAM2_BIST_FINISH_VEC	0x006C
+#define QCOM_ICE_REG_BIST_STATUS		0x0070
+#define QCOM_ICE_REG_BYPASS_STATUS		0x0074
+#define QCOM_ICE_REG_ADVANCED_CONTROL		0x1000
+#define QCOM_ICE_REG_ENDIAN_SWAP		0x1004
+#define QCOM_ICE_REG_TEST_BUS_CONTROL		0x1010
+#define QCOM_ICE_REG_TEST_BUS_REG		0x1014
+
+/* BIST ("built-in self-test"?) status flags */
+#define QCOM_ICE_BIST_STATUS_MASK		0xF0000000
+
+#define QCOM_ICE_FUSE_SETTING_MASK		0x1
+#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK	0x2
+#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK	0x4
+
+#define qcom_ice_writel(host, val, reg)	\
+	writel((val), (host)->ice_mmio + (reg))
+#define qcom_ice_readl(host, reg)	\
+	readl((host)->ice_mmio + (reg))
+
+static bool qcom_ice_supported(struct ufs_qcom_host *host)
+{
+	struct device *dev = host->hba->dev;
+	u32 regval = qcom_ice_readl(host, QCOM_ICE_REG_VERSION);
+	int major = regval >> 24;
+	int minor = (regval >> 16) & 0xFF;
+	int step = regval & 0xFFFF;
+
+	/* For now this driver only supports ICE version 3. */
+	if (major != 3) {
+		dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n",
+			 major, minor, step);
+		return false;
+	}
+
+	dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n",
+		 major, minor, step);
+
+	/* If fuses are blown, ICE might not work in the standard way. */
+	regval = qcom_ice_readl(host, QCOM_ICE_REG_FUSE_SETTING);
+	if (regval & (QCOM_ICE_FUSE_SETTING_MASK |
+		      QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK |
+		      QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) {
+		dev_warn(dev, "Fuses are blown; ICE is unusable!\n");
+		return false;
+	}
+	return true;
+}
+
+int ufs_qcom_ice_init(struct ufs_qcom_host *host)
+{
+	struct ufs_hba *hba = host->hba;
+	struct device *dev = hba->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res;
+	int err;
+
+	if (!(ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES) &
+	      MASK_CRYPTO_SUPPORT))
+		return 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!res) {
+		dev_warn(dev, "ICE registers not found\n");
+		goto disable;
+	}
+
+	if (!qcom_scm_ice_available()) {
+		dev_warn(dev, "ICE SCM interface not found\n");
+		goto disable;
+	}
+
+	host->ice_mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(host->ice_mmio)) {
+		err = PTR_ERR(host->ice_mmio);
+		dev_err(dev, "Failed to map ICE registers; err=%d\n", err);
+		return err;
+	}
+
+	if (!qcom_ice_supported(host))
+		goto disable;
+
+	return 0;
+
+disable:
+	dev_warn(dev, "Disabling inline encryption support\n");
+	hba->caps &= ~UFSHCD_CAP_CRYPTO;
+	return 0;
+}
+
+static void qcom_ice_low_power_mode_enable(struct ufs_qcom_host *host)
+{
+	u32 regval;
+
+	regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
+	/*
+	 * Enable low power mode sequence
+	 * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0
+	 */
+	regval |= 0x7000;
+	qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
+}
+
+static void qcom_ice_optimization_enable(struct ufs_qcom_host *host)
+{
+	u32 regval;
+
+	/* ICE Optimizations Enable Sequence */
+	regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
+	regval |= 0xD807100;
+	/* ICE HPG requires delay before writing */
+	udelay(5);
+	qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
+	udelay(5);
+}
+
+int ufs_qcom_ice_enable(struct ufs_qcom_host *host)
+{
+	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
+		return 0;
+	qcom_ice_low_power_mode_enable(host);
+	qcom_ice_optimization_enable(host);
+	return ufs_qcom_ice_resume(host);
+}
+
+/* Poll until all BIST bits are reset */
+static int qcom_ice_wait_bist_status(struct ufs_qcom_host *host)
+{
+	int count;
+	u32 reg;
+
+	for (count = 0; count < 100; count++) {
+		reg = qcom_ice_readl(host, QCOM_ICE_REG_BIST_STATUS);
+		if (!(reg & QCOM_ICE_BIST_STATUS_MASK))
+			break;
+		udelay(50);
+	}
+	if (reg)
+		return -ETIMEDOUT;
+	return 0;
+}
+
+int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
+{
+	int err;
+
+	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
+		return 0;
+
+	err = qcom_ice_wait_bist_status(host);
+	if (err) {
+		dev_err(host->hba->dev, "BIST status error (%d)\n", err);
+		return err;
+	}
+	return 0;
+}
+
+/*
+ * Program a key into a QC ICE keyslot, or evict a keyslot.  QC ICE requires
+ * vendor-specific SCM calls for this; it doesn't support the standard way.
+ */
+int ufs_qcom_ice_program_key(struct ufs_hba *hba,
+			     const union ufs_crypto_cfg_entry *cfg, int slot)
+{
+	union ufs_crypto_cap_entry cap;
+	union {
+		u8 bytes[AES_256_XTS_KEY_SIZE];
+		u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
+	} key;
+	int i;
+	int err;
+
+	if (!(cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE))
+		return qcom_scm_ice_invalidate_key(slot);
+
+	/* Only AES-256-XTS has been tested so far. */
+	cap = hba->crypto_cap_array[cfg->crypto_cap_idx];
+	if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS ||
+	    cap.key_size != UFS_CRYPTO_KEY_SIZE_256) {
+		dev_err_ratelimited(hba->dev,
+				    "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n",
+				    cap.algorithm_id, cap.key_size);
+		return -EINVAL;
+	}
+
+	memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE);
+
+	/*
+	 * The SCM call byte-swaps the 32-bit words of the key.  So we have to
+	 * do the same, in order for the final key be correct.
+	 */
+	for (i = 0; i < ARRAY_SIZE(key.words); i++)
+		__cpu_to_be32s(&key.words[i]);
+
+	err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE,
+				   QCOM_SCM_ICE_CIPHER_AES_256_XTS,
+				   cfg->data_unit_size);
+	memzero_explicit(&key, sizeof(key));
+	return err;
+}
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 19aa5c44e0da6f..37c4070c9007ef 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -365,7 +365,7 @@  static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
 		/* check if UFS PHY moved from DISABLED to HIBERN8 */
 		err = ufs_qcom_check_hibern8(hba);
 		ufs_qcom_enable_hw_clk_gating(hba);
-
+		ufs_qcom_ice_enable(host);
 		break;
 	default:
 		dev_err(hba->dev, "%s: invalid status %d\n", __func__, status);
@@ -614,6 +614,10 @@  static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 			return err;
 	}
 
+	err = ufs_qcom_ice_resume(host);
+	if (err)
+		return err;
+
 	hba->is_sys_suspended = false;
 	return 0;
 }
@@ -1071,6 +1075,7 @@  static void ufs_qcom_set_caps(struct ufs_hba *hba)
 	hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
 	hba->caps |= UFSHCD_CAP_CLK_SCALING;
 	hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+	hba->caps |= UFSHCD_CAP_CRYPTO;
 
 	if (host->hw_ver.major >= 0x2) {
 		host->caps = UFS_QCOM_CAP_QUNIPRO |
@@ -1297,6 +1302,10 @@  static int ufs_qcom_init(struct ufs_hba *hba)
 	ufs_qcom_set_caps(hba);
 	ufs_qcom_advertise_quirks(hba);
 
+	err = ufs_qcom_ice_init(host);
+	if (err)
+		goto out_variant_clear;
+
 	ufs_qcom_set_bus_vote(hba, true);
 	ufs_qcom_setup_clocks(hba, true, POST_CHANGE);
 
@@ -1735,6 +1744,7 @@  static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
 	.dbg_register_dump	= ufs_qcom_dump_dbg_regs,
 	.device_reset		= ufs_qcom_device_reset,
 	.config_scaling_param = ufs_qcom_config_scaling_param,
+	.program_key		= ufs_qcom_ice_program_key,
 };
 
 /**
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index 2d95e7cc71874e..97247d17e258ad 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -227,6 +227,9 @@  struct ufs_qcom_host {
 	void __iomem *dev_ref_clk_ctrl_mmio;
 	bool is_dev_ref_clk_enabled;
 	struct ufs_hw_version hw_ver;
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+	void __iomem *ice_mmio;
+#endif
 
 	u32 dev_ref_clk_en_mask;
 
@@ -264,4 +267,28 @@  static inline bool ufs_qcom_cap_qunipro(struct ufs_qcom_host *host)
 		return false;
 }
 
+/* ufs-qcom-ice.c */
+
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+int ufs_qcom_ice_init(struct ufs_qcom_host *host);
+int ufs_qcom_ice_enable(struct ufs_qcom_host *host);
+int ufs_qcom_ice_resume(struct ufs_qcom_host *host);
+int ufs_qcom_ice_program_key(struct ufs_hba *hba,
+			     const union ufs_crypto_cfg_entry *cfg, int slot);
+#else
+static inline int ufs_qcom_ice_init(struct ufs_qcom_host *host)
+{
+	return 0;
+}
+static inline int ufs_qcom_ice_enable(struct ufs_qcom_host *host)
+{
+	return 0;
+}
+static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
+{
+	return 0;
+}
+#define ufs_qcom_ice_program_key NULL
+#endif /* !CONFIG_SCSI_UFS_CRYPTO */
+
 #endif /* UFS_QCOM_H_ */