diff mbox series

[PATCHv4,1/3] block: add zone specific block statuses

Message ID 20200924205330.4043232-2-kbusch@kernel.org (mailing list archive)
State New, archived
Headers show
Series zoned block device specific errors | expand

Commit Message

Keith Busch Sept. 24, 2020, 8:53 p.m. UTC
A zoned device with limited resources to open or activate zones may
return an error when the host exceeds those limits. The same command may
be successful if retried later, but the host needs to wait for specific
zone states before it should expect a retry to succeed. Have the block
layer provide an appropriate status for these conditions so applications
can distinuguish this error for special handling.

Cc: linux-api@vger.kernel.org
Cc: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
---
 Documentation/block/queue-sysfs.rst |  8 ++++++++
 block/blk-core.c                    |  4 ++++
 include/linux/blk_types.h           | 18 ++++++++++++++++++
 3 files changed, 30 insertions(+)

Comments

Keith Busch Oct. 1, 2020, 9:35 p.m. UTC | #1
On Thu, Sep 24, 2020 at 01:53:28PM -0700, Keith Busch wrote:
> A zoned device with limited resources to open or activate zones may
> return an error when the host exceeds those limits. The same command may
> be successful if retried later, but the host needs to wait for specific
> zone states before it should expect a retry to succeed. Have the block
> layer provide an appropriate status for these conditions so applications
> can distinuguish this error for special handling.

Hi Jens,

Just checking in -- do you have any thoughts on this, or should I just
wait a bit more?

thx,
Keith
Keith Busch Oct. 9, 2020, 3:29 p.m. UTC | #2
On Thu, Sep 24, 2020 at 01:53:28PM -0700, Keith Busch wrote:
> A zoned device with limited resources to open or activate zones may
> return an error when the host exceeds those limits. The same command may
> be successful if retried later, but the host needs to wait for specific
> zone states before it should expect a retry to succeed. Have the block
> layer provide an appropriate status for these conditions so applications
> can distinuguish this error for special handling.

Hi Jens,

Can be considered for inclusion? The series still applies cleanly to
block for-next.
Keith Busch Oct. 13, 2020, 5:16 p.m. UTC | #3
Hi Jens,

I'm going to try one more time in the hope you've just been too busy to
notice these patches. The series has been unchanged for a month now, and
has reviews from all the right people. Can this be considered for
inclusion?
Jens Axboe Oct. 13, 2020, 7:25 p.m. UTC | #4
On 10/13/20 11:16 AM, Keith Busch wrote:
> Hi Jens,
> 
> I'm going to try one more time in the hope you've just been too busy to
> notice these patches. The series has been unchanged for a month now, and
> has reviews from all the right people. Can this be considered for
> inclusion?

Thanks for the pings, finally got them picked up. Sorry about the
delay!
diff mbox series

Patch

diff --git a/Documentation/block/queue-sysfs.rst b/Documentation/block/queue-sysfs.rst
index f261a5c84170..2638d3446b79 100644
--- a/Documentation/block/queue-sysfs.rst
+++ b/Documentation/block/queue-sysfs.rst
@@ -124,6 +124,10 @@  For zoned block devices (zoned attribute indicating "host-managed" or
 EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, is limited by this value.
 If this value is 0, there is no limit.
 
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_ACTIVE_RESOURCE, which user space may see as the EOVERFLOW
+errno.
+
 max_open_zones (RO)
 -------------------
 For zoned block devices (zoned attribute indicating "host-managed" or
@@ -131,6 +135,10 @@  For zoned block devices (zoned attribute indicating "host-managed" or
 EXPLICIT OPEN or IMPLICIT OPEN, is limited by this value.
 If this value is 0, there is no limit.
 
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_OPEN_RESOURCE, which user space may see as the ETOOMANYREFS
+errno.
+
 max_sectors_kb (RW)
 -------------------
 This is the maximum number of kilobytes that the block layer will allow
diff --git a/block/blk-core.c b/block/blk-core.c
index 10c08ac50697..8bffc7732e37 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -186,6 +186,10 @@  static const struct {
 	/* device mapper special case, should not leak out: */
 	[BLK_STS_DM_REQUEUE]	= { -EREMCHG, "dm internal retry" },
 
+	/* zone device specific errors */
+	[BLK_STS_ZONE_OPEN_RESOURCE]	= { -ETOOMANYREFS, "open zones exceeded" },
+	[BLK_STS_ZONE_ACTIVE_RESOURCE]	= { -EOVERFLOW, "active zones exceeded" },
+
 	/* everything else not covered above: */
 	[BLK_STS_IOERR]		= { -EIO,	"I/O" },
 };
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 4ecf4fed171f..8603fc5f86a3 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -103,6 +103,24 @@  typedef u8 __bitwise blk_status_t;
  */
 #define BLK_STS_ZONE_RESOURCE	((__force blk_status_t)14)
 
+/*
+ * BLK_STS_ZONE_OPEN_RESOURCE is returned from the driver in the completion
+ * path if the device returns a status indicating that too many zone resources
+ * are currently open. The same command should be successful if resubmitted
+ * after the number of open zones decreases below the device's limits, which is
+ * reported in the request_queue's max_open_zones.
+ */
+#define BLK_STS_ZONE_OPEN_RESOURCE	((__force blk_status_t)15)
+
+/*
+ * BLK_STS_ZONE_ACTIVE_RESOURCE is returned from the driver in the completion
+ * path if the device returns a status indicating that too many zone resources
+ * are currently active. The same command should be successful if resubmitted
+ * after the number of active zones decreases below the device's limits, which
+ * is reported in the request_queue's max_active_zones.
+ */
+#define BLK_STS_ZONE_ACTIVE_RESOURCE	((__force blk_status_t)16)
+
 /**
  * blk_path_error - returns true if error may be path related
  * @error: status the request was completed with